Design the control circuit using a pla and d flip-flops

Assignment Help Other Engineering
Reference no: EM131005216

A serial Boolean logic unit has two 16-bit shift registers,A and B.A control signal (C) is used to select the Boolean operation to be performed .

If C = o, the contents of A are serially replaced by the bit-by-bit Boolean AND of A and B. If C = 1, the contents of A are serially replaced by the bit-by-bit exclusive-OR of A and B. After the numbers have been placed in A and B, and C is set to o or 1, a start signal (St) sets the circuit in operation. A counter is used to count the number of shifts. When the counter reaches state 15, it outputs a signal K = 1, which causes the control circuit to stop after one more shift. Assume that St remains 1and C does not change until the operation is completed.The control then remains in the stop state until St is changed back to o.

(a) Draw a block diagram of the system,which includes the shift registers, the counter, the control circuit, and a logic circuit that generates the serial input (SI) to theA register.

(b) Draw a state graph for the control circuit (three states).

(c) Design the control circuit using a PLA and D flip-flops.

(d) Design a logic circuit that generates SI.

Reference no: EM131005216

Questions Cloud

What is the effective annual interest rate : What is NIC's lease liability at the inception of the lease (after the first payment)? What is the asset's residual value expected at the end of the lease term?
Define intelligence and intelligence testing : Define intelligence and intelligence testing. Describe how intelligence testing is used as a means of assessing normal intelligence and targeting special needs children
Interest rate stimulus-inflation and money supply : The Federal Reserve Board under the direction of Janet Yellen is keeping interest rates at amazingly low levels. What are the benefits and consequences of taking on such action? Include in your answer issues as interest rate stimulus, inflation, mone..
Use the economic order quantity formula to work out : A film processing laboratory uses 37.5 liters of developer per week and is open for business 50 weeks in a year. Administrative and other costs of ordering a consignment of developer are $15 and it costs $10 to keep one liter of developer in stock fo..
Design the control circuit using a pla and d flip-flops : Assume that St remains 1and C does not change until the operation is completed.The control then remains in the stop state until St is changed back to o. Draw a block diagram of the system,which includes the shift registers, the counter, the c..
Analyze the roles and responsibilities of financial managers : Analyze the roles and responsibilities of financial managers in confirming compliance with federal and shareholder requirements - differentiate between various financial markets and institutions by comparing and contrasting options when selecting ..
Create emotional branding to position their brands : Emotional branding is becoming an important way to connect with customers and create differentiation from competitors. How can companies create emotional branding to position their brands? What are some examples of companies (other than from the text..
Rationally ignorant about the proper therapy for gallstones : Is the idea of demand useful in healthcare, given the important role of agents? Should medical services be free? Justify your answer. Why might a consumer be “rationally ignorant” about the proper therapy for gallstones? Why do demand curves slope do..
How long should the wire he cut so that its mass is m kg : A long wire situated on the positive x-axis, with the left at the origin has density δ{x) = x3 (kg/m) at a point x > 0. How long should the wire he cut so that its mass is M kg?

Reviews

Write a Review

Other Engineering Questions & Answers

  The importance of impedance, rise-time and bandwidth

Discuss the connection between rise-time and bandwidth in amplifier circuits.

  Formulate a linear programming model for problem

Formulate a linear programming model for problem. Define decision variables, and then define your constraints and objective function accordingly. Combine everything to get the final model.

  Estimate the final water temperature

Liquid water at 30.0°C and liquid water at 90.0°C are combined in a ratio (1 kg cold water/2 kg hot water). (a) Use a simple calculation to estimate the final water temperature. For this part, pretend you never heard of energy balances.

  Prepare young engineers through hands on experience

It is desired to design a system to keep a 1-million-galon capacity water tank filled. The plan is to use a centrifugal pump to fill the tank with chilly water (10 oC) ground water from an aquifer, which is 0.8 mi away from the tank and 150 ft low..

  What is the voluthetric flow capacity of the cyclone

A cyclone of 0.5 m body diameter has an Eu value of 50 and an Stk50 value of 5 x 10-3. Using an aliiwble pressure drop of 1200 Pa, what is the voluthetric flow capacity of the cyclone and the cut size

  Estimate the power spectrum of a signal

The Bartlett method is used to estimate the power spectrum of a signal from a sequence x(n) consisting of N = 2400 samples.

  Determine temperature and quality of exiting stream

Water at 50°F and 50 psia is heated in a chamber by mixing it with saturated water vapor at 50 psia. If both streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream.

  Ow do the near-architectural element fit with the lush paint

What does the diagonal of the bed provide? Now move close and examine the paint work. How do the near-architectural elements fit with the lush paint?

  What is the optimal production plan for jumbo

What is the optimal production plan For Jumbo. assuming no promotion by either Jumbo or Shrimpy'? What are the annual profits for Jumbo?

  Preparing a cash budget

Analyze the steps involved in preparing a cash budget and determine which steps presents the greatest number of obstacles to the greatest number of small businesses

  Determine the vehicles aerodynamic drag coefficient

Using the supplied 3D model of the commercial vehicle available on Moodle and solidworks flowsimulation conduct a CFD analysis to determine the vehicles aerodynamic drag coefficient.

  Control the functions of motion detection camera device

My RISC machine automates a motion detection camera by automaticall triggering the record function of the camera when motion is detected.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd