### Design speed station of the pc station of the pt deflection

Assignment Help Civil Engineering
##### Reference no: EM13546931

A horizontal Curve is designed for a two lane mountainous terrain. The following data are known. intersection angle: 40 degrees tangent length: 436.76 ft Station on PI: 2700+10.65 fs=0.12 e=0.08 Find the following Design speed Station of the PC Station of the PT Deflection Angle and chord length to the first even 100 ft station

### Write a Review

#### Find what is the maximum you would pay for the bond

A 10-year \$2000 Bond with a coupon rate of 10% paid semi-annually is available for purchase. What is the maximum you would pay for this bond if your MARR (without inflation) is 6%, and you estimate an inflation rate of 3% annually

#### Estimate the size of a uniform horizontal welded-steel pipe

Estimate the size of a uniform, horizontal welded-steel pipe installed to carry 14.0 ft^3/sec of water 20 degreesC. The allowable pressure loss resulting from friction is 17ft/mi of pipe length.

#### Compose a list here of the geological terms

Was the dam itself of sound design and a product of quality construction?

#### Briefly explain reason for variation of water coefficient

A homogeneous coarse sand deposit has a water table at 10 m depth. The water coefficient of permeability of the sand is found to vary significantly with height above the water table even though the sand deposit is homogeneous.

#### Determine the properties at the final state and the amount

Two tanks (Tank A and Tank B) are separated by a partition. Initially Tank A contains 2 kg of steam at 1 MPa and 300 ?C while Tank B contains 3 kg of saturated liquid-vapor mixture at 150oC with a vapor mass fraction of 50%

#### Develop a simple urban constructed wetland design

Develop a simple urban constructed wetland design.

#### Determine the coefficient of friction

a mass of 2kilogram is projected with a speed of 3m/s.if a plane inclined 20 degrees with the horizontal.after travelling travelling 0.8meters, the mass comes to rest. determine the coefficient of friction and also the speed as the black returns t..

#### Find v and q by hazen-williams for a new cast iron pipe

The 12 in diameter cast iron pipe is 2000ft long, the water surface is El 200 in the reservoir on the left B. El 175 on the right. A. Find V and Q by hazen-williams for a new cast iron pipe (Chw=130) Neglect entrance, exit and local losses.

#### Find the flow rate if the pump puts 22 hp in to the flow

At A, the pipe diameter is 24 in and the pressure is 45 psi. At B, the pipe diameter is 12 in and the pressure is 50 psi. Point B is 3 f t lower than A. Find the flow rate if the pump puts 22 hp (16 kW) in to the flow. Neglect head losses.

#### Construct a v-t graph and an a-t graph at time interval t

A particle begins from s=0 and is traveling along a straight path at a velocity of v=(t^2-4t+3) m/s, where t is in seconds. Construct a v-t graph and an a-t graph at the time interval t=0 to t=4 s.

#### 1a draw the fbd and the shear and bending moment diagrams

1a draw the fbd and the shear and bending moment diagrams for the beam shown in figure i. label all minimums maximums

#### Find excess solids production of extended aeration process

Estimate teh excess solids production of an extended aeration process treating unsettled wastewater with a BOD of 200 mg/l and suspended solids concentration of 240 mg/l, assuming k=0.35.