Design of wastewater treatment plant for a community

Assignment Help Civil Engineering
Reference no: EM1384917

Consider the design of wastewater treatment plant for a community wiyh average daily and peak hourly wastewater design flows of 2.0 mgd. The raw sewage has an average of 230 mg/l BOD5 and 260 mg/l of suspended solids.

Reference no: EM1384917

Questions Cloud

Nation of immigrants : The United States is a nation of immigrants. There is a great deal of controversy over issues of undocumented immigration. What is the historical pattern of immigration concerns in the economy?
Is it condemnable from the perspective of moral character : is it condemnable from the perspective of moral character? If so and if the action or policy is legally required to do business in the host country; then is the ethical violation significant enough to require withdrawal from which country?
What speed does the alpha particle have while it is emitted : Two particles are fixed on x-axis. Particle 1 of charge q1 = -2×10^-7 C at x = 20 cm and particle 2 of charge q2 = +8×10^-7 C at x = 70 cm. At what x coordinate on the axis is net electric field produced by the particles equal to zero.
Cross between a blue and a colorless strain : 2-mutant, colorless strains of the (fictitious) haploid fungus Cyanomyces are crossed. The progeny consists of 50% wild-type and 50 percent mutant spores.
Design of wastewater treatment plant for a community : Consider the design of wastewater treatment plant for a community wiyh average daily and peak hourly wastewater design flows of 2.0 mgd. The raw sewage has an average of 230 mg/l BOD5 and 260 mg/l of suspended solids.
Identify some of the key processes that need improvement : Identify some of the key processes that need improvement in your organization associated with the following: sales, marketing, customer service, supply chain management
Explain how much would working capital need to be reduced : Explain how much would working capital need to be reduced and/or profit margin increased? Illustrate what steps do you recommend the corporation to take
Minimize the occurence of hate crimes : Who are some targets and/or victims of hate crimes? What are some of the causes and effects of these crimes? What actions can be taken to minimize the occurence of hate crimes?
Determine a sequence that will minimize makespan time : hetimes required to complete each of eight jobs in a two-machine flow shop are shown in the table that follows. Each job must follow the same sequence, beginning with machine A and moving to Machine B.

Reviews

Write a Review

Civil Engineering Questions & Answers

  F-m ration for conventional activated sludge plant

A 4000-m 3 /day conventional activated sludge plant has an influent with a BOD5 of 190 mg/L and SS of 225 mg/L. What population would this plant serve?

  Dry unit weight of material

A soil borrow material in its natural state in the ground has a unit weight of 118pcf. Its natural water content is 7%. What is the dry unit weight of this material?

  Depreciation using straight line-double declining balance

Calculate the depreciation using straight-line, double-declining-balance (DBB), and MACRS (current IRS regulation) methods; and tabulate the depreciation schedule.

  Value of the mass of the cylinder

A one meter diameter cylindrical mass is connected to a 2 meter wide rectangular gate. the gate is to open when the water level drops below 2.5 meters. Determine the required value of the mass of the cylinder in kgs.

  Effective vertical stresses of the clay layer

The saturated unit weight of the clay is 20kN/m 3 and that of the sand 19 kN/m 3 ; above the water table the unit weight of the sand is 16.5 kN/m 3 . Calculate the effective vertical stresses at the top and bottom of the clay layer.

  Calculate the molar mass of the biomolecule

A 2.50-g sample of a large biomolecule was dissolved in 13.0 g of carbon tetrachloride. The boiling point of this solution was determined to be 77.85°C. Calculate the molar mass of the biomolecule.

  Freeways density and level of service

What will the freeway's density and level of service be before and after the ban? (Assume that the trucks are removed and all other traffic attributes are unchanged).

  Required height of the roller coaster

Determine the required height h of the roller coaster so that when it is essentially at rest at the crest of the hill it will reach a speed v= 100km/hr when it comes to the bottom.

  Measure the distance pa, pb, pc

Measure the distance PA, PB, PC etc. from p to various point with chain or tape and plot them to scale along the co responding rays. Join the points a, b, c, etc. to give outline of survey.

  Largest acceptable value of distance for removing a nail

To remove a nail, a small block of wood is placed under a crowbar, and a horizontal force P is applied as shown. Knowing that the maximum vertical force needed to extract the nail is 2600 N and that the horizontal force P is not to exceed 290 N, d..

  Projectile shot vertically upward

The height (in meters) of a projectile shot vertically upward from a point 2 m above ground level with an initial velocity of 24.5 m/s is h2+24.5t-4.9t^2 after t seconds. a) When does the projectile reach its maximum height? b) What is the maximum..

  Standard test method for flash and fire points

What is the procedure standard test method for flash and fire points by cleveland open cup tester if there is animation or video is better....

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd