Design logic for this box to implement signaling function

Assignment Help Civil Engineering
Reference no: EM131317269

The Massachusetts Bay Transportation Authority (MBTA) has just awarded you a contract to revamp the signaling system on its Green Line. You have decided upon the following basic approach: Each section of track will have a sensor to determine whether there is a train in that section and a signal with red, yellow, and green lights. You want the light in a track section to show red if there is a train in the very next section, yellow if there is no train in the next section but the section after that is occupied, and green otherwise. You decide to place a logic module, shown schematically below, under each section of track:

882_image2.png

Tracks are one-way only, and trains move left to right relative to the track control module. The outputs G, Y, and R should be a 1 to light the green, yellow, and red signals, respectively, for this section of track. The input P is 1 if there is a train in this section. The signals Ai and Bi are received from the next section, and outputs A, and Bo are passed back to the previous section. You may do with these what you like, but there are only two wires available, and you may not add more.

A. Design the logic for this box to implement the signaling function. Describe what use you have made of lines A and B.

B. Under switches that merge two incoming tracks into one outgoing track, you will need to put a special kind of module:

1596_image1.png

This module operates like a regular track control module except that it signals red in the previous section (and yellow in the section before that) to trains coming from the direction the switch is not currently set to accept. The input S is 1 if the switch is set straight, 0 if it is turned. Give a logic diagram for this new module. You need not worry about logic modules for switches that split one incoming track into two outgoing tracks.

Reference no: EM131317269

Questions Cloud

What is your expected real rate of return : Canadian Treasury bills with 1-year to maturity have a yield to maturity of 0.98% peryear. If you expect inflation to be 1.4% per year over the upcoming year, what is your expected real rate of return?
Draft a memo to the ceo explaining the new programs : Draft a memo to the CEO explaining the new international compensation program. In your memo you will need to describe the exact level of pay and benefits you want to commit to the program. For the purposes of this exercise you can assume that all ..
What is the current share price : What is the current share price? (Do not round intermediate calculations and round your final answer to 2 decimal places. (e.g., 32.16))
Who is considered the father of expressionism : Who is considered the father of Expressionism? What artistic development is characterized by unique compositions, S-like shapes, elegance, and a lack of emotion
Design logic for this box to implement signaling function : The input S is 1 if the switch is set straight, 0 if it is turned. Give a logic diagram for this new module. You need not worry about logic modules for switches that split one incoming track into two outgoing tracks.
Point of view about the concept of risk and return : 1. Write your point of view about the concept of risk and return. Do you think they are related? What is the relationship, why is there one and how are they related?
What is the natural rate of unemployment : What is the natural rate of unemployment? Do you believe the answer given in (b)? Why or why not? (Hint: Think about how people are likely to form expectations of inflation.)
How will your promotion strategies address the diversity : Explain your rationale for choosing your three tactics for your IMC campaign (be sure to incorporate concepts from the course to support your rationale!). Your rationale should align with the marketing strategy you have already chosen.If you were ..
What social and economic conditions support : (a) What social and economic conditions support and encourage healthy choices? (b) What social and economic structures affect health that have nothing to do with individual choices?

Reviews

Write a Review

Civil Engineering Questions & Answers

  How to determine the critical depth by interpolation

water flows from a lake into a steep natural channel. the water surface elevation of the lake is 97.0 with respect to the datum. the channel properties are given below. determine the flow rate in the channel

  How far downstream would you establish barricades

The fire department proposes to approach the truck from the upstream side and heavily spray the truck with water to prevent an explosion. Will this help to reduce the chlorine concentration downstream?

  Determine how much power will be required above sea level

If I raise a 1000 lbf weight 100 feet above sea level on earth in 10 seconds how much power will be required

  What is the elevation for station

Station 0+00 is at BM which has an elevation of 508.97. During the survey, the backsight (BS) to this monument is recorded as 10.92. The level is then turned to sta 1+48, and the foresight (FS) is recorded as 13.14. Next the level is moved to a new p..

  How much time have you got to move equipment from the top

You are in charge of the construction site of a new dam. Extremely heavy rainfall starts and Bureau of Meteorology hydrologists tell you that beginning at about 8 AM, 2 GL per hour (2 x 106 m3 per hour) will flow into the dam. The lake behind the dam..

  Find temperature to achieve the required concentration

The initial concentration of carbon in the metal is 0.1wt%. We first do an experiment by applying a concentration of 5%wt of carbon at the surface of a similar slab and maintaining the system at 900 K for an hour.

  Find the deflection at the loaded point c

The problem shown models a beam with supports at A and B that are compliant. Determine the deflection at the loaded point C. (Hint: you can solve this by treating it as one simply supported beam with a single load, which is then rigidly displaced ..

  Different components of all types of earth fill dam

Draw a neat proportionate free hand sketch of a typical earth filled dam showing all the components and describe their functions.

  Compute the nominal compressive strength for a500 grade

A block with an inclination of 20 degrees has a weight of 60kg, a height of 1.8m and width 1m, static friction is 0.3, what is the force needed and the height (where the force in the box should be) to pish it upwards

  What volume of ash would be collected by the pollution

If the density of the ash is 650 kg/m^3, what volume of ash would be collected by the pollution control measures at this facility each month? Assume 1 month = 30 days.

  Determine what is the adiabatic efficiency of the turbine

At the inlet the steam is at 1 MPa and 320 C, and leaves the turbine at 20 kPa. The work output of the turbine is measured to be 600 kJ/kg (of steam passing through the turbine).

  Calculate the total entropy generation due to this process

A cylinder/piston contains 5 lbm water at 80 lbf /in.2, 1000 F. The piston is restrained by a linear spring so when the system cools down due to heat transfer to the room at 70 F the water reaches a state of 80 F, x = 0.05. Calculate the total ent..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd