Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
Design and draw a Ring Watch project in solid works 2013-2014 or auto-cad, the drawing should be detailed and specefic and it should be 2D/3D cad,
The solid works drawing and it should be in the required version.
A stainless steel (304) bar with a cross section of 0.2" x 0.4" is cut to a length of 30" and placed between two immovable walls at a temperature of 40 degrees F. The operating temperature for the bar is 200 degrees F.
A U manometer reads 20 cm air as operating fluid and a given manometric fluid. A single branch closed tube reads 35 cm connected to point 1. If P2 = 1.2 ATM calculate the pressure in point 1 and the density of the manometric fluid.
Find the volume of the solid S. The base of S is the region enclosed by the parabola y=4-3x^(2) and the x-axis. Cross sections perpendicular to the y-axis are squares.
The beam has a flange width b=8 in. If the maximum bending stress is not to exceed σallow=22 ksi, determine thegreatest weight of the machine that the beam can support. The center of gravity for the machine is at G, and the supports at Band C are smo..
How many tons of asphalt concrete will be required to overlay a 3-mile-long, 24-ft.-wide road with 2.5 in. of wearing course asphalt concrete that has a density of 146.3 pcf
A cantilevered W12x136 (ASTM-A36) steel member beam is 18 ft in length. If a concentrated load of 12 kips is applied at a point 6.25 ft from the beam's free end, use the superposition technique to find:
a simple rankine cycle uses water as the working fluid. the boiler operates at 6000 kpa and the condenser at 50 kpa. at
A bus strike will eliminate all bus traffic, but it is estimated that for each bus removed from the roadway, seven additional passenger vehicles will be added as travelers seek other means of travel. What are the density, volume-to-capacity ratio,..
Perform a material balance on substrate (S) around a chemostat (completely mixed reactor without recycle) assuming a first-order removal for a substrate with a rate constant of 0.5 hr-1.
seven hundred sixty-five meters cubed of solid waste is dumped ate the site 5 days a week. This waste is compacted to twice its delivered density. Estimate the expected life of the landfill in years.
A scientist plans to build a water barometer. When the atmospheric pressure is 990 mb abs and the water temperature is 70 degrees Celsius, what would you expect the barometer reading (water rise) to be?
A W16 x 36 simply supported beam is 30 ft long and supports auniform dead load of 970 lb/ft, a roof live load of 240 lb/ft and asnow load of 270 lb/ft. Is this beam adequate to support the load
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd