Design and describe a single tuning circuit

Assignment Help Other Engineering
Reference no: EM132345863 , Length: word count:3000

Cyber Engineering Assignment -

Learning Outcomes -

1. Critically analyse various communication technologies for large building environment.

2. Designing and understanding of various communication engineering components.

3. Capabilities to design a desired FM transmitter with the available resources.

Tasks -

1. Design and describe a single tuning circuit that can receive frequencies of 96MHz, 100MHz and 104MHz. What are the mechanisms to avoid the side channel noise and improve the frequency selection?

2. Design and describe an indirect FM modulator to generate an FM carrier with the carrier frequency of 96MHz and frequency deviation of 20KHz. A narrow band FM generator with carrier frequency of 200KHz and adjustable frequency deviation in the range of 9 to 10 Hz is available. The stock room also has an oscillator with adjustable frequency in the range of 9 to 10MHz. There is a band pass filter with any center frequency, and only frequency doublers are available.

3. Develop and describe a network communication model for any large building application of your choice (educational institute or industry etc.) utilising at least two different technologies among Bluetooth, GSM, RFID and CAN. (10 MARKS) Develop a protocol for each of the following scenario along with its message scheduling policy.

1. Identification of a person when enters into the building.

2. Handling an emergency scenario.

Attachment:- Cyber Engineering Assignment File.rar

Reference no: EM132345863

Questions Cloud

Bank still maintain a zero profit : What is the maximum that the € can appreciate and the bank still maintain a zero profit? Show all your work and discuss your results
Average maturity of two years paying interest rates : Bank ABC has liabilities of $4 million with an average maturity of two years paying interest rates of 4.0 percent annually.
Calculate the return in percent to four decimal places : Calculate the return, in percent to four decimal places, of the stock market for June 4.
What is the price of a share of stock : What is the price of a share of stock if the beta is? 2, its next dividend is projected to be $3?, and its growth rate is expected
Design and describe a single tuning circuit : CTEC5805 Cyber Engineering Assignment, De Montfort University - Leicester, UK. Design and describe a single tuning circuit
What will your monthly payment be : What will your monthly payment be? (Do not round intermediate calculations and round your answer to 2 decimal places, e.g., 32.16.)
What is the most you would pay for the? stock : You will receive $ 0.85 per year in? dividends, and then you expect to sell it for $22. If the required return is 10%
Create rough outline of a business plan for your approved : Create a rough outline of a business plan for your approved. You can use headings and bullet points to do this. Post your outline for feedback.
What is the ratio of debt to total long-term capital : If the current ratio is 1.5, what is the ratio of debt to total long-term capital?

Reviews

len2345863

7/25/2019 11:24:55 PM

Maximum word limit: 3000 words for main task(s). It does not include cover page, ToC, references and appendices. Where word limits are specified, answers can exceed the word limit by up to 10% without penalty; then a penalty of 20% of the marks for answers that exceed the word limit by up to 30%. The part of any answer that exceeds the word limit by over 30% would not be marked and hence not contribute to the final mark. Note: The breakdown of 20 marks for each scenario in task 3 is: 10 Marks for protocol development and explanation, 5 marks for message scheduling diagram and 5 marks for message scheduling diagram explanation.

len2345863

7/25/2019 11:24:49 PM

Late submission of coursework policy: Late submissions will be processed in accordance with current University regulations which state: “the time period during which a student may submit a piece of work late without authorisation and have the work capped at 40% [50% at PG level] if passed is 14 calendar days. Work submitted unauthorised more than 14 calendar days after the original submission date will receive a mark of 0%. These regulations apply to a student’s first attempt at coursework. Work submitted late without authorisation which constitutes reassessment of a previously failed piece of coursework will always receive a mark of 0%.” Word Limits.

len2345863

7/25/2019 11:24:44 PM

Marking Rubric - Work is fully complete. All sections have been thought out and described in detail. Excellent understanding of the underlying topic is displayed by the student. Topic is comprehensively covered and reasoned. Excellent critical analysis is demonstrated. Decisions have been well researched and thought out. All possible outcomes and their security implications are assessed and presented in a clear and concise manner. The report is excellently written and enjoyable to read. References are complete and of a high standard.

Write a Review

Other Engineering Questions & Answers

  Characterization technology for nanomaterials

Calculate the reciprocal lattice of the body-centred cubic and Show that the reciprocal of the face-centred cubic (fcc) structure is itself a bcc structure.

  Calculate the gasoline savings

How much gasoline do vehicles with the following fuel efficiencies consume in one year? Calculate the gasoline savings, in gallons per year, created by the following two options. Show all your work, and draw boxes around your answers.

  Design and modelling of adsorption chromatography

Design and modelling of adsorption chromatography based on isotherm data

  Application of mechatronics engineering

Write an essay on Application of Mechatronics Engineering

  Growth chracteristics of the organism

To examine the relationship between fermenter design and operating conditions, oxygen transfer capability and microbial growth.

  Block diagram, system performance and responses

Questions based on Block Diagram, System Performance and Responses.

  Explain the difference in a technical performance measure

good understanding of Mil-Std-499 and Mil-Std-499A

  Electrode impedances

How did this procedure affect the signal observed from the electrode and the electrode impedances?

  Write a report on environmental companies

Write a report on environmental companies

  Scanning electron microscopy

Prepare a schematic diagram below of the major parts of the SEM

  Design a pumping and piping system

creating the pumping and piping system to supply cool water to the condenser

  A repulsive potential energy should be a positive one

Using the data provided on the webvista site in the file marked vdw.txt, try to develop a mathematical equation for the vdW potential we discussed in class, U(x), that best fits the data

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd