Design a direct-coupled inverting op amp with a gain

Assignment Help Electrical Engineering
Reference no: EM131226877

Design a direct-coupled inverting op amp with a gain of -100 VN, the highest possible input resistance, and an output offset 50.5 V. using an op amp with 2 mV offset, and bias currents of 1 pA equal to within ±10%. What is Ra, of your design?

Reference no: EM131226877

Questions Cloud

What input offset voltage is required : For an amplifier operating with 1-4 V saturation limits at a closed-loop gain of -100 VN, what input offset voltage is required to assure less than 1% reduction in output swing capability due to offset?
State the four-fold pattern of risk attitudes : What is the name given to a failure to diversify one's portfolio internationally? Describe the problem. (b) In your own words, provide a behavioral explanation for this tendency.
Price of one share of stock : The dividend is expected to grow at the rate of 4% per year. If the appropriate discount rate for this investment is 14%, what is the price of one share of this stock?
Determine the new dominant pole frequency : Determine the new dominant pole frequency  and phase margin if the compensation capacitor is increased to CF = 75 pF.
Design a direct-coupled inverting op amp with a gain : Design a direct-coupled inverting op amp with a gain of -100 VN, the highest possible input resistance, and an output offset 50.5 V. using an op amp with 2 mV offset, and bias currents of 1 pA equal to within ±10%. What is Ra, of your design?
Evaluate difference between different type of payment method : Analyze the market forces that would favor using one reimbursement method over another. Evaluate the key differences between different types of payment methodologies from the provider and hospital point of view.
What do you estimate the input offset voltage to be : Now, if the 10 kΩ resistor connected to the amplifier's negative input terminal is capacitor-coupled to ground, what does the output offset voltage become? What must you now do to compensate? What does the output offset voltage now become?
Determine the phase margin of the amplifier : The open-loop amplifier of a feedback system has its first two poles- What is the dominant pole frequency?  -Determine the phase margin of the amplifier.
Brief response to these potential objections : As a community member, submit a one-paragraph article that details your reasonable objections to the proposed project. As a student, follow up with a brief response to these potential objections.

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Compute output signal power in mw and signal-to-noise ratio

An erbium-doped fiber amplifier has a noise figure of 4 and a gain of 10 dB. The optical input has a 30-dB signal-to-noise ratio and a signal power of 10 µW. Compute the output signal power in mW and signal-to-noise ratio (in dB) at the amplifier'..

  Development in conducting polymers in terms

A professional report about the last development in conducting polymers in terms of its uses and experimental methods of produce it , It must contain: 1-last Experimental development methods of producing it and identify one experiment and identify..

  What must be done to change power factor to 0.85 leading

What is the output torque of this motor? Express the answer both in newton-meters and in pound feet.

  Determine the magnitude p of the forces

The C-shaped steel bar is used as a dynamometer to determine the magnitude P of the forces shown. Knowing that the cross section of the bar is a square of side 40 mm and that the strain on the inner edge was measured and found to be 450 µ, determi..

  Explain why no hole is generated by the electron excitation

a) Explain why no hole is generated by the electron excitation involving a donor impurity atom. (b) Explain why no free electron is generated by the electron excitation involving an acceptor impurity atom.

  Calculate the force opposing the motion of the bus

The electric motor in a street car develops a power output of80 hp at 1200 rpm as the vehicle moves up a hill at a speed of 30mph. Assume the gearing losses are negligible, calculate: (a) The torque developed by the motor.

  What is the probability of a single outcome event

A jar contains one blue balls, two red balls, and three green balls. Consider the following experiment We pick on ball randomly from the jar, record the color, and put it back. We then pick a ball randomly for one more time and record the color.

  Make a project risk register

Make a project risk register: - You are planning to install a turnstile at the entrance to the student centre at Kabianga University.

  Find the slopes and the interceptions at the voltage axis

An abrupt p-n junction has a doping concentration of 1015, 1016, or 1017 cm-3 on the lightly doped n-side and of 1019 cm-3 on the heavily doped p-side. Obtain series of curves of 1/C2 versus V, where V ranges from -4 to 0V in steps of 0.5V.

  As a project manager on a product development team

As a project manager on a product development team for a new line of iPads for the hearing impaired, you are asked to create a product development plan that addressed items (a) through (f) below. The product has been broken down into the following su..

  Find out how to use the solve function to solve for va

To analyze electric circuits, it is often necessary to solve simultaneous equations. To find the voltages Va, Vb, and Vc at nodes a, b, and c, the equations are 2(Va-Vb) + 5(Va-Vc) - e^(-t) =0 2(Vb-Vc) + 2Vb + 3(Vb-Vc) =0

  What is the probability that both will satisfy specification

A certain application specifies capacitors with resistances between 900 and 1,000 megohms.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd