Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
Design a 3-bit 4:1 MUX using discrete logic gates (draw the circuit diagram). The 4 sources are I0 I1 I2 I3 and the output is Y (note that these are all 3-bit words). Individual bits of I0 are I0(0), I0(1), and I0(2); individual bits of I1 are I1(0), I1(1), and I1(2); and so on. The select signals are s1 s0 (s1 is the msb and s0 is the lsb). Thus, for example, if {s1 s0} = 10, then source I2 is routed to the output Y; if {s1 s0} = 01, then source I1 is routed to the output Y; and so on.
A single phase two winding transformer having rating: 20 KVA,480/120 V, 60 Hz A source connected to the 480 V winding supplies an impedance load connected to 120 V winding. The load absorbs 15 KVA at 0.8 pf lagging when load voltage is118 V.
An electrical energy source forces a constant current of 500(mA) through a light bulb for one hour. If 12.6(kJ) is given off in the form of light and heat energy, calculate the voltage drop across the bulb.Use Engineering Notation with 3 decimal p..
The dimmer knob is adjusted such that it applies voltage to the load during the initial 28 % of each half cycle of the standard 120V/60 Hz AC voltage. Find the real (average) power dissipated on the load in watts.
An asset with a first cost of $50,000 is depreciated by the MACRS method over a 10-year period. If the asset will have a $20,000 salvage value, its book value at the end of year two will be closest to
(a) Implement a 4-bit ripple carry adder, (b) a 4-bit carry lookahead adder, (c) compare the cost of these two implementations, and (d) compare the processing speed of these two implementations.
1) Ohm's. Law is considered one of the key foundation in electronics . Why (2) Why do we have to build and test circuits when we have simulation tools
an N-type silicon substrate with doping density of 1015 cm-3 Arsenic is to be converted in tp p-type by Boron diffusion so the resistivity at T=75C is 5Ω-cm all atoms are fully ionized
Write a matlab code to direct a Regular polygon to move forward, right down, left and turn base on the degree of the angle.
1-If the AB current in a Y-connected load has an angle of -14°, what is the angle of the a-phase current. (0 decimals in degrees) 2-If the current of the a-phase in a Y-connected load has an angle of -73°
A. For a particular MOSFET operating in the saturation region at a constant vGS, iD is found to be 1.4 mA for vDS = 0.1 V and 3 mA for vDS = 4.0 V. What is the value of VA (in V) B. For a particular MOSFET operating in the saturation region at a co..
What is the total power density and total available current density between wavelength of 280 and 1240 nm for the AM0 and AM1.5 spectra. Assume each photon generates on electron-hole pair. You will need AM1.5 and AM1.0 spectra.
Hockey puck B rests on a smooth ice surface and is struck by a second puck A, which has the same mass. Puck A is initially traveling at 14.6 and is deflected 28.0 from its initial direction. Assume that the collision is perfectly elastic.
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd