Describe with the aid of diagrams explaining why and when

Reference no: EM13529983

a)Describe the growth of the boundary layer for flow over a flat plate. include in your description explanation of the laminar boundary layer, the turbulent and the laminar sub layer.

b) Describe with the aid of diagrams explaining why and when boundary layer separation occurs. c)Describe some methods to prevent boundary layer separation

Reference no: EM13529983

Questions Cloud

How the strains deform the element within the x-y plane : Use the strain-transformation equations to determine (a) the in-plane principle strains and (b) the maximum in-plane shear strain and average normal strain.

Determine the required diameter of the shaft : The pulleys attached to the shaft are loaded as shown. If the bearings at A and B exert only horizontal and vertical forces on the shaft, determine the required diameter of the shaft to the nearest 1/8 in. using the maximum-shear-stress theory of fa..

Determine the greatest weight of the machine that the beam : The beam has a flange width b=8 in. If the maximum bending stress is not to exceed σallow=22 ksi, determine thegreatest weight of the machine that the beam can support. The center of gravity for the machine is at G, and the supports at Band C are smo..

Determine the maximum allowable uniform load what : A W410 X 0.83 steel section is used in a10 m simple span. Determine the maximum allowable uniform load what the beam can carry if the allowable flexural stress is 165MPa, the allowable shear stress is 100 MPa, and the allowable deflection is 1/360 of..

Describe with the aid of diagrams explaining why and when : Describe with the aid of diagrams explaining why and when boundary layer separation occurs. c)Describe some methods to prevent boundary layer separation

Convert a stress of 4500 newtons per square millimeter : Convert a stress of 4500 Newtons per square millimeter to kipsper square foot. Use complete and utterly perfect unit analysismethods. Do one one calculation line.

Why fine pearlite is harder and stronger than coarse : Briefly describe the simplest heat treatment procedure thatwould be used in converting a 0.76 wt% C steel from onemicrostructure to the other, as follows:

How wouldyou accomplish this task : Suppose you arethe operations manager of a manufacturingconcern. You are directedto expand the capacity of your plant owing to increasing demand. How wouldyou accomplish this task?

Draw the er diagram above scenario by illustrating the : Consider the following requirements for an airline ticketsbooking system. The system is composed of manyairlines. Each airline is identified by a code, name and headquarter’s address. An airline has different mileprograms, identified by a type- code,..

User Account

All Pages