Describe mathematically and explain the principle of angular

Assignment Help Civil Engineering
Reference no: EM13563645

a.) Describe mathematically and explain the Principle of Linear Impulse and Momentum ? What is Conservation of Linear Momentum and how is it related?

b.) Describe mathematically and explain the Principle of Angular Impulse and Momentum ? What is Conservation of Angular Momentum and how is it related?

c.) What is the difference between Linear Momentum and Angular Momentum?

Reference no: EM13563645

Questions Cloud

What is final velocity of originally stopped car : Car is traveling at constantspped, passes a car stopped, it accelerates at 7m/s2 , what is final velocity of originally stopped car
What must be the rated horsepower of the motor : An automobile has been designed to maintain a constant speed of 55 mph on a +5% grade. The weight of the vehicle when fully loaded is 6000 lbs. What is the total resistance in still air of this vehicle?
Determine what is the radius of the circular arc : A 50-kg pilot comes out of a vertical dive in a circular arcsuch that at the bottom of the arc her upward acceleration is 8.5g. what is the radius of the circular arc
Calculate the natural rate of groundwater discharge through : Given a potentiometric surface with a regional slope of 7m/km, calculate the natural rate of groundwater discharge through a confined aquifer with transmissivity (hydraulic conductivity times aquifer thickness) of 0.002 m2/s.
Describe mathematically and explain the principle of angular : Describe mathematically and explain the Principle of Angular Impulse and Momentum ? What is Conservation of Angular Momentum and how is it related?
What is the normal force exerted on the skate boarder : A skateboard track has the form of a circular arc with a 3.60m radius, What is the normal force exerted on the skate boarder at the bottom of the circular arc
You are a construction engineer working on a large concrete : You are a construction engineer working on a large concrete foundation project, involving the placement of over 500,000 c.y of concrete. The construction site is adjacent to a salt-water source (bay) & it is decided to set up a concrete batch plant o..
What is the work doen by kinetic friction : A 28.0 kg seal at an amusement park slides down a ramp intothe pool below. What is the work doen by kinetic friction
Determine the maximum rubbing velocity : A Slider-crank mechanism has acrank to connecting link ratio of ¼. determine the maximum rubbing velocity at the bearing when thecrank rotates at 3800 rev/min

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculate the critical depth of a circular concrete pipe

calculate the critical depth of a circular concrete pipe with a diameter of 42 inches, a Manning's Number of .014, a slope of .025% and a flow rate of 10 CFS (cubic feet per second). The radius is 3.55 and normal depth is 25 inches

  Determine heat removed in the cooling process in kj per min

atmospheric air at 1.01 bar 30 c and 60 percent relative humidity flows over a set of cooling coils at an inlet flow rate of 1500 m^3/min the liquid which condeness is removed from the system at 17 c

  Determine bulk density and the degree of saturation

A cylindrical sample of soil 39 mm in diameter and 77 mm long weighed 180 g. The sample is not fully saturated and its moisture content was found to be 27.0%. Assume rS = 2.70 Mg/m3. Determine: a. the bulk density, r b. the dry density, rd c. the d..

  Evaluate the pressure head at point

Evaluate the pressure head at point a and determine the vertical effective stress at point b and evaluate the lateral pressurein the brown clay

  What flowrate can be expectedthrough the line

An 18 in. newriveted steel pipe 1000 ft long runs from elevation 150 ft toelevation 200 ft. If the pressure at elevation 150 ft is 100 psiand at elevation 200 ft is 72 psi, what flowrate can be expectedthrough the line? (use e = 0.003 ft)

  How many pounds of bod are destroyed by the plant each day

A wastewater treatment plant produces 34, 500 pounds of secondary sludge each day. Wastewater flows into the plant at a rate of 5.6 MGD and has an influent BOD of 325 mg/L. How many pounds of BOD are destroyed by this plant each day

  Determine the lengths and bearings of sides of polygon

Determine the lengths and bearings of the sides of a closed polygon traverse whose corners have the following x and y coordinates: A(5000.00, 5000.00) B(5289.67, 5436.12) C(4884.96, 5354.54) D(4756.66, 5068.37)

  Determine hydraulic conductivity of the aquifer in vicinty

The rate of water level change was measured when the water in the auger hole was 5 meters below the water table, and was determined to be 5 cm/s. Determine the hydraulic conductivity of the aquifer in the vicinity of the auger hole.

  Which truck will cause more pavement damage

a 6 inch soil cement base and an 8 inch crushed stone subbase, which truck will cause more pavement damage?(assume drainage coefficients are 1.0)

  Calculate the height of water in the standpipe after 4 hours

A falling-head permeability test is being conducted on a saturated sample of clayey silt having hydraulic conductivity of 6.5 x 10-9 m/s. The diameter and the length of the sample are 100 mm and 150 mm.

  Determine the distributed loading that acts along the purlin

If the purlins are spaced 4 ft and the bents are spaced 25 ft apart, determine the distributed loading that acts along the purlin DF and the loadings that act on the bent at A,B,C,D, and E.

  Determine the density and pressure in cgs absolute units

A certain gas has a molecular mass of 40. It is under a pressure of 2.5atm and a temperatature of 25 Degree Celsius. Determine its density and pressure in CGS absolute units.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd