Derive the backpropagation algorithm for this networ

Assignment Help Civil Engineering
Reference no: EM131343902

In Figure P11.10 we have a network that is a slight modification to the standard two-layer feedforward network. It has a connection from the input directly to the second layer. Derive the backpropagation algorithm for this network.

1401_f7e6cff2-6a50-400d-a306-e87235e6ea14.png

Reference no: EM131343902

Questions Cloud

Recognise the scope of applications of fea : Project objectives - Recognise the scope of applications of FEA and Know how to use commercial FEA software to solve engineering problems through analysis
Precipitation of silver iodide : Why does the temperature of a solution increase if the reaction is exothermic? For example, in the precipitation of silver iodide, delta H is -110.7 kj. Why is this reaction exothermic and why does it cause the solution temperature to increase?
Standard heat of vaporization : Mercury (Hg) has a normal boiling point of 356.7 °C, and a standard heat of vaporization of 59.11 kJ/mol. Determine what mass of mercury will vaporize in a closed container at 22°Cif it has a volume of 1.7 L of space above the liquid.
Describe the health policy development process : Describe the health policy development process and the roles that various stakeholders have in that process associated with the article.Include a brief description of the key health policy issues, and evaluate the potential of these issues to tra..
Derive the backpropagation algorithm for this networ : In Figure P11.10 we have a network that is a slight modification to the standard two-layer feedforward network. It has a connection from the input directly to the second layer. Derive the backpropagation algorithm for this network.
Resulting from the addition : Calculate final pH resulting from the addition of 5.0 mmol of strong acid to the buffer solution made from 0.150 L of 0.50 M NH4Cl and 0.100 L of 0.25 M NaOH. pKa(NH4+)=9.25.
Vapor pressure of water : A 0.025 g sample of H2O is injected into a 1.00 L flask at 30.0 °C. What forms of water will be present at equilibrium? Vapor pressure of water at 30.0 °C is 31.8 mm Hg.
Partial pressure of the nitrogen : A sealed container holds 1.00 mole of helium and 2.00 moles of nitrogen at 30.0°C. When the total pressure of the mixture is 666 mm Hg, what is the partial pressure of the nitrogen in mm Hg? Provide an answer correct to 2 significant figures.
Calculate the molarity of solution : Dr. Pepper has 40.0g of sugar per 12 oz. of liquid. Calculate the molarity of this solution. Put that molarity into your regression line and calculate the density (all other things being equal) of this sugar solution. Show your work

Reviews

Write a Review

Civil Engineering Questions & Answers

  Is the reported peak deviatoric stress reasonable

A one-dimensional consolidation test gave the following results: Cc = 0.32, Cr = 0.06, and OCR = 6. In the field, the groundwater level is at the ground surface.

  Determine the flow of vehicles on the level section

rom a photograph one observes that on a level section of highway 10% of the vehicles are trucks, 90% are cars, and that there are 50 vehicles per mile of highway. The trucks travel at 40 mph, and the cars at 50 mph.

  Determine a flow graph for the corresponding inverse filter

By tracing the path of an impulse through the flowgraph, determine y[1] for input x[n] = δ[n].

  Calculate the final length and final diameter of specuman

A cylinder with a 6.0 in., diameter 12.0 in. height is put under a compresive load of 150 kips. The modulus of elasticity for this specimen is 8000 ksi and Poisson's ratio is 0.35. calculate the final length and the final diameter of this specuman..

  What volume of cmfr would be required to remove

The CMFT has a 4000 gallon volume. What wastewater flowrate can be treated in this CMFR in order to remove 98% of the BOD5

  Determine the maximum allowable temperature rise

Determine the maximum allowable temperature rise if the allowablecompressive stress in the copper is σ(allowable) = 19,500 psi.

  Estimate liquid volume of an aeration tank required to treat

Estimate the liquid volume of an aeration tank (units of m^-3) required to treat the following wastewater to a BOD effluent standard of 30.0 mg L^-1 and a suspended solids effluent standard of 30 mg L^-1.

  Use matlab to determine how many days the price of stock a

Use MATLAB to determine how many days the price of stock A was above both the price of stock B and the price of stock C.

  Determine the principal stress developed at a point

The hollow circular shaft is subjected to the torque of 4 kN # m. Determine the principal stress developed at a point on the surface of the shaft.

  Develop a set of guidelines to shape the future development

MMK222309 Sustainable Design and Construction - Contrasting the three Eco-towns identify the key lessons which relate to their location, scale of development, sustainability principles applied, and the commercial viability of the different models.

  Compute the magnitude of the support reaction at a

The homogeneous 240-lb bar AB is in equilibrium in the position shown. Determine the distance b that locates the 165-lb force and compute the magnitude of the support reaction at A.

  Determine what horsepower must be supplied to the pump

A pump of 80% efficiency lifts water from one large open tank to another; the difference in water surface elevations is 20 feet. The pipe is relatively smooth (f = 0.0122), and has 3 elbows, each with a loss coefficient of 2/3.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd