Derive an expression for velocity of a jet of viscous liquid

Assignment Help Civil Engineering
Reference no: EM13317122

Using pie method, derive an expression for the velocity of a jet of viscous liquid issuing from an ori ce under static head if this velocity depends only on head, ori ce diameter, acceleration due to gravity, viscosity and density of fluid. Also clearly list the chosen repeating variables and their dimensions.

Reference no: EM13317122

Questions Cloud

What is the energy of the first excited state : Consider a three dimensional rectangular infinite potential well with sides of length L, 2L and 3L. What is the energy of the first excited state relative to the energy of the ground state
Compute the energy loss in a 90 degree bend in a steel tube : Compute the energy loss in a 90 degree bend in a steel tube used for a fluid power system. The tube has a 0.5 inch outside diameter and a wall thickness of 0.065 inches. The mean bend radius is 2.00 in. The flow rate of hydraulic oil is 3.5 gal/mi..
Find the volume of the given solid region bounded : find the volume of the given solid region bounded below by the cone z=sqrt(x^2+y^2) and bounded above by the sphere x^2+y^2+z^2=128. using triple intergrals.
Find what size pipe should be used to be riveted steel : The pressure at the entrance of the system must be at least 75 psi and the demand is 1350 GPM. The pipe material is to be riveted steel and the length of pipe is 5,000 feet. What size pipe should be used
Derive an expression for velocity of a jet of viscous liquid : Using pie method, derive an expression for the velocity of a jet of viscous liquid issuing from an ori ce under static head if this velocity depends only on head, ori ce diameter, acceleration due to gravity, viscosity and density of fluid.
How security can be configured and provide configuration : Describe how the security can be configured, and provide configuration examples (such as screen-shots and configuration files). Marks are based on demonstrating technical detail and understanding, and choice of examples.
Derive an expression for small flow rates over a spillway : Use dimensional analysis with the following parameters: height of spillway (P), head on the spillway (H), viscosity of liquid, density of liquid, surface tension, and acceleration due to gravity.
What frequency is the trombonist producing : You bike at 11.5 m/s directly away from your neighbor\'s trumpet sound and toward the sound of another neighbor\'s trombone, What frequency is the trombonist producing
Estimate what is the critical slope of the channel : A trapezoidal channel cut into rock has a bottom width of 4 ft, side slopes of 1:1 and a channel slope of 0.0005. What is the critical slope of the channel.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine what portion of the tube needs to be reinforced

The copper pipe has an outer diameter of 2.50 in. and an inner diameter of 2.30 in. if the allowable shear stress in the pipe is 2 ksi, what portion of the tube needs to be reinforced

  Explain how to estimate the long-term safety factors

A 2.0m-wide strip at a depth of 1 m in a stiff clay carries a wall load of 425 kN/m. The saturated unit weight of the caly is 20kN/m^3. TRiaixal tests give the following results: c'=10 kPa, phi'=28 degree, cu=105kPa, and phi_u = 0.

  What is the hydrologic risk of occurring in the next 10years

Lake levels have been measured for the past 50 years at Cagles Mill Lake. The highest annual lake levels (in feet, mean sea level) on record are 887.5, 887.3, 886.5, 886.0, 885.9. The other 45 annual peaks are smaller.

  What is the potential theoretical oxygen demand associated

A Waste water has been characterized for nitrogen-containing compounds and the TN was 26 mg N/L, the TKN was 14 mg N/L and nitrate was 27.3 mg NO3-/L. What is the potential theoretical oxygen demand (mg O2/L) associated

  How much money is required in the trust fund to provide

(1) To provide $750000 for th construction and $250000 for the initial equipment of a small engineering laboratory ; (2) to pay the $150000 per year laboratory operating cost; and (3) to pay for $100000 of replacement  equipment every 4 years, beginn..

  What is the maximum accelaration from rest for the car

a newly designed car has a 9.2 ft wheelbase, is rear wheel drive, and has a center of gravity 18 inches above the the road and 4.3 ft behind the front axle. the car weighs 2450 lb, the mechanical effciency of the drivetrain is 90%, and the wheel r..

  How many identical reactors does sony music company require

The plant currently has one CMFR for removal of chromium. How many more identical reactors does the sony music company require to meet the regulatory requirements for chromium discharge of 0.01 mg/L into the Pitman Sewer?

  Calculate temp of interface between steel and isulation

A stainless steel pipe (k= 17 W/m?C) is being used to convey heated oil. The inside surface temperature is 130?C. The pipe is 2 cm thick with an inside diameter of 8 cm. The pipe is insulated with 0.04 m thick insulation

  Determine bulk density and the degree of saturation

A cylindrical sample of soil 39 mm in diameter and 77 mm long weighed 180 g. The sample is not fully saturated and its moisture content was found to be 27.0%. Assume rS = 2.70 Mg/m3. Determine: a. the bulk density, r b. the dry density, rd c. the d..

  Determine which equation is valid in any system units

According to information found in an old hydraulies book, the energy loss per unit weight of fluid flowing through a nozzle connected to a hose can be estimated by the formula h=(0.04 to 0.09)(D/d)^4*V^2/2*g

  Determine the weight w of the container to a ceiling

a container is supported by three cables that are attached to a ceiling. Determine the weight W of the container, knowing that the tension in cable AB is 6 kN

  Determine the irr of building the corrosion-resistant tower

HZ Wireless must rebuild a cell tower recently destroyed by a tornado. A tower made of normal steel (NS) will cost $30,000 to construct and should last 15 years. Maintenance will cost $1000 per year.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd