Define when would wells start interfering with each other

Assignment Help Civil Engineering
Reference no: EM13310107

Two pumping wells 1,000 m away fully penetrate the same confined aquifer. One of the wells pumps at a rate of 1240 m3/ day and the second well pumps at 850 m3/ day. If the aquifer has a transmissivity of 2000 m2/ day and a storage coefficient of 4 x 10^-4, when would the wells start interfering with each other?

Reference no: EM13310107

Questions Cloud

Calculate the rotational inertia of the wheel : A forces of 16.88 N is applied tangentially to a wheel of radius 0.340 m and gives rise to an angular acceleration of 1.20 rad/s^2
Determine water pressure-pressure head and elevation head : For each of the two cases below, determine the water pressure, pressure head, elevation head, and total head at points A, B, and C. Please solve the problem using: (a) the upper reservoir level as the datum
What is the height of the inclined plane : A solid disk of radius 1.60 m and mass 2.3 kg rolls without slipping to the bottom of an inclined plane. what is the height of the inclined plane
Create a summary from the scenario manager : Create a Summary from the Scenario Manager, summarizing Monthly payments, total PaYments, and Interest paid.
Define when would wells start interfering with each other : One of the wells pumps at a rate of 1240 m3/ day and the second well pumps at 850 m3/ day. If the aquifer has a transmissivity of 2000 m2/ day and a storage coefficient of 4 x 10^-4, when would the wells start interfering with each other
Compute the new image distance : An object is initially placed on the optical axis 21.2 cm to the left of a convex lens that has a focal length of 12.1 cm. what is the new image distance
Compitences for central bank of belize : CASE STUDY ON COMPETENCIES  For  Central Bank of Belize
Determine how far from the film should the lens be placed : A camera has a lens with a focal length of 22.2 cm. When an object is placed 3.55 meters away is being photographed
What are the running speed and overall speed of the train : A commuter train has stations spaced 1 mi apart. The top speed of the train is 80 mph. The train accelerates at 5.5ft/sec2 and decelerates at 4.5 ft/sec2. It dwells at the platform for 20 sec to pick up passengers.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Solve for dv by dx and v using differential equations

Consider a simply supported beam with a uniformly distributed load q AND a concentrated load P at midspan. Solve for dv/dx and v using differential equations.

  What percentage of the hexane entering the condenser

A gas stream contains 18.0 mole% hexane and the remainder nitrogen. The stream flows to a condenser, where its temperature is reduced and some of the hexane is liquefied. The hexane mole fraction in the gas stream leaving the condenser is 0.0500.

  Find the minimum flow rate of air

Find the minimum flow rate of air and the heat exchanger second-law efficiency.

  Describe does the sample meet the niosh standard

The National Institute for Occupational Safety and Health (NIOSH) sets standards for CCl4 in air at 12.6 mg/m^3 of air (a time average over 40 hr). The CCl4 found in a sample is 4800 ppb. Does the sample meet the NIOSH standard

  Design a series of closely spaced parallel box beams

Design a series of closely spaced parallel box beams that will support an asphalt road surface over a 10 foot wide, 40 foot long span. The hollow box beams are made of concurred and imbedded No. 8 steel rods (1 inch dia.).

  Horizontal axle passing through center

A 75g , 30cm--long rod hangs vertically on a frictionless, horizontal axle passing through its center. A 12g ball of clay traveling horizontally at 2.5m/s hits and sticks to the very bottom tip of the rod.

  What the meaning of steady state

could you please help me to figure out what the meaning of steady state in the pavement management system preservation and rehabilitation.

  Simple curve having central angle problem

A simple curve has a central angle of 42 degreess. A point Y is located 24m from the vertex and has a perpendicular distance of 3.00m from the back tangent.

  Find the resultant force from all fluids acting on the gate

a tank is filled with oil (specific gravity 0.8) and water to a depth of 10 meter and 6 meter respectively. Find the resultant force from all fluids acting on the gate of 1.8 meter by 9 meter.

  What height difference is needed to generate the flow

A siphone generates a flow of 1 ft/sec thru a 1 inch OD, 3/4 ID hose. A) What height difference is needed to generate this flow B) What height for 10 ft/sec C) What for 100 ft/sec

  Estimate probability of observer counting exactly 4-vechile

an observer has determined that the time headways between successive vechile on a section of the highway are exponentially distributed and that 65% of the headways btw vehicles are 9 seconds or greater.

  How far should a centerline extend past an object

1. What does the acronym ANSI stand for Stands for American National Standards Institute 2. What is the purpose of a titleblock The purpose of a title block is for give us enough information about the project.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd