Create a depreciation schedule showing annual depreciation

Assignment Help Civil Engineering
Reference no: EM13548071

1.A 20g mass vibrates accordings to the equation x=0.0009cis(3pit/2 + pi/2). Find the amplitude, period, max velocity, max acceleration, spring constant "K", and the total energy of the system? 

2.Create a depreciation schedule showing annual depreciation amounts and end-of-year book values for a $26,000 asset with a 5 year service life and a $5000 salvage value, using the MACRS depreciation method.

3.An operator at a wastewater treatment plant decided to increase the SRT from 5 to 10 Days How will this affect:

a)the oxygen requirement?

b) MLVSS in the aeration tank?

c)the effluent BOD or COD?

d) and the sludge generation? Please explain the answers using the kinetic equations for activated sludge process.

Reference no: EM13548071

Questions Cloud

You are asked to design a winch system : You are asked to design a winch system for Santa's sleigh. Assume that Santa weighs 300 lbs, visits 10 houses an hour and requires a 20 foot lift at each house, what is the average power that the system will use if it is perfectly efficient? Express ..
Production managers with over 15 years of experience : A sample of 9 production managers with over 15 years of experience has an average salary of $71,000 and a sample standard deviation of $18,000.
By what factor must the length of the current board be : A diving board of uniform cross-section is designed to deflect 6" under the weight of a 150 pound person standing on the end. With the recent trend towards obesity
State the null hypothesis and the alternative hypothesis : 1. State the Null Hypothesis and the Alternative Hypothesis
Create a depreciation schedule showing annual depreciation : Create a depreciation schedule showing annual depreciation amounts and end-of-year book values for a $26,000 asset with a 5 year service life and a $5000 salvage value, using the MACRS depreciation method.
Determine which variable is the dependent variable : Determine which variable is the dependent variable.
Why might a t test not be very useful in case : Why might a t test not be very useful in this case?
Statistical inference procedure should we use : Which of the following statistical inference procedure should we use?
Computing cash from operations : Computing Cash from Operations - Brinkerhoff provides the following income statement information for 2008

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is the range of water contents of the in-situ soil that

The specifications for a project specify that the in-situ soil must be compacted to 98% of its maximum Modified Proctor Density. What is the range of water contents of the in-situ soil that will meet this criteria?

  Plot the drawdown after 4 hours as function of position

a confined aquifer with a transmissivity of 7.0x10^-3 m^2/s and a storativity of 5.0x10^-4 is pumped by two wells 35 m apart. One well is pumped at 7.6 L/s and the other at 15.2 L/s.

  Determine what is the flexural strength of the rod

A 3-point bending test is performed on a 10 mm diameter rod of Silicon Carbide. The distance between the supports is one foot. If the load at fracture is 10,000N, what is the flexural strength of the rod

  How to determine the friction force on the floor

The crate has a wieght of W = 350lb., and the coefficients of static and kinetic friction are us = 0.3 and uk = 0, respectively. Determine the friction force on the floor. Theta = 45 degrees and P = 100lb.

  Calculate the depreciation expense of the equipment

At the end of year 1 the piece of equipment is worth $15,000 and at the end of year 2 $13,000, and at the end of the third and final year the salvage value is equal to $9,000.Applying the straight line depreciation, calculate the depreciation expe..

  Estimate average shear stress on pipe and friction factor

Water is flowing in a horizontal 200-mm diameter pipe at a rate of 0.05 m^3/s, and the pressures at sections 80 m apart are equal to 500 kPa at the upstream section and 400 kPa at the downstream section.

  Calculate the detention time in hours horizontal velocity

Two rectangular clarifiers(sedimentation basins), each 30 ft long, 15 ft wide, and 10ft deep, settle a combinedtotal of 0.40 mgd following alum coagulation. The effluent channelshave a total weir length of 60ft in each basin

  Compute required weight of coarse aggregate per cubic yard

A concrete mix with a 3 inch slump, w/c ratio of 0.50, and sand with a fineness modulus of 2.4 contains 1.700 lb/yd^3 of coarse aggregate. Compute the required weight of coarse aggregate per cubic yard.

  Determine the total dead load-per foot of length

Three-ply asphalt felt and gravel roof over 2in of insulation board is supported by 18in deep precast reinforced concrete beams with 3ft wide flanges. If insulation weights 3lb/ft 2 and the asphalt roofing weights 5.5lb/ft2, determine the total dea..

  How long did take for the rocket to reach that max height

At that time, there is no more fuel in the rocket engine and the rocket continues upwards in free fall (g=0 ft/sec/sec). (a) How high will the rocket reach before it begins to fall back to the campus

  Commercial management in civil engineering 1-critically

commercial management in civil engineering 1-critically analyse the use of project related commercial risk registers

  A vertical curve is formed when a rural highway passes

a vertical curve is formed when a rural highway passes under a bridge joining a -8 grade to the horizontal grade

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd