Constrained optimization-decision analysis and bayes rule

Assignment Help Basic Statistics
Reference no: EM13853771

Question 1. Constrained Optimization

A company produces and sells four grades of industrial solvents - A, B, C, and D.The selling price per gallon of each grade of solventis $6.40, $5.00, $4.20, and $3.50 respectively.

Because of demand limitations, the company can sell at most

100,000 gallons of solvent A;

300,000 gallons of solvent B;

360,000 gallons of solvent C; and

220,000gallons of solvent D. 

The solvents are produced by blending two types of liquid ingredients:

Ingredient1 and

Ingredient2

The cost price per gallon for the ingredients are

$3.20 for Ingredient1

$2.40 for Ingredient2.

At most 400,000 gallons of Ingredient1 and 600,000 gallons of Ingredient2 are available.

Regulations require a minimum percentage by volume of Ingredient1 in each grade of solvent:

60% for A,

50% for B,

40% for C,

10% for D.

For your convenience, the information presented above is summarized in the tables below:

Solvent grade

A

B

C

D

Selling price per gallon

 $   6.40

 $  5.00

 $  4.20

 $  3.50

Maximum quantity allowed (gallons)

100,000

300,000

360,000

220,000

Minimum % of Ingredient1 required

60%

50%

40%

10%

 

Availability (gallons)

Price per gallon

Ingredient1

400,000

 $   3.20

Ingredient2

600,000

 $  2.40

The company must determine an optimal production plan so as to maximize their profits subject to the applicable constraints. 

(a) Formulate the problem as a linear program

Define the decision variables: 

Specify the objective function:

Specify the constraints:

(b) Solve the linear program and report your optimal solutions

i. What is the maximum profit attainable under an optimal plan?

Maximum Profit = 

$

ii. How many gallons of each ingredient should be used to produce each grade of solvent under this optimal plan?

Quantity (in gallons)

A

B

C

D

Ingredient1

 

 

 

 

Ingredient2

 

 

 

 

iii. How many gallons of each ingredientis used up under this optimal plan?

Quantity (in gallons)

Used

Available

Ingredient1

 

400,000

Ingredient2

 

600,000

(c) At most how much should the company be willing to pay per gallon for additional quantities of the ingredients? Justify your answer.

The maximum amount that the company should be willing to pay for each additional gallon:

Ingredient1:

$

per gallon.

Ingredient2:

$

per gallon.

Reasoning:

 

Question 2: Decision Analysis and Bayes Rule

Two trained classifiers - A and B - are available to classify tissue samples as benign or malignant. Each classifier is prone to two types of errors. The table below summarizes the probability of these errors:

Classifiers

False Positive Error Probability

False Negative Error Probability

A

0.06

0.01

B

0.04

0.02

  • False Positive error probability is defined as the conditional probability of classifying ahealthy tissue sample as malignant.
  • False Negative error probability is defined as the conditional probability of classifying an infected tissue sample as benign.

Historical data suggests that 10 percent of the tissue samples are infected.

a. Based on the information specified above, what is the conditional probability that:

(i) A tissue sample classified as benignbyclassifierB is actually infected?

(ii) A tissue sample classified as malignantbyclassifierA is actually healthy?

b. If the cost of classifying an infected tissue sample as benign is 100 times the cost of classifying a healthy tissue as malignant, which classifier should a risk neutral rational decision maker use? Why?

c. We assumed that 10% of the tissue samples are infected. At least how low should the percentage of infected tissues be for a risk neutral rational decision maker to prefer classifierB? Assume that all other parameters remain as specified in (a) and (b).

d. We assumed that the ratio of the cost of classifying an infected tissue sample as benign to the cost of classifying a healthy tissue as malignant is 100. At least how low must this ratio be for a risk neutral rational decision maker to prefer classifierB? Assume that all other parameters remain as specified in (a) and (b).

Reference no: EM13853771

Questions Cloud

Specification calls for an acceptable diameter : Problem: Bearings are manufactured at a rate of 1000 bearings per day. For a large of bearings, their diameter was normally distributed with a mean of µ = 2.505 in and standard deviation of σ = 0.008 in. The specification calls for an acceptable d..
Differentiate between strategic management and thinking : Differentiate between strategic management, strategic thinking
Show the total carrying amount by asset category : Show the total carrying amount (as at 30/06/2013, 30/06/2014 and 30/06/2015) by asset category, with filter on to enable the selection of location.
Discuss the role of special purpose entities : Discuss the role of Special Purpose Entities (SPEs) in the fall of Enron
Constrained optimization-decision analysis and bayes rule : A company produces and sells four grades of industrial solvents - A, B, C, and D.The selling price per gallon of each grade of solventis $6.40, $5.00, $4.20, and $3.50 respectively.
How to pick right virtual technology for the virtual tour : The business problem to be solved is how to pick the right virtual technology for the virtual tour, keep the IT cost down, and give more control of the Inn's web presence (Laudon, 2011).
Discuss the ratios and what information can be provided : Choose three ratios from the liquidity, profitability, leverage, operating efficiency, and market measures category (figure 5.1, p. 213) in the "Understanding Financial Statements text. Discuss the ratios and what information can be provided by ea..
Minimum sample size n needed to estimate : 1. Find the minimum sample size n needed to estimate µ for the given values of c, s, and E.
Marketing plan for beauty by leilani : Complete Marketing Plan should include all sections listed in the marketing plan outline.

Reviews

Write a Review

Basic Statistics Questions & Answers

  Detla airlines quotes a flight time of 2 hours 5 minutes

detla airlines quotes a flight time of 2 hours 5 minutes for its flights from cincinnati to tampa. suppose we believe

  If 20 of the residents in a us city prefer a white

if 20 of the residents in a u.s. city prefer a white telephone over any other color available what is the probability

  Claim of the brewery regarding the mean volume

Test the claim of the brewery about the mean volume equal to 32 oz. at the 0.05 significance level. It's your choice whether to use z or t.

  Given that z is a standard normal variable pz gt -161 is if

1. given that z is a standard normal variable pz gt -1.61 is ?2. if x has a normal distribution with mean 100 and

  Suppose that the horses are evenly matched so that all

suppose you and a friend are betting on a horse race involving four horses. you can win money in one of the following

  Describe hyper-geometric distribution

What is the probability that two of absent students were girls.What is the probability that two of absent students were boys.

  Identify appropriate method of data collection

A survey of the residents of a new subdivision on why they happened to select that area in which to live. You also wish to secure some information about what they like and do not like about life in the subdivision.

  Calculate the battery failure probability under normal

a particulate monitor has a power supply consisting of two batteries in parallel. either battery is adequate to operate

  What is the probability that a hotel room costs between 200

new york city is the most expensive city in the united states for lodging. the mean hotel room rate is 204 per night

  Break even point-hamburger

Hamburger Joe's sells the best burgers in town. The variable unit cost for making one burger is $.97. The fixed cost of making burgers for 12 months will be a total of: $140,000.

  The mean diameter of a ball bearing produced by a certain

the mean diameter of a ball bearing produced by a certain manufacturer is 0.80 cm with a standard deviation of 0.03 cm.

  When looking at a set of data we often want to be able to

when looking at a set of data we often want to be able to describe it. what two elements are we interested in

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd