Consider a micro channel with a constant voltage

Assignment Help Mechanical Engineering
Reference no: EM13704642

An important application of micro fluidics is in the area of electro kinetic separations, in which an electric field is applied along the length of a micro channel to generate differential velocities for various components (molecules, nanoparticles, cells, etc.) within the channel. As we will see when discussing micro fluidic separations, the electro kinetic particle velocity is given by u = µE where u is the velocity (units of m/s), µ is the electro kinetic mobility (a constant associated with the particle, with units of V/s) and E is the electric field (units of V/m).

a. Consider a micro channel with a constant voltage difference applied between the inlet and outlet ports. How does the time required for a particle to traverse the length of the channel (t) vary with the generalized size scale of the channel (L) when all dimensions are uniformly reduced by the same factor?

b. What is the scaling relationship if the system is operated with constant electric field (instead of constant voltage)?

c. How do the scaling relationships in (a) and (b) change if only the channel length is reduced, while keeping width and height constant?

d. In practice, Joule heating during electro kinetic separations limits the electric field that can be applied to some maximum value. If heat removal from the channel scales linearly with channel surface area, what is the scaling relationship between generalized size scale (L) and separation time when the separation is operated at maximum (not constant) electric field?

Reference no: EM13704642

Questions Cloud

Tasty morsels chocolate company tracks amount of chocolate : The 'Tasty Morsels Chocolate Company' tracks the amount of chocolate found in its chocolate bars. The target is 26 grams and the upper and lower specifications are 29 and 23 grams, respectively. If their most recent X bar has a centerline of 25 and t..
What is the effect of the water temperature : A pump is used to raise the pressure of water from 0 psig to 55 psia. How much power (in kW) will be required to pump 1.5ft3/s of water? What is the effect of the water temperature on the pump power that is required?
Significant mass and energy flows into an out of the room : On a hot summer day, a student turns his fan on when he leaves his dorm room in the morning. The dorm is well insulated but not air conditioned, and all of the doors and windows are closed. Draw a simple picture of this room after the student leaves ..
Pump is used to raise the pressure of water : A pump is used to raise the pressure of water from 0 psig to 55 psia. How much power (in kW) will be required to pump 1.5ft3 /s of water? What is the effect of the water temperature on the pump power that is required?
Consider a micro channel with a constant voltage : An important application of micro fluidics is in the area of electro kinetic separations, in which an electric field is applied along the length of a micro channel to generate differential velocities for various components (molecules, nanoparticles, ..
Propose a reasonable synthesis of alcohol : Propose a reasonable mechanism for the reaction - Propose a reasonable synthesis of alcohol and discuss the reaction in terms of the ease of each successive step and sketch the dominant product or products of the overall reaction
Cold cranking amperes of conventional lead-acid automobile : The cold cranking amperes (CCA) of a conventional lead-acid automobile battery is the amount of current the battery can provide at 0°F for 30 seconds and maintain at least 1.2 volts per cell (or 7.2 volts for a standard 12-volt battery).
What is the value of re for the smaller channel : The Reynolds number for a particular micro channel flow is found to be Re = 2. If all channel dimensions (length, width, and height) are reduced by a factor of 10, and the time required for a particle to traverse the length of the channel is invarian..
What is the line in the new coordinate system : A line is represented by two end points (-1,0,0) and (2,0,0). The coordinate system is rotated 90 degrees about the y axis and then the orgin is moved to (2,2,2). What is the line in the new coordinate system? I need help on using this with homogeneo..

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  If the elevation points a and b relative to the elevation

a contractor is required to prepare a soil surface so that its planar and the normal direction to the surface is within

  A vapor in a cylinder is compressed frictionlessly from 20

a vapor in a cylinder is compressed frictionlessly from 20 to 60 psia in such a manner that pvconstant. the initial

  Determine the mass of the water and the magnitude and

the piston-cylinder assembly shown in the figure is fitted with a linear spring. the spring constant is k 15 knm and

  The temperature at the center plane of the material is 62oc

a certain material 2.5 cm thick with a cross-sectional area of 0.1 m2 has one side maintained at 35oc and the other at

  Calculate the maximum mass flow rate at the inlet condition

a refrigerant 134a at 140 kpa and -10 degree celcius is compressed by an adiabatic 16kw compressor to an exit state of

  Carbon annealed steel rod has a rectangular cross section

The company has been asked to assess the effects of a variety of engineering conditions on a selection of components, perform calculations for the components that follow. A medium carbon annealed steel rod has a rectangular cross section and must cop..

  Determine the initial state and the end state of the gas

an un-stretched spring initially is attached to a horizontal piston round shape. heat is added to the gas until the

  Find the velocity u2 in the inviscid central core at the

air flows in a horizontal cylindrical duct of diameter d 100 mm. at a section a few meters from the entrance the

  A piston-cylinder filled with air receives

A piston-cylinder filled with air receives 10 kJ of heat and expands, doing 5 kJ of work. What is the change in internal energy of the air?

  The allowable shearing stress is 15ksi in a steel rod ab

the allowable shearing stress is 15ksi in a steel rod ab and 8ksi in a brass rod bc. knowing that a torque of magnitude

  The ratio of specific heats for the working fluid is ygema

a cycle consists of two isochoric and two isothermal process. the volume variation vmax vmin in the cycle is r fold

  The maximum steam temperature is 550 degrees c and the max

it is proposed to build a 1000mw electric power plant with steam as the working fluid. the condensers are to be cooled

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd