Compute the void ratio and a specific gravity of the soil

Assignment Help Civil Engineering
Reference no: EM13315328

A soil initially has a degree of saturation of 95% and a unit weight of 129 lb/ft3. It is then placed in an oven and dried. After removal from the oven, its unit weight is 109 lb/ft3. Compute the void ratio, porosity, initial moisture content, and a specific gravity of the soil, assuming its volume did not change during the drying process.

Reference no: EM13315328

Questions Cloud

Class at the top of exception class hierarchy : The class at the top of exception class hierarchy. In a java program, package declaration .................... import statements.
Help with a site plan : Help with a site plan - Design on paper to add some other things in it.
Calculate the absolute pressure at the bottom of lake : Calculate the absolute pressure at the bottom of a fresh-water lake at a depth of 30.8 m. Assume the density of the water is 1.00 103 kg/m3 and the air above is at a pressure of 101.3 kPa
Changes in technology affected the recording industry : How have changes in technology affected the recording industry and our understanding of what it means to be a professional musician? How have changes in technology affected our access to recorded music and the control exercised by traditional distrib..
Compute the void ratio and a specific gravity of the soil : After removal from the oven, its unit weight is 109 lb/ft3. Compute the void ratio, porosity, initial moisture content, and a specific gravity of the soil, assuming its volume did not change during the drying process.
Recombination era-electromagnetic-weak force combined : Galaxies are moving apart, with a velocity proportional to the distance between them. The "Recombination Era" is when the electromagnetic and weak force combined into a single force. Time appears symmetric under all forces except the strong force.
Find its translational kinetic energy : A solid bowling ball with a radius of 10.9 cm and a mass of 7.1 kg rolls along a bowling alley at a linear speed of 3.0 m/s. What is its translational kinetic energy
Determine the speed of the hoop : A hoop and a disk, both of 0.86- m radius and 5.0- kg mass, are released from the top of an inclined plane 3.5 m high and 9.0 m long. What is the speed of the hoop
Find the minimum torque that must be applied to second hand : A clock has a second hand whose tip rubs against the inside of the glass cover. what is the minimum torque that must be applied to the second hand

Reviews

Write a Review

Civil Engineering Questions & Answers

  Estimate the land area in acres that must be purchased

The city has a stable population of 235,000 residents and the design criteria for the new landfill are as follows: MSW generation rate = 4.0 lb/(person-day); density of the compacted MSW in the landfill is 775 lb/yd3

  Determine heat removed in the cooling process in kj per min

atmospheric air at 1.01 bar 30 c and 60 percent relative humidity flows over a set of cooling coils at an inlet flow rate of 1500 m^3/min the liquid which condeness is removed from the system at 17 c

  What are the reasons for organisms that have mercury

What is (are) the reason(s) for organisms that have mercury concentrations different than what is predicted to occur just by bioconcentration

  Determine the power input into the heat pump

A heat pump that operates on the ideal vapor compression cycle with refrigerant 134a is used to heat water from 16 to 56 degrees Celsius at a rate of 0.20kg/s. The condensor and evaporator pressures are 1.5 and 0.35 Mpa, respectively.

  Determine the force in chains ac and ad during the lift

the 3.5mg engine is suspended from a 500 kg spreader beam and hoisted by a crane which gives it an acceleration of 4m/s^2 when it has a velocity of 2m/s. determine the force in chains AC and AD during the lift.

  What is the length of a 2 degree increment along meridian

What is the length of a 2 degree increment along a (A) meridian and (B) parallel at 45N and 115W. Assume the radius of Earth is 6370 km.

  Determine the natural frequencies and the natural modes

Consider the rocket on a test stand . The nose of the rocket is fixed. The rocket is of length L, constant EA and constant m, mass per unit length. To investigate longitudinal dynamics, the rocket is modeled using axial elements of equal length.

  Find what is the total force on the roof at collapse

a storage tank has a diameter of 80 ft, a height of 25ft and contains oil to a height of 15ft. the suction pumps, which can handle 15000bbl/d, are started, but the safety valves are clogged and a vacuum is drawn in the tank.

  Plot the shape of water surface from the center to radius

a whirlpool is modeled as the combination of a free and a forced vortex. the maximum velocity in the whirlpool is 10 m/s, and the radius at the juncture of the free and the forced vortex is 10m.

  Use the bernoulli equation

Use the Bernoulli equation to describe how this manometer can be used to measure the flow rate through the meter.

  Determine the required pumping rate of the construction

It is required to dewater a construction site 80 m by 80 m. The bottom of the construction will be 1.5 m below the initial water surface elevation of 90 m. Four pumps are to be used in 0.5-m diameter wells at the four corners of the site.

  Determine probability that at least 7 will ride in carpools

suppose 76% of all commuters ride to work in carpools. if eight workers are randomly selected, find the probability that at least 7 will ride in carpools

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd