Compute the unit weight dry unit weight degree of saturation

Reference no: EM13545628

1.A soil sample weights 27.5 lb and has a volume of 0.220 ft3 (cubic feet), a moisture content of 10.2 % and a specific gravity of solids of 2.65. Compute the unit weight, dry unit weight, degree of saturation, void ratio and porosity.

2.Find the live load capacity, Pl of a beam with f prime c=4 ksi, fy=60 ksi, Wd=self weight, beam width b=18 inches, beam height h=24 inches, effective depth=21 inches, concrete unit weight=150 pcf, steel As=3-#9 bars.

Reference no: EM13545628

Questions Cloud

What is the probability that the probability if the flow : You are provided that a 33-year record of peak annual flow rates was subjected to a frequency analysis. You are interested in the median value. Thus, for part (a), what is the probability that the probability if the flow rate exceeds the median value..

Determine the elongation of the cable elongation : A homogeneus cable of a lenght L and uniform cross section is suspended from one end. A. denoting by p the density (mass per unit volume) of the cable and by e its modulus of elasticity. determine the elongation of the cable

Determine the design load for strength and serviceability : Determine the design load for strength and serviceability limit states (short-term and long term), for a steel beam in a residential building with the following data;

Determine the runoff rate from a two storm system if the : Determine the runoff rate at t = 15.0 hr from a two storm system if the first storm drops 2.0-inches starting at t = 0, and the second storm drops 5.0-incheds starting at t = 12.0 hrs.

Compute the unit weight dry unit weight degree of saturation : Find the live load capacity, Pl of a beam with f prime c=4 ksi, fy=60 ksi, Wd=self weight, beam width b=18 inches, beam height h=24 inches, effective depth=21 inches, concrete unit weight=150 pcf, steel As=3-#9 bars.

Calculate the respective thickness of the soild phase : An investigation of a particular site revealed a 4m thick deposit of peat overlying a deposit of soft clay .A 150 mm diameter by 300 mm long sample taken from the peat deposit was weighed and found to have a total mass of 5036 g and after oven-drying..

Compute the work done by the gas for constant pressure : Two pounds of an ideal gas are contained within a piston-cylinder arrangement. The initial volume and pressure are 1 ft3 and 75 psia respectively. The final volume is 3 ft3.

What is the estimated collection efficiency to improve its : Our ESP is collecting 95% of the particles in our exhaust stream. We are under pressure to improve its performance. It has been suggested that if we were to cool the inlet gas from the present 600°F to 250°F, the performance would improve

Calculate head supplied by the pump draw hgl and egl for : Water from a lower reservoir (water surface elevation) 500 m is pumping to the upper reservoir (water surface elevation 600 m) through a 5000 m long straight pipe with 0.5 m diameter.

User Account

All Pages