Compute the true static height in a glass tube

Assignment Help Civil Engineering
Reference no: EM13320666

Pure water at 50 degrees Fahreneit stands in a glass tube of 0.04-in diameter at a height of 6.78 in. Compute the true static height.

Reference no: EM13320666

Questions Cloud

What is the energy difference between the levels : The anomalous Zeeman effect is studied in an advanced student laboratory. A spectral lamp is filled with the vapor of an unknown atom. What is the energy difference between the levels
Write 2 user-defined functions for water volume to decrease : Using estimates of rainfall, evaporation, and water consumption, the town engineer developed the following model of the water volume in the reservoir as a function of time
What is the minimum diameter mirror on a telescope : What is the minimum diameter mirror on a telescope that would allow you to see details as small as 4.85 km on the moon some 384000 km away
What is the average emf induced in the coil : A closely wound rectangular coil of 95.0 turns has dimensions of 21.0cm by 48.0cm. What is the average emf induced in the coil
Compute the true static height in a glass tube : Pure water at 50 degrees Fahreneit stands in a glass tube of 0.04-in diameter at a height of 6.78 in. Compute the true static height.
Find the force of friction exerted on the puck : A puck slides on a surface for 5.6 m before it stops. If it was moving at a velocity of 15 m/s and has a mass of 1.2 kg, what is the force of friction exerted on the puck
Determine what weight of oxygen was put in the tank : When the ambient air is at 70 degrees Fahreneit, 14.7 psia, and contains 21% oxygen by volume, 4.5 lb of air are pumped into a scuba tank, capacity 0.75 ft^3. What volume of ambient air was compressed
What impulse did he imply on the ball : A tennis player hits a 1.45 kg tennis ball with a racket of mass 2.5 kg. If he hits the ball with a velocity of 7.5 m/s and then stops, what impulse did he imply on the ball
How molecule of starch that you eat enters the blood stream : Explain the challenges and advantages of having internal gills over external gills for gas exchange and explain how increased stress levels can affect hormones which ultimately inhibit the immune system? Include all relevant glands and hormones in ..

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine vertical stress increment due to the strip load

Soil with a unit weight of 19.65 kN/m^3 is loaded on the ground surface by a strip load of 1.5 m wide. The strip load is 365 kN/m of wall length. Determine the vertical stress increment due to the strip load and the total pressure

  Freeway capacity and los

A four-lane freeway (two lanes in each direction) is on mountainous terrain with 11ft lanes, a 5ft right-side shoulder, interchange spacing of one every 10 miles, and a 60mph base free-flow speed.

  At what speed in stillwater will cavitation first occur

A sphere L ft in diameter is moving horizontally at a depth of 12 ft below a water surface where the water temperature is 50°F. v max = 1.5 V0. where V0. is the free stream velocity and occurs at the maximum sphere width.

  What standard deviation would be expected in a distance

A field party is capable of making taping observations with a standard deviation of +,-0.003m per 30m taped length. What standard deviation would be expected in a distance of 120m taped by this party

  Predict aqueous phase equilibrium concentration of phenan

Predict the aqueous phase equilibrium concentration of phenanthrene at 25*C if the values for this compound are Cs = 1.1 mg/L, P^v = 1.6 x 10^-7 atm, KH = 4.0 x 10^-5 atm*m^3/mol, and logKow = 4.52.

  Design a needle-punched nonwoven geotextile for use

The thickness of geonet is 0.2 inch (5 mm). Assume the maximum inflow rate is 0.14 inch/hour. The liquid head over the geomembrane liner is 2 inches. The index properties of the soil placed over the geotextile are as follows

  Determine what was the major principal stress at failure

A consolidated-drained triaxial test on a normally consolidated clay yielded a friction angle of 28°. If the all-round confining pressure during the test was 140 kN/m2, what was the major principal stress at failure.

  Compute the cars stopping distance and time

at s=0 the driver applies the brakes hard enough to cause the car to skid. Assume that the car keeps sliding until it stops, and assume that throughout this process acceleration is a= -7.4556. compute the car's stopping distance and time.

  Calculate the total friction force exerted by the road

A 3220-lb car enters an S-curve at A with a speed of 60 mi/hr with brakes applied to reduce the speed to 45 mi/hr at a uniform rate in a distance of 300 ft measured along the curve from A to B.

  Find how long would the pipe have to be in feet to achieve

The flow in the river is 30ft^3/min and the first-order rate constant for disinfection is 6min^-1. 1)What kind of hydrodynamic model should you use. 2) write the mass balance equation for microorganisms in symbols at steady state. define symbols.

  Find when is the rider going to reach the stopping point

If we apply a breaking system to a skateboard while the speed of the skateboard is 5Milies per hour, the rider average weights is 180bounds while his height is 170 cm. You can assume the distance as it is 50meters.

  Determine soil bearing pressure with settlement limitation

The soil below the footings consists of a medium grain sand (SP) and water is located at a depth of 5 feet below the ground surface. The preliminary structural plan calls for a 10 foot wide footing located at a depth of 5 feet which must support a..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd