Compute the suitable equal tangent vertical curve

Assignment Help Civil Engineering
Reference no: EM13531108

1.A 301 stainless steel wire is suspended vertically from itsend. The wire is 400 ft long, diameter .75 inches, specific weight= 489 lb/ cubic foot.

find:

Tensile stress due to the weight of the wire

Max load supported with elastic behavior

Max load supported before failure

2.Compute the suitable equal tangent vertical curve and fullstation elevations for vertical curve that is require to passesthrough a fixed point.

Grades g1 = -2.5 and g2 = +3.7, VPI station is 1+380 withelevation 5210.75. Fixed elevation 5214.00ft at station1+250.00

Reference no: EM13531108

Questions Cloud

Why is it sometimes necessary to seed the sample : Why is the test run in the dark (or in a black bottle)?
What fractionof the total impact of that years emissions of : Weighting these by their global warming potentials, what fractionof the total impact of that year's emissions of these three gaseswould be caused by each gas over the following time periods?
What percent reduction inprimary energy has resulted from : Aluminum cans in the 1970's were considerably heavier than they arenow. For a 0.355-L (12 oz) aluminum can, with mass 0.0205 kg, andusing a 25 percent recycling rate, find the primary energy requiredto produce the aluminum in one such can.
How many gpm would the fluid coming into the 1.75 flexible : If you hace 80' of flexible hose that is 1.75" ID and a pump that is a 4" and moves fluid at 100gpm, how many gpm would the fluid conimg into the 1.75" flexible hose?
Compute the suitable equal tangent vertical curve : A 301 stainless steel wire is suspended vertically from itsend. The wire is 400 ft long, diameter .75 inches, specific weight= 489 lb/ cubic foot.
Which the trailing vortices move downward under their own : An airplane with a weight of 10,000lb/f is flying at 600ft/s at36,000ft., where the airplane pressure is 3.3 p.s.i.a. and thetemperature is -67 degrees F. The lift coefficient is 0.2. The spanof the wing is 54 ft. Calculate the wing area and minimum ..
Calculations of the complete force analysis : Submit your cost analysis for the materials, along with a scaled drawing of the truss, identifying on the drawing the tensile and compressive force in each member.  Also include your calculations of the complete force analysis.
Determine the equivalent length of pipeand fitting : A pipe contains a fitting with a minor loss coefficient equal to2.5. The pipe length = 300 meters, pipe diameter = 0.1 meters, andfriction factor = 0.018. Determine the equivalent length of pipeand fitting.
Calculate the radius of a palladium atom given that pd has : Calculate the radius of a palladium atom, given that Pd has an FCCcrystal structure, a density of 12.0 g/cm^3 , and an atomic weightof 106.4 g/mol.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Tabulate data to be plotted and show method of computation

Given this 10-yr record of annual precipitation in inches (28,21,33,26,29,27,19,28,18,22), plot a rough precipitation frequency curve. Tabulate the data to be plotted and show the method of computation. (note: the frequency in percent of years is ..

  Consolidated-drained triaxial shear test

A consolidated-drained triaxial shear test on a normally consolidated clay yielded a drained friction angle of 28 degrees. If the confining pressure during the test was 15 psi, what was the major principal stress at failure.

  Determine the smallest standard commercial pipe

For satisfactory operation, the static pressure at the pump inlet must not be lower than -6 m of water gage. Determine the smallest standard commercial pipe that will give the required performance.

  Find the location and magnitude of the resultant force

Find the location and magnitude of the resultant force using the numerical integration and the midpoint rule for the following loading of a plate bounded by x=0-2ft, y=0-2ft and z=0 ft. P(x)=16-x^2-2y^2 (lb/ft^2)

  Unit of measurement and unit of payment

Write the unit of measurement and unit of payment of following items. 1) Earthwork in excavation in foundation. 2) Framwork. 3) Steelwork in trusses. 4) Damp proof course D.P.C. 5) Cement.

  What will be discharge delivered from the upper reservoir

A reservoir at elevation 700 ft will supply a second reservoir at elevation 460 ft. The reservoirs are connected by 1300 ft of 24-in cast-iron pipe and 2000 ft of 20-in cast iron pipe in series. What will be the discharge delivered from the upper ..

  Determine what will current be and what will the power be

suppose we have a 100-volt battery connected with a 100-ohm resistance. The current is then 100/100=1 amp. how much power is produced. if we double the voltage, what will the current be and what will the power be.

  Find a way to make it look more like the graph of g

make an inline function g(x)= x+ cos(x^5). plot it using vectors x= -5:.1:5; and y= g(x);. what is wrong with this graph. find a way to make it look more like the graph of g(x) should turn in both plots.

  Calculate the vertical distance

A 600 ft vertical crest curve crosses a 4 ft diameter pipe at rightangles at station 110+85. The PVI of the vertical curve is station110+00 and elevation 1098.4 ft with an incoming tangent grade of1.2% and an outgoing tangent grade of -1.8%.

  Determine speed of the ball when it hits the bottom of lake

A ball is dropped from a boat so that it strikes the surface of a lake with a speed of 19.5ft/s. While in the water the ball experiences an acceleration of a = 10 - 0.8v, where a and v are expressed in ft/s^2 and ft/s, respectively

  Find the depth of runoff from the land surface in inches

The drainage area upstream of a small dam is 20 acres. On a certainday the pond was 9 feet deep with a surface area of 1.6 acres. That night, a 5.4 inch rainstorm caused a large rise in the pond.

  Determine the time for the log to reach a speed

A truck is hauling a 300-kg log out of a ditch (20 degree incline) using a winch attached to the back of the truck. Knowing the winch applies a constant force of 2500N and the coefficient of kinetic friction between the ground and the log is 0.45

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd