Compute the spectral efficiency of in bits per two dimension

Assignment Help Civil Engineering
Reference no: EM131102270

(Orthogonal signal sets) An orthogonal signal set is a set

1149_bd8f3000-8f1a-4934-934f-b477846d09e6.png

(a) Compute the spectral efficiency of in bits per two dimensions. Compute the average energy Eb per information bit.

(b) Compute the minimum squared distance d2 min between these signal points. Show that every signal has M -1 nearest neighbors.

(c) Let the noise variance be N0/2 per dimension. Describe a ML detector on this set of M signals.

Reference no: EM131102270

Questions Cloud

When you invest your savings in a company : When you invest your savings in a company, what is the difference between the return on your investment and the return of your investment?
Ongoing battle between faith or spirituality and science : There is an ongoing battle between faith or spirituality and science that has been active even before the time of Mary Shelley. What are some of the dilemmas she addresses that are still important today?
Marginal propensity to consume : Assume the marginal propensity to consume (MPC) was only 0.5. How much of that $900 billion went to increased consumption? Where did the rest of the money go?
What is the value of the stock today : The dividend should grow rapidly-at a rate of 50 percent per year-during Years 4 and 5. After Year 5, the company should grow at a constant rate of 8 percent per year. If the required return on the stock is 15 percent, what is the value of the stock ..
Compute the spectral efficiency of in bits per two dimension : Let the noise variance be N0/2 per dimension. Describe a ML detector on this set of M signals.
What do we mean when we say that investors : What do we mean when we say that investors and creditors are interested in a company's "cash flow prospects"?
Population of all u.s. adults without replacement : In a sample of 1000U.S.? adults,188 dine out at a restaurant more than once per week. Two U.S. adults are selected at random from the population of all U.S. adults without replacement
Balance of payments surplus : Explain the fact that balance of payments surplus means excess of central bank credit over the demand for real money balances in the economy.
Compute the center line and control limits : Control charts on andRfor samples of sizen=5 are to be maintained on the tensile strength in pounds of a yarn. To start the charts, 30 samples were selected, and the mean and range of each computed. This yields

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine what is the minimum do in the river

A stream is in equilibrium with atmospheric oxygen upstream of a waste outfall. The waste outfall creates a BODo of 20 mg/L in the stream. The k(BOD) is 0.4 /day and the k(o2) is 1.4 / day. The stream temperature is 15 degrees Celsius.

  Determine themax value of bending stress in the beam

A beam of rectangular cross section 300mm by 100mm sitsupright and has a moment of inertia of 225 X 10-6m4 and a max bending moment of 67.5KNm. Determine themax value of bending stress in the beam.

  What is the overall product water recovery and salt

A city is considering a 3 stage membrane system to treat brackish groundwater at its water treatment plant, WTP (Qf=1000m^3/d, Cf=2000mg/L TDS). Each stage can perform 60 % water recovery (Qp/Cf) and 90% salt rejection (1-Cp/Cf)

  Determine what is the largest allowable magnitude of f2

A square with the dimensions of .02m by .02m by .5m is attatched to a solid surface. If the forces on the rod are too large, it will either crush or be sheared off where it is atatched to the solid surface.

  Determine the terminal velocity of the block of cube

A fluid film 0.1 mm thick separates solid and surface. The fluid viscosity is 0.04 N*sec/m^2. Assuming the velocity distribution in the film is linear, find the terminal velocity of the block. The area of the cube in contact with the film is 0.25 ..

  What will the volume of the sample be at the water content

A saturated 100 cm^3 clay sample has a natural water content of30%. It's found that the shrinkage limit occurs when the water content is 19%. If the specific gravity of soil solids is 2.7,

  What is the flow rate of air that must be entering the hood

We have a situation where hydrogen gas at 300 degrees C is flowing out of a tube at the rate of 100 mL/min. The tube is located in a fume hood operating at 25 degrees C and 1 atm.

  Determine the controlling ct factor at the water temperature

A small city is evaluating disinfection requirements for their drinking water plant. With an average flow of 5 MGD and a peak flow of 9 MGD, determine the controlling CT factor (virus or giardia) when the water temperature is 23 degrees C.

  Find excess solids production of extended aeration process

Estimate teh excess solids production of an extended aeration process treating unsettled wastewater with a BOD of 200 mg/l and suspended solids concentration of 240 mg/l, assuming k=0.35.

  How much would her first deposit be in actual dollars

On her 23 birthday, and engineer decides to start saving toward building ip a retirement fund that pays 8% interest compounded quarterly (market interest rate) She feels that 600,000 worth of purchasing power in today's dollars will be adequate

  Determine the maximum force that can be safely exerted

Determine the maximum force that can be safely exerted by link AB

  Determine the design compressive strength for a pinned ended

Determine the design compressive strength for a pinned ended HSS 8x8x3/8 column of ASTM A500, grade B steel with an unbraced length of 35ft?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd