Compute the signal voltage at the detectors output

Assignment Help Electrical Engineering
Reference no: EM13227823

20 SI fibers, 2 km long each, are spliced together for a 40 km link. Each fiber has a loss rate of 1-dB/km and a numerical aperture of 0.24. Each splice adds 0.5 dB of loss. A laser diode has a threshold current of 10 mA and emits at 3 mW/mA rate. A diode current of 15 + 3sin t (mA) produces an optical signal, which is coupled into this 40 km SI fiber. After 20-km propagation length, an erbium-doped fiber amplifier having a gain of 15 dB amplifies the signal before the signal is recorded by a photodetector at the end of this link. This

photodector has a responsivity = 0.5 A/W and a load resistance of 100 connectors are used and each one has 1 dB loss. Compute the signal voltage at the detector's output.

Reference no: EM13227823

Questions Cloud

Describe system using feedback loops and detailed narrative : Be sure to describe which of the Control Theory's would apply to the concept. Be sure to describe the system using feedback loops and a detailed narrative.
How much optic power must reach the receiver : An analog system has a bandwidth of 10 MHz, a photodetector of = 0.5 A/W and ID = 1 nA, and a signal to noise ratio (SNR) of 30 dB. The receiver's temperature is 270 C and the load resistance is 50 .
How would you define the level of diversification : How would you define the level of diversification shown by the McLaren Group? You will need to use appropriate tools to assess the logic of the portfolio to support your conclusion.
Discuss the chaos theory : Discuss the Chaos Theory (Be sure to read the lectures concerning this theory, as well as go through the additional links) in relation to the health care system today.
Compute the signal voltage at the detectors output : 20 SI fibers, 2 km long each, are spliced together for a 40 km link. Each fiber has a loss rate of 1-dB/km and a numerical aperture of 0.24. Each splice adds 0.5 dB of loss. A laser diode has a threshold current of 10 mA and emits at 3 mW/mA rate.
How much should the father deposit at the end of each year : If the fund earns interest at 8.5% per year ,compounded annually ,how much should the father deposit at the end of each year, up through the 17th year ?
Define the ph of a benzoic acid-benzoic buffer that consists : what is the [H3O+] and the pH of a benzoic acid-benzoic buffer that consists of 0.15 M C6H5COOH and .47 M C6H5COONa? (Ka of benzoic acid = 6.3 * 10^-5)
Define are your observation and explanation : What if any experimental evidence do you have that the equilibrium is affected by the addition of concentrated HCL? Explain Are your observation and explanation in A consistent with Le Chatelier's Principle? Explain
Determine what is the transistors emitter current : 1) in a swamped common-emiter BJT amplifier, as shown below, if Vcc =12 V, R1 =8.2 kohm, R2=10 kohm, Rc = 500 ohm, Re= 1 kohm, Vbe = 0.7 V, and B =100, what is the transistor`s emitter current

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Calculate the distance

Calculate the distance, D at which communication from the space craft will be lost again? Assume both antennas are ideal.

  Define murray loop test and locating faults

Murray Loop Test and Locating Faults, Q.1 (a) Using the Murray Loop test, determine the distance to an earth fault on one of the cores of a uniform three-core underground cable. Ra = 2 ohms, Rb = 1 ohm

  Draw the gate-level diagram

Write the logic equation for Y in terms of A,B,C that solves this problem, and draw the gate-level diagram.

  How to use semi-infinite medium assumption to solve problem

Consider unsteady diffusion across a membrane of thickness L. Initially, the concentration of solute in the membrane is zero. At time zero, the concentration at x=0 is raised to C0 and the concentration at x=L is maintained at zero.

  Implement a multiple mode counter

Implement a multiple mode counter

  What is the maximum allowable value of r2

For the amplifier in Fig. P4.20, the maximum value of VS is 2 V and the op-amp can deliver no more than 100 mA. (a) If +-10 V supplies are used, what is the maximum allowable value of R2 (b) Repeat for +-3 V supplies.

  Find the ratio of the effective density of states

n the conduction band of a semiconductor, it has a lower valley at the center of the Bril- louin zone, and six upper valleys at the zone boundary along [100]. If the effective mass for the lower valley is 0.1m0 and that for the upper valleys

  Explain what do the letters pcm and pam stand for

What do the letters PCM and PAM stand for? Why is PCM transmission preferred over PAM transmission? Give at least two reasons in your answer.

  From what distance must the electron be red

From what distance must the electron be red if it is to just fail to strike the plate?

  Which is not always possible within fcc guidelines

Transmitting data at higher speeds generally requires a wider bandwidth, which is not always possible within FCC guidelines. In addition to the wider bandwidth, higher speed transmission also requires a higher transmit power. Why

  Derive a dynamic model of the car speed v

Suppose a car of mass m moving on a straight west-east highway at velocity v(t) (positive for motion from west to east) experiences aerodynamic drag force with magnitude v(t) opposing its motion.

  Explain ac circit analysis and max power transfer

AC Circit analysis and max power transfer, If the output impedance of a certain driving circuit is 50 Ohm - j10 Ohm, what value of load impedance will result in the maximum power to the load?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd