Compute the base to acid ratio needed to make a ph

Assignment Help Chemistry
Reference no: EM13312808

Calculate the base to acid ratio needed to make a pH 3.80 buffer from acetic acid (Ka = 1.8 x 10-5) and sodium acetate.

Reference no: EM13312808

Questions Cloud

Find out the magnesium content : Determine the magnesium content (in ppm) of a 100.00 mL sample of drinking water if the following data were obtained. Titrant is 0.0551 M EDTA, 12.41 mL were used when an aliquot of the sample was at pH 13.0, 18.63 mL were used for an aliquot at p..
What is the speed of the puck : A hockey puck slides off the edge of a table at point A with an initial velocity of 20.0 m/s, What is the speed (not the velocity) of the puck just before it touches the ground
Depict the product obtained when trans-3-octene : Draw the product obtained when trans-3-octene is treated first with Br2 in CH2Cl2, second with NaNH2 in NH3, and then finally with H2/Lindlar's catalyst.
Find the capacitance of the capacitor : An empty parallel plate capacitor is charged with the charge Q= 5uC (One plate of the capacitor carries the carge +Q and the other carries the -Q). Find the capacitance of the capacitor
Compute the base to acid ratio needed to make a ph : Calculate the base to acid ratio needed to make a pH 3.80 buffer from acetic acid (Ka = 1.8 x 10-5) and sodium acetate.
What is the input force : Use Pascal's principle. Given that Fout is 98 lb., the areas of the output and input cylinders are Aout 22 in2 and Ain 5 in2, what is the input force
How to find out the [h3o+] and [oh-] : Determine the [H3O+], [OH-], pH, and pOH for each of the following solutions. A solution of 1.65 x 10-4 M HCl
What is the outward force on the window : A viewing window in the Atlanta aquarium is 58 inches wide and 52 inches high. what is the outward force on the window
By how many percents did the wavelength of the peak change : The temperature of a black body is increased by 10.5 percents. By how many percents did the wavelength of the peak change

Reviews

Write a Review

 

Chemistry Questions & Answers

  What is the difference between the ideal and real pressure

what is the difference between the ideal pressure (as predicted by the ideal gas law) and the real pressure (as predicted by the van der Waals equation)?

  Compute the theoretical yield and percent yield

camphor was reduced by an excess of sodium borohydride to make 1.3 g of isoborneol. Calculate the theoretical yield and percent yield for this reaction.

  Explain magnesium can be obtained by precipitating

Magnesium can be obtained by precipitating Mg^2+ as Mg(OH)2(s). The Ksp of Mg(OH)2 is 6.0*10^-10. The magnesium ion concentration is 0.059M. If a sample of solution is treated so its [OH-] concentration is maintained at 2.0*10^-3M

  State solution of potassium hydroxide

what is the concentration of chromium ion present in a 0.07092 M solution of potassium hydroxide in contact with a large excess of a precipitate

  Compute the single ion actvity coefficients

calculate te single ion actvity coefficients for Cs^+, Cd^2+, Al^3+ and dissolved H2CO3 s a function of ionic strength

  What is the molarity of the saturated solution

the solubility of O2(g) in water is 4.43 mg O2/100 g H20 at 20 degree Celsius when the gas pressure is maintained at 1 atm. What is the molarity of the saturated solution?

  Calculate the initial rates for initial concentration

My lab is of an iodine clock reaction. I am being asked to calculate the initial rates for experiments 1, 2, and 3 from delta [S2082-]/ delta time. I know how to use the initial rate method however I am confused on how to obtain the initial concen..

  The amount of boiling water required to raise

The amount of boiling water required to raise the temperature of 25 kg of water in the bath to body temperature is 4.8 kg. In this process, the heat lost by the boiling water is equal to the heat gained by the room-temperature water.

  Define what is the final temperature of contents

Beaker B contains 100.0g water heated to 20C.The contents of the two are mixed. What is the final temperature of contents? Assume no heat as lost.

  Compute how many moles of ethanol are used

Use a molar mass of 800g/mol for the vegetable oil and use a density of 0.88g/mL for vegetable oil and 0.79 g/mL for methanol to calculate how many moles of ethanol are used.

  Explain what volume of sodium hydroxide is diluted

What volume of 6.00 M sodium hydroxide in milliliters must be diluted to 209.0 mL to make a 1.50 M solution of sodium hydroxide

  Explain often produced by reaction of zinc with hcl

Small amounts of hydrogen gas are often produced by reaction of zinc with HCl; Zn(s) + 2 HCl(aq) ® H2(g) + ZnCl2(aq) How many liters of H2 gas, collected over water at a pressure of 176.6 mm Hg and temperature of 22.00 °C

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd