Compute several points of the velocity profile and plot data

Assignment Help Civil Engineering
Reference no: EM13317394

A large pipeline with a 1.200 meter inside diameter carries oil similar to SAE 10 at 110 degrees celcius (sg=0.8). Compute the volume flow rate required to produce a Reynolds number of 3.60 x 10 ^4. then, if the pipe is clean steel, compute several points of the velocity profile and plot the data.

Reference no: EM13317394

Questions Cloud

What would be the void ratio for a total pressure of 800 kn : When the total pressure acting at midheight of a compressible clay layer is 100 kN/m^2, the corresponding void ratio is 1.09. When the total pressure increases to 400 kN/m^2, the corresponding void ratio decreases to 0.89.
In order for both rob and big to benefit from trade : Suppose that Rob and Big both raise animals and sell them. Because Rob and Big have different talents, they have varying abilities to raise these animals.
At what depth would the vertical effective stress in deposit : At what depth would the vertical effective stress in a deep deposit of clay be 100 kpa, if e=1.1 The ground water level is a 1 m delow ground surface and S=95% above the groundwater level. Neglect pore air pressure.
Restricting imports from other nations will save : Evaluate the statement: Restricting imports from other nations will save U.S. jobs. Include both advantages and disadvantages in you argument.
Compute several points of the velocity profile and plot data : A large pipeline with a 1.200 meter inside diameter carries oil similar to SAE 10 at 110 degrees celcius (sg=0.8). Compute the volume flow rate required to produce a Reynolds number of 3.60 x 10 ^4.
Although unemployment tends to increase during a recession : The unemployment rate in October 2008 reached a 14 year high at 6.5%. As of the end of 2008, the recession did not appear to be ending any time soon.
Find flow rate in pipe whose water surface elevations differ : A 110 f t long, 5 in in diameter (f = 0:033) connects two reservoir whose water surface elevations differ by 12 f t. Compute flow rate in pipe.
Assume you are a u.s. citizen and currently you can exchange : Assume you are a U.S. citizen and currently you can exchange $180 (USD) for 125 GBP (British Pounds). What is the indirect quote relating the USD to the GBP?
Find the flow rate if the pump puts 22 hp in to the flow : At A, the pipe diameter is 24 in and the pressure is 45 psi. At B, the pipe diameter is 12 in and the pressure is 50 psi. Point B is 3 f t lower than A. Find the flow rate if the pump puts 22 hp (16 kW) in to the flow. Neglect head losses.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the weight w of the container to a ceiling

a container is supported by three cables that are attached to a ceiling. Determine the weight W of the container, knowing that the tension in cable AB is 6 kN

  How to compute the elevation of points at stations

Tabulate station elevations for a 200-ft equal-tangent parabolic curve with g1= -1.25%, g2= +1.25%, VPI station = 146+00, and VPI elevation = 1,895.00 ft. Compute values if stakeout is at 30-ft increments. Check by second differences

  Provide expression for velocity and acceleration of airplane

The path of the airplane is described by the equation y=kx^2, where k=6 x 10^-4 m^-1. Provide the expression for the velocity and acceleration of the airplane when x=390m. Express the velocity in m/s and the acceleration in m/s^2.

  Provide qualitative evluation of site as a basis for a phase

the weekly volume placed on the soil was 25% of the pore volume for the top 0.5m of soil. the soil is a clay loam characterized by an iron oxide content of 4.6% and 2,9% organic carbon.

  Compute the flexural strerangth if the load is fracture

A three point bending test is performed on a glss specimen having a rectangular cross section of hight d =6 mm and width b = 12 mm the distance between support points is 45mm.

  Estimate the hydraulic retention time if the reactor is pfr

A biological reactor is used to treat wastewater from a small community (Q = 100,000 gpd). The influent BOD5 concentration to the reactor is 200 mg/L and the required effluent BOD5 concentration is 30 mg/L.

  Determine is there a chance that cavitation will occur

Temperature is 20°C. A constriction in the pipeline causes velocity to increase to 13 m/s within the constriction. Assuming that Bernoulli's equation applies (i.e. p + ½ ? v2 = constant), is there a chance that cavitation will occur

  What was the no2 concentration in parts per million

A 1 m3 sample of air was found to contain 88 mg/m3 of NO2 .The temperature and pressure were 25.0°C and 103.2 kPa when the air sample was taken. What was the NO2 concentration in parts per million

  Find the magnitude of the particles position and velocity

The position of a particle P moving in the horizental plane is described by r(t)= (5t^2 i +2te^0.1t j) m. Find the magnitude of the particle's position, velocity, and acceleration at time t=2 sec.

  Compute the maximum acceptable tensile service load

Compute the maximum acceptable tensile service load T that may act on a single angle L6x4x3/4 that is welded along only one leg to a gusset plate; thus, there are no holes. The service load is three times the dead load. Solve for a0 A36 steel.

  Find the combined rate of discharge from the two orifices

A tank has two identical orifices, each 5 cm in diameter in one of its vertical sides and are situated one above the other. The upper orifice is 4 m below the water surfaceand the lower one is 6 m below the water surface.

  What value for fy are two forces perpendicular to each other

what value for Fy are the two forces F1=4i+Fyj+20K(N) and F2=8i-5j+7k(N) perpendicular to each other

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd