Compute evaporation rates in the winter and in the summer

Assignment Help Civil Engineering
Reference no: EM13297689

At a certain location during the winter, the average air temperature is 10 degrees celcius and the net radiation is 40W/m^2 and during the summer the net radiation is 200W/m^2 and the temperature is 25 degrees celcius. Compute the evaporation rates in the winter and in the summer in mm/day, using the Priestley-Taylor Method. Assume B=0 and Y=66.8Pa/degrees celcius.

Reference no: EM13297689

Questions Cloud

How much did the investor lose on the purchase of the bond : An investor buys a $1,000, 20 year 7 percent (interest paid semiannually) bond at par. After five years have passed, interest rates are 10 percent. How much did the investor lose on the purchase of the bond?
Determine how many bolt and hole have to be recycled : You are going to assemble 1,000 bolt + hole combinations. The bolts have a mean diameter of 1.000 cm, normally distributed with standard deviation of 0.010 cm. The holes have a mean diameter of 1.030 cm, normally distributed with standard deviatio..
What was the annual return you earned on this investment : How much will you have when the bond is retired after twelve years? What was the annual return you earned on this investment?
What is the possible range of prices for this bond : If interest rates are currently 9 percent on comparable high-yield securities but the investor has no forecast as to future rates, what is the possible range of prices for this bond?
Compute evaporation rates in the winter and in the summer : At a certain location during the winter, the average air temperature is 10 degrees celcius and the net radiation is 40W/m^2 and during the summer the net radiation is 200W/m^2 and the temperature is 25 degrees celcius.
What is the number of payments per year : What is the number of payments per year where the costs of the two banks will be equal? Assume Dupree's cost of funds is 9%.
Determine the tension t and the reaction at b and d : Two transmission belts pass over sheaves welded to an axle supported by a thrust bearing at B and a journal bearing at D. The sheaves A has a radius of 50mm, and the sheave at C has a radius of 40mm.
Create a logical expression : Create a logical expression that corresponds to the following statement - Complete the truth table for the expression created.
Case study of the business of your choice : Report - Case Study of the Business of Your Choice,  This assessment requires you to identify and describe a notable example of business invention, entrepreneurship, or innovation of an existing business of your choice.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine what is the total resistance of the loads

You have 4 resistors (loads) in parallel. What is the total resistance of those loads The loads are as follows 4ohms, 6ohms, 16ohms and 1 ohms. When calculating 1/R, round to the fourth decimal point. Percentage of error margin is 0.5

  Explain about atterberg limits and cohesion for shear test

What relationship between Atterberg limits and cohesion for Shear test

  Force required to hold the pipe

A 0.3-m diameter pipeline terminates in a nozzle of outlet diameter = 0.15 m. When water flows through this pipe at a rate of 0.25 m3/s, the force required to hold the pipe (N) is most nearly.

  Cantilever mass-less beam

Consider a cantilever mass-less beam subjected to a concentrated mass at the tip of the beam. Assume, length L, flexural stiffness EI, and mass m.

  Determine the change in length of the aluminum alloy tube

An aluminum alloy tube of length 600mm and circular cross section with an inner diameter of 32mm and an external diameter of 36mm is subjected to an axial tensile force of 25kN. Find the change in length of the tube.

  What is the difference between factor of safety

what is the difference between factor of safety in rankine & coulomb in overturning, sliding and bearing capasity ?

  Calculate the coefficient of consolidation

For the soil and foundation conditions in fig. 1, determine the time required to reach 75% consolidation in the clay given the consolidation test results and determine the coefficient of consolidation

  Calculating the undrained shear strength

Calculate the undrained shear strength at a depth of 120 ft below the mudline. Calculate the undrained shear strength at a depth of 120 ft below the mudline if the soil has an OCR of 2.5 .

  Bisection method to find the root of equation

Use the bisection method to find the root of the equation f(x) = x 2 - 4sin(x) = 0. For initial bracketing interval [a,b] , take a=1 and b = 3.

  Calculate the concentration of 137 cs in cows milk

After the Chernobyl accident, the concentration of 137Cs in milk was proportional to the concentration of 137Cs in the glass that cow consumed. The concentration in the grass was, in turn, proportional to the concentration in the soil.

  Scale of a spring balance problem

The scale of a spring balance reading from 0 to 235 N has a length of 13.0 cm. A fish hanging from the bottom of the spring oscillates....

  Determine the relevant pi groups

The break up of a liquid jet into droplets of diameter d depends on the jet diameter D, the jet velocity V, viscosity Mu, density rho,and surface tension sigma.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd