Compute azimuths of all lines for aclosed traverse

Assignment Help Civil Engineering
Reference no: EM13529931

Compute azimuths of all lines for aclosed traverse ABCDEFGHA that has the following balanced angles tothe right, using Bearing AB = N56º18'42"W.

Balanced angles: HAB = 78º26'59",ABC = 153º07'38",BCD = 203º58'37",CDE = 83º52'50",DEF = 98º11'03",EFG = 218º24'21",FGH = 94º24'52",GHA = 149º33'40".

Reference no: EM13529931

Questions Cloud

What is the pressure inside the glass : A glass is cleaned in 45 0C hot water and placed onthe table bottom up. The room air at 20 0C thatwas trapped in the glass gets heated up to 40 0C andsome of it leaks out so the net resulting pressure inside is 2 kPaabove ambient pressure of 101 kPa...
Determine the reactions on the beam : Determine the reactions on the beam. The support at B can beassumed to be a roller.
Course ab of a five-sided traverse runs due east : Course AB of a five-sided traverse runs due east. From the given balanced interior angles (listed below) to theright, compute and tabulate the bearings and azimuths from northfor each side of the traverse.
Compute and tabulate the bearings of the sides of a regular : Compute and tabulate the bearingsof the sides of a regular pentagon (polygon with five equalangles), given the starting direction of sideAB.
Compute azimuths of all lines for aclosed traverse : Compute azimuths of all lines for aclosed traverse ABCDEFGHA that has the following balanced angles tothe right, using Bearing AB = N56º18'42"W.
What is the new quality and pressure : Water at 120 0C with a quality of 25 % has itstemperature raised 20 0C in a constant volumeprocess. What is the new quality and pressure? Draw P-vand T-s diagrams
Compute the angular misclosure : The interior angles in a six-sided closed polygon traversewere observed as:
Show by counter example that if f isnot onto then : Suppose that F1 ο G2 =F1ο G1 then F : S→ T, G1 : T → U, G2 :T →U,. Define a function F : R2 ? R2 by F(x, y) = (x +y, x - y). . Show that if F is onto, Suppose that G1ο F = G2 ο F.
What torque is required to drive the disk : A 2.25 Adisk spins within an oil-filled enclosure,having 2.4-mm clearance from flatsurfaces each side of the disk. The disk surface extends from radius 12 to 86 mm.What torque is required to drive the disk at 660 rpm if the oil's absoluteviscosity is..

Reviews

Write a Review

Civil Engineering Questions & Answers

  F-m ration for conventional activated sludge plant

A 4000-m 3 /day conventional activated sludge plant has an influent with a BOD5 of 190 mg/L and SS of 225 mg/L. What population would this plant serve?

  Find what is the minimum distance from the stalled car

The road is in good condition and is initially dry, but it becomes wet 160 ft before the stalled car (and stays wet until the car is reached). What is the minimum distance from the stalled car at which the driver could apply the brakes and still s..

  Determine the support reactions in a steel i beam

A steel I beam is supported by a pin at point A and a rocker at B, and a cable applies a 2000lb force. The beam is uniform and weighs 26 lb/ft. Determine the support reactions.

  Factor of safety with respect to tensile failure

The maximum gage pressure is known to be 8MPa in a spherical steel pressure vessel having a 250mm diameter and a 6mm wall thickness. Knowing that the ultimate stress in the steel used is (sigma u)= 400MPa, determine the factor of safety with respe..

  Determine the normal stress on the outside of the frame

A building frame is made with a 10" square steel box shape that has an area of 15 in^2 and a moment of inertia I =225 in^4. The frame consists of pinned supports at points A and F and an internal pin at point D.

  Determine max pressure at bottom of gate 2

Find max pressure at bottom of gate (psi) 2. Total horizontal force on gate 3. moment about the bottom of the gate

  Calculate what is the magnetic declination of true bearing

The true bearing of the line a-b is S 88*50' W, the magnetic bearing of the line d-c is N 89*45' E. What is the magnetic declination

  What is the elevation of the curve at station of the pvi

An equal-tangent crest curve connects a +2% initial grade with a -1% final grade, and is designed for 55 mi/h. The station of the PVI is 233 + 40 with elevation 1203 ft.

  Determine an appropriate plywood thickness and span rating

For a total floor load of 75 psf on 2x floor framing at 24 o.c., determine an appropriate plywood thickness and span rating assuming panels with edge support and panels oriented perpendicular to the framing. Specify the minimum fasterners and spac..

  Provide the engineering judgement to justify the shipment

The pressure inside the cylinder is 50 atm and temperature is 298o K. Provide your engineering judgement (with calculations) to justify or not justify the shipment of the cylinder.

  Find channel cross section and the required channel slope

A rectangular channel is to carry 200 cfs. The mean velocity must be greater than 2.5 fps. The channel bottom width should be about twice the channel depth. Find the channel cross section and the required channel slope.

  Determine by trigonometry corresponding magnitude of r

Knowing that the magnitude of P is 35 N, determine by trigonometry (a) the required angle a if the resultant R of the two forces applied to the support is to be horizontal, (b) the corresponding magnitude of R.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd