Calculate what ground distance will be measured

Assignment Help Civil Engineering
Reference no: EM13316843

What ground distance will be measured if grid distance is 2158m and Orthometric height = 850m, Scale factor Sf = 0.9999943, Geoidal separation N = 27m, Ra = 6371km

Reference no: EM13316843

Questions Cloud

Determine the worked deeloped in kj per kg of air : air enters a turbine operating at steady state at 8 bar, 1127 C and exits at 1.5 bar, 347 C. The heat transfer from the turbine to its surroundings is 10 kJ/kg of air flowing through the turbine.
Find the magnitude of the charge on each : The electric field midway between two equal but opposite point charges is 745 N/C, What is the magnitude of the charge on each
Estimate number of raccoons that attempted to cross highway : nighttime traffic on a single lane of rural highway is light, with a flow of 40 vehicles/hour , and is well described by a Poisson arrival process. A racoon dashes across the road, without looking at a speed of 12 mph.
Determine the concentration in weight percent of v : Iron and vanadium both have the BCC crystal structure, and V forms a substitutional solid structure in Fe for concentrations up to approximately 20 wt% V at room temperature.
Calculate what ground distance will be measured : What ground distance will be measured if grid distance is 2158m and Orthometric height = 850m, Scale factor Sf = 0.9999943, Geoidal separation N = 27m, Ra = 6371km
What is the area left ungrazed by the horses : Four horses are tethered at 4 corners of a square field of side 70 metres so that they just cannot reach one another. What is the area left ungrazed by the horses
Determine what is the geodetic az of the line : The grid Az of a line is 142° 25' 18". If the convergence angle is 1° 05' 34" and the arc to chord correction is 2.1", what is the geodetic Az of the line
What are the spcs83 coordinates and convergence angle : What are the SPCS83 coordinates and convergence angle for a station in the Colorado Central zone with geodetic coordinates of 39° 44' 40.74141"N, 105° 00' 07.48466"W
Determine the magnitude of the electric field : A small object, which has a charge q = 7.4 µC and mass m = 9.85 10-5 kg, is placed in a constant electric field. Determine the magnitude of the electric field

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the optimum emise velocity per unit speed

If the aircraft flies at 9000 m standard altitude, make a plot of drag (in N) versus speed (from stall to 240 m/s) and determine the optimum emise velocity (minimum drag per unit speed).

  Chlorination tank for killing microorganisms

You are to design a chlorination tank for killing microorganisms in the effluent from a wastewater treatment plant. It is necessary to remove 99% of active bacteria in a wastewater flow of 120 m 3 /hr.

  Find what is the force of thrust in the horizontal direction

Water flows through the interior of a jet ski at 40ft^3/s. The water enters the boat at 75ft/s at an angle of 30 degrees to the water surface. The exit velocity id 85ft/s in the horizontal direction. The boat is in seawater at 60 degrees F.

  Total delay and maximum queue length

Determine total delay, maximum queue length, and the time that the 20th vehicle to arrive waits from its arrival to its departure.

  Briefly describe the measures

Briefly describe the measures that should be considered for the control of corrosion of embedded steel in concrete.

  Determine the dimensions of an ideal circular settling tank

determine the dimensions of an ideal circular settling tank that can remove 0.01-in diameter particles with a specific gravity of 1.01. Use a detention time of 1.5 hours, flowrate= 4ft^3/sec, the specific weight of water=62.4 lb/ft^3

  Determine the torque required to rotate the cylinder

A 25-mm-diameter shaft .5 m long is pulled through a cylindrical bearing. The lubricant that fills the 0.3-mm gap between the shaft and bearing is an oil having a kinematic viscosity of 8.0 × 10-4 m2/s and a specific gravity of 0.91.

  Why is too much fluoride in drinking water a problem

A chemical mixing basin is to be designed to blend chlorine and treated wastewater. The basin flow is 700 gallons per minute and the basin dimensions are 5 feet by 5 feet by 5 feet water depth.

  Describe is the compaction satisfactory in labratory tests

Maximum dry unit weight was found to be 114lb/ft^3 at a water content of 13.5% in labratory tests. Results of a field unit weight test were dry unit weight=111lb/ft^3 and a water content 11%.

  Supporting Investment Promotion: ERNST & YOUNG

Ernst & young is currently providing support to various sectors. In this regards it was felt that if this report is able to document good practices currently being adopted or planned in ceramic sector.

  Horizontal and vertical component from this acting force

What would be the Horizontal and vertical component from this acting force see diagram

  How to plot the shear and moment diagrams for the beam

Given simply supported beam with an overhang. The beam is 12 inches wide by 24 inches deep, and the slab is 6 inches deep. use a roof live load of 20 psf, and a concrete density of 150 pdf. the beams are spaced 15 feet apart.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd