Calculate volumetric flow rate and mass flow rate

Assignment Help Other Engineering
Reference no: EM13558617

1. Air passes through a 1.5m-diameter ventilation duct at a velocity of 3.0 m/s. Calculate the volumetric flow rate and the mass flow rate assuming that the air has a density of 1.12 kg/m3.

2. During a ventilation survey the cross-sectional area of a mine airway is measured to be 25 m2. Anemometer traverses of the airway have been undertaken and the results from four such traverses at the area measuring site indicated that on the first pass a total of 231 m of air was registered on the anemometer. In the second traverse 245 m was measured, in the third 238m and in the final traverse 228m. Given that each anemometer traverse was timed over 100 s, determine the average flow velocity of the air and the air quantity flowing.

3. Measurements of gas concentration at a particular site underground indicate that the concentration of methane in the general body of the air is 0.85%. If 33.5 m3/s of air is flowing at the site determine the volume of methane present in the airstream?

4. A Pitot-static tube is used to measure air velocity as part of a ventilation survey. At a particular measuring site a velocity pressure of 950 Pa is measured, assuming the air has a density of 1.12 kg/m3 what is the air velocity at that point?

5. Describe the method of undertaking an anemometer traverse for a mine airway, what particular precautions have to be taken when undertaking such a traverse?

6. Describe the gauge and tube method of undertaking a pressure survey in a mine. What advantages and disadvantages does this method have?

7. Describe a method of undertaking a point measurement traverse for airflow in a circular duct using a pitot static tube, are there any standards avialble for such a traverse?

8. Measurements of an airway show that the height is 4.5m and the width is 5m. What is the cross-sectional area of the airway and what is the perimeter?

9. An explosion occurs when a pre-mixed cloud of gas and air (or other oxidiser) combusts resulting in a rapid increase in pressure. Four conditions must exist underground for an explosion to occur. Name the four conditions and give a brief description thereof.

Reference no: EM13558617

Questions Cloud

Find the electrostatic force acting on each particle : In the bohr theory of the hydrogen atom an electron moves in acircular orbit about a proton. the radius of the orbit is0.53x10^-10m. find the electrostatic force acting on each particle
An extreme amusement park ride accelerates : An extreme amusement park ride accelerates its riders upward from rest to 50.0 m/s in 7.00 seconds. Ignoring air resistance, what average upward force does the seat exert on a rider who weighs 1120 N?
Explain hcl would you require to make 1 l of the buffer : For an enzyme assay you require a 50 mM Tris-HCl buffer, pH 7.8. How many grams of Tris (mw = 121, pKA = 8.1) and how any ml of 2 M HCl would you require to make 1 L of this buffer
Evaluate what is the total resistive force : At a certain part of yourdrive from home to school, your car (mass = 1400 kg) will coast inneutral at a constant speed of 84 km/h if there is no wind. What is the total resistive force
Calculate volumetric flow rate and mass flow rate : Calculate the volumetric flow rate and the mass flow rate(ENMIN 5023 Mine Ventilation)- determine the average flow velocity of the air and the air quantity flowing -  what particular precautions have to be taken when undertaking such a traverse?
What is the index of refraction of the plate of glass : The problem is determining the index of refraction. A microscope focuses on a tiny scratch in the upper surface of a plate of glass,then the barrel position is recorded. Next the microscope is lowered by 1.87mm and a focused image of the scratch i..
Explain what is the ph of the na2hpo4 buffer : A buffer is prepared by mixing 500 ml of 0.4 M Na2HPO4 with 500 ml of 0.2 M NaH2PO4. what is the pH of this buffer? What would be the final pH if you added the same quantity of acid to 1 litre of H2O (pH 7)
Explain for one mol sample of an ideal gas at stp : For one mol sample of an ideal gas at STP, is it possible to suggest an isobaric process that will result in the volume of the gas doubled and its absolute temperature tripled and Is it possible to carry it out via non isobaric process
Calculate what is the wavelength of the laser light : Light from an argon laser strikes a diffraction grating that has 5340 lines/cm. Determine the wavelength of the laser light

Reviews

Write a Review

Other Engineering Questions & Answers

  To examine the relationship between fermenter design and

to examine the relationship between fermenter design and operating conditions oxygen transfer capability and microbial

  Actors will interact with the processes on the use case

create a use-case diagram for the crm system following the uml guidelines in appendix a of the textbook.doc sharing

  Define the fundamental responsibilities and key

write a six to eight page paper in which younbsp1.define the fundamental responsibilities and key characteristics of

  Draw a ds1 frame and label it in detail

What is the data rate of a single channel on a T1 connection that does not use bit robbing?

  Formulate dr. konurs maximum-flow problem as a linear model

Represent Dr. Konur's problem on a network by defining the nodes, node values (if any), arcs, arc costs (if any), arc capacities (if any) and state it as a maximum-flow problem and mathematically formulate Dr. Konur's maximum-flow problem as a lin..

  What is the primary assumption behind using an analyst

What is the primary assumption behind using an analyst and what is the purpose behind the data collection?

  Solve a spreadsheet model for the problem

Mathematically formulate a linear programming model for the problem and formulate and solve a spreadsheet model for the problem.

  What is meant by point-of-operation guards

What is meant by point-of-operation guards and What are the three types of point of operation guards? What are their advantages and limitations and Briefly describe four requirements that all safeguards should have.

  Describe a tunnel-boring machine in detail

Describe a tunnel-boring machine in detail and cite examples of their use. Particular emphasis should be placed on the cycle of operations for such a machine.

  Analysis of the vehicle component

Analysis of the vehicle component: role, work conditions, requirements for the role and

  Inspection planning problem

Formulate a binary linear programming model for the above inspection planning problem by defining you decision variables and writing the objective and objective function and the constraints in terms of your decision variables.

  Question 1a develop a safety program to help reduce the

question 1a develop a safety program to help reduce the risks of electrical hazards in a workshopb in terms of

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd