Calculate the weight percent proeutectoid cementite present

Assignment Help Civil Engineering
Reference no: EM13560305

1.Using the equation PV = nRT and the units given below, make the equation dimensionally consistent. Use units Pa, cubic meters, mols, and kelvin for your final answer:

pbar-psi, vbar-cubic chains, nbar-mol, rbar-liters*mmHg/k/mol, tbar-degrees Rankine.

2.A 1.10% Carbon hypoeutectoid plain carbon steel is slowly cooled from 900 degrees C to just slighty below 723 degrees C calculate the weight percent proeutectoid cementite present in this steel.

Reference no: EM13560305

Questions Cloud

Make a preliminary selection of member size : The service loads on a steel truss member are PDL: 120 kips (tension), PLL =240 Kips (tension), PWL = 200 kips (tension/compression). Steel properties are Fy = 46 ksi, Fu = 58 Ksi. Using the tables in the AISC manual, make a preliminary selection of ..
Calculate the weight percent austenite and weight : A .90% Carbon hypereutectoid plain carbon steel is slowly cooled from 900 degrees C to just slighty above 723 degrees C calculate the weight percent proeutectoid cementite and weight percent austenite present in the steel.
What is the drawdown halfway between well a and well b : Two pumping wells, A and B, are 100m apart. They each completely penetrate a homogeneous, confined aquifer, and pump at exactly the same rate, 5m^3/day. Prior to pumping
Why bother target marketing : Q1. 'Why bother target marketing? By marketing my product to the entire market, I have a greater chance of success.' Discuss this statement by comparing the benefits of using targeting as opposed to not using it. Your discussion should demonstrate th..
Calculate the weight percent proeutectoid cementite present : A 1.10% Carbon hypoeutectoid plain carbon steel is slowly cooled from 900 degrees C to just slighty below 723 degrees C calculate the weight percent proeutectoid cementite present in this steel.
Organizing to implement cost leadership strategies : Organizing to implement cost leadership strategies
Find the area that an array of these solar cells would need : Assume that a gallon of gas contains 114,000 BTUs of energy and that a brilliant engineer has created an 80 percent efficient solar cell. Find the area (in square smoots and in square feet) that an array of these solar cells would need to power the a..
What would you do the same : What would you do the same?
What it would the horizontal distance between the two point : A construction suveyour using a steel tape is pulling a critcal measurement for layout of a building. The terrain in the in the immediate area does not allow for level measuring area.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculate the entropy change of the universe that occurs

The tank is insulated on the outside and the partition between the two sections is also an insulator. The partition can withstand a pressure differential across it of 400 kPa, before rupturing.

  Determine what is the carbonaceous oxygen demand

Given a water that contains 80 mg/L of glucose (C6H12O6) and 18 mg/L of ammonia (NH3): a. What is the carbonaceous oxygen demand (in mg 02/L) b. What is the nitrogenous oxygen demand (in mg 02/L)

  Determine what is the total resistance of a wheel tractor

a wheel tractor scraper weighing 100 tons is being operated on a haul road which is a rutted dirt roadway (little maintanence) this tractor is traveling empty down a 5% slope. what is the total resistance

  Determine the final temperature of the water

A piston-cylinder device contains 0.2kg of water initially at 800 kPa and 0.06m^3. Now 200 kJ of heat is transferred to the water while its pressure is held constant. Determine the final temperature of the water.

  Determine what is the rate of flow into the reservoir

Runoff from a storm flows into a reservoir with a surface area of 20.0 ha at a constant rate. The reservoir level is observed to rise at 1 mm per minute when water is being released through the dam at a rate of 10 m3 per second.

  Compute the new thickness of sand over extra strata

A 1.20-m thick strata of sand has a void ratio of 1.81. A contractor passes a vibratory roller over this extra strata, which densifies it and reduces its void ratio to 1.23. Compute its new thickness.

  Determine the irr of building the corrosion-resistant tower

HZ Wireless must rebuild a cell tower recently destroyed by a tornado. A tower made of normal steel (NS) will cost $30,000 to construct and should last 15 years. Maintenance will cost $1000 per year.

  What is the so2 concentration caused only by second plant

An existing power plant has been found to produce SO2 concentration of 20µg/m3 at a distance of 800m directly downwind from the stack when the wind is 4m/s from the north during a class C stability situation.

  Calculate the loss of pressure which will occur in pipeline

An 180 m long 100 mm diameter compressed air pipeline is to be run from a stationary compressor to an air-track drill which requires a flow of 780 l/sec. The pipeline contains 2 large radius bends (R=2d) ,and 4 half closed gate valves.

  Find wall friction head loss and the friction force on duct

Water at 60 degrees Fahreneit flows at 3 cfs through a 150-ft-long duct of 6 in X 9 in cross section. The pressure at the inlet end is 15 psig, and at the outlet, 20 ft higher than the inlet, it is 4 psig.

  The column bearing is 12 in. measured along the beam

A W24X94 beam on a 6 ft span underpins a column that brings 110 kips dead load and 280 kips live load to its top flange at a location 2.5 ft from the left support.

  What is the change in length in the unloaded direction

A brass cube (E=100 GPa, v = 0.25(Poisson's ratio)) is 100 mm long per side. A compressive force of 100kN is applied to one side, while a tension force of 200 kN is applied to a second side.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd