Calculate the volume of pfr to achieve disinfection

Assignment Help Civil Engineering
Reference no: EM13562608

A drinking water system treats a flow of 3000 gallons per minute. Consider disinfection of a bacteria by ozone with an inactivation constant of K=0.06/min. To reduce the number of bacteria from 400 bact/ml to 4 bact/ml.

A) Calculate the volume of PFR to achieve disinfection

B) Calculate the volume of CMFR to achieve disinfection

Reference no: EM13562608

Questions Cloud

Calculate the buoyant force on the chamber : An undersearesearch chamber is spherical with an external diameter of 6.00 m. calculate the buoyant force on the chamber
Calculate the required flow-rate : The owner of a dive shop wants to purchase a constant displacement air compressor capable of simultaneously filling 10 SCUBA tanks. each having a volume of 0.4 ft^3. in 20 minutes. The initial pressure is 500 psig and the final pressure is 3000 psig...
Reduce the concentration in the lake below : Creek A has been identified as the easiest to control. What would the P concentration have to be reduced to in Creek A, in order to reduce the concentration in the lake below 0.025 mg/l?
What is the age of the basket : An archeologist on a dig finds a fragment of an ancient basketwoven from grass. What is the age of the basket
Calculate the volume of pfr to achieve disinfection : A drinking water system treats a flow of 3000 gallons per minute. Consider disinfection of a bacteria by ozone with an inactivation constant of K=0.06/min. To reduce the number of bacteria from 400 bact/ml to 4 bact/ml.
Determine appropriate dimensions of the finished water : Cylinders C and D are attached to the end of the cable. if D has a mass of 600 kg, determine the required mass of C, the maximum sag h of the cable, and the length of the cable between the pulleys A and B. The Beam has a mass per unit length of 50 kg..
Find scale factors the vector ds the volume : In this problem find ds^2,scale factors,the vector ds,the volume(Or area) element,the a vectors ,and the e vectors for parabolic cylinder coordinates u,v,z
Determine the aeration period : Two activated sludge aeration tanks in Podunk, MO are operated in series. Each tank has the follwing dimensions: 7.0 m wide x 28.0 m long x 3.5 m effective liquid depth. The plant operating parameters are:
What current flows through the bulb in this case : A light bulb is rated at 60 W when connected to 120V. What current flows through the bulb in this case

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine at what point does the new method pay off

Assume that a new method allows her to sort 20 rings/min but costs $500 to implement. Is it worth implementing the new method for a batch of 50,000 rings. At what point does the new method pay off.

  Explain what is the cost breakdown structure

What is the cost breakdown structure(CBS)? What are its purposes? What is included (or excluded)? How does it relate to a work breakdown structure (WBS)?

  Determine what is the mass of the particles collected

a stream f gas flowing at 3000 cfm has a particulate loading of 50gr/ft what is the allowable exit loading if 95 % collection efficiency is required. what is the mass of the particles collected

  Determine moisture content required to have full saturation

A sample of dry soil is mixed uniformly with 16 wt% water and then compacted into a cylindrical mold in the laboratory. The volume of moist soil is 1x10-3 m3 and its mass is equal to 1.60 kg.

  Calculate the heat and work excahnged during the process

a piston-and-cylinder device contains 5 kg of water initially at 150 C and 0.20 MPa. The frictionless piston is then pushed slowly in an isothermal process until the volume of water becomes 10% of its initial value.

  Determine the required value for m

A 1 meter diameter cylindrical mass, M, is connected to a 2 meter wide rectangular gate. The gate is to open when the water level, h, drops below 2.5 meters. Determine the required value for M. Neglect friction at the gate hinge and pulley.

  Calculate volume of gasoline in the tanker at time of cash

Hypothetically, upon leaving the filling station, tire pressure for each tire on the 18-wheeler was measured as 105 psi (gauge), and the wheel contact area with the ground was a 6.0 in by 7.0 in rectangle.

  Calculate what is the rolling resistance of the road

A four-wheel tractor whose operating weight is 47,877 lb is pulled up a road whose slope is +3.5% at a uniform speed. If the average tension in the towing cable is 4,860lb, what is the rolling resistance of the road

  What is flow rate in cfs from the higher to the lower pipe

Water is flowing from a higher to a lower reservoir through a 24-inch pipe that has a Darcy friction factor of 0.02. The local loss coefficients for the bends, entrances, and exits sum to 3.5.

  Find the low point of curve of the intersection at station

The curve is 750-ft long,and the minus grade of 3.6 percent intersects the plus grade of 6.2percent at station 240 + 80.00. Calculate the low point of thecurve if the intersection at station 240 + 80.00 is at elevation426.84.

  What is the estimated collection efficiency at 250degree f

Our ESP is collecting 95% of the particles in our exhaust stream. We are under pressure to improve its performance. It has been suggested that if we were to cool the inlet gas from the present 600°F to 250°F

  Determine the maximum possible precipitation at new york

Determine the maximum possible precipitation at New York City that may be encountered on a 100 mi^2 drainage area over a 96 hr period.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd