Calculate the steady state p concentration in the lake

Assignment Help Civil Engineering
Reference no: EM13310424

A lake is stricken due to phosphorus excess leading to eutrophication and low dissolved oxygen. The target P concentration in the lake is <0.025 mg/l

The currect P inputs are as follows:

Creek A: Q=315 L/s, P=0.045 mg/l

Creek B Q=20L/s, P=0.048 mg/l

Creek C Q=28L/s, P=0.053 mg/l

Other non point sources: P in =221 kg/yr

Loading from an internal lake sediments P in =2158 kg/yr

Settling rate within the lake P out = 2030 kg/yr

A) calculate the steady state P concentration in the lake

B)Creek A has been identified as the easiest to control. What would the P concentration have to be reduced to in Creek A, in order to reduce the concentration in the lake below 0.025 mg/l?

Reference no: EM13310424

Questions Cloud

Find the diameter of the path followed by the alpha particle : An alpha particle, which is a helium nucleus, has a mass of 6.64*10^-27 kg. It is travleing horizontally at 42.3 km/s when it enters a uniform, What is the diameter of the path followed by the alpha particle
How to choose the particular approach : For each one justify why you would choose the particular approach and what advantages / disadvantages there might be.
Calculate the volume of cmfr to achieve disinfection : A drinking water system treats a flow of 3000 gallons per minute. Consider disinfection of a bacteria by ozone with an inactivation constant of K=0.06/min. To reduce the number of bacteria from 400 bact/ml to 4 bact/ml.
Write equations depict how each of the weak bases : Write equations showing how each of the following weak bases ionizes water to form OH- a) HCO3- b) CH3NH2 Identify all of the phases in the answer (ex: NH3 = NH3(aq)+H2O(l) NH4+(aq)+OH-(aq))
Calculate the steady state p concentration in the lake : A) calculate the steady state P concentration in the lake B)Creek A has been identified as the easiest to control. What would the P concentration have to be reduced to in Creek A, in order to reduce the concentration in the lake below 0.025 mg/l
Compute the effective focal length of the lens system : A telephoto lens consists of a converging front lens of focal length f1 and diverging back lens of focal length f2 separated by a distance d. Compute the effective focal length of the lens system
Define what is the minimum amount of h2so4 : what is the minimum amount of 6.0 M H2SO4 necessary to produce 25.0 g of H2 according to the reaction between aluminum and sulfirc acid 2Al + 3H2SO4 ---> Al(SO4)3 + 3H2
Designing effective hrd programs : Having read about the assessing HRD needs, designing effective HRD programs, and the implementation of HRD programs, consider the three questions arise that are listed below.
Provide three us and two international locations : 1. Povide three non-pavement products that use asphalt and by weight, what is the percent that is asphalt 2. Provide three US and two international locations where asphalt or its parent material, crude oil, originate from for use int the US

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is the effective stree at the base of the aquifer

THE WATER TABLE OF A SATURATED , UNCONFINED AQUIFER COINCIDES WITH THE LAND SURFACE. THE AQUIFER IS 52 FT THICK AND THE MATERIAL HAS A UNIT WET WEIGHT OF 135 LB/FT^3.

  Check whether the pressure is adequate for service

If the elevation of the pipeline at the treatment plant is 125 m, estimate the pressure in the pipeline 1 km downstream where the elevation if 110 m. Hint: Use the Colebrook equation to estimate f, and the energy equation to estimate P2 .

  What is smallest particle size that will be removed in grit

What is the smallest particle size (density 2.65 g/cm3) that will be removed in a horizontal grit chamber 10 m long and 1.0 m deep if the flow rate is 1000 m3/hr. Assume the temperature of the water is 25°C.

  Discuss the different environmental companies

Discuss the different agencies, institutes, centers, different environmental companies that are active in UAE.

  Determine the maximum distortion energy theory of failure

At a certain location on the surface of an engineering component, the material is in a state of plane stress with principal stresses of fmax = 150 MPa and fmin = 50 MPa (both tensile). If the yield strength of the material is Y = 350 MPa

  Calculate the depreciation expense of the equipment

At the end of year 1 the piece of equipment is worth $15,000 and at the end of year 2 $13,000, and at the end of the third and final year the salvage value is equal to $9,000.Applying the straight line depreciation, calculate the depreciation expe..

  Determine what will the discharge be in each branch

A 48-in water main carries 79 cfs and branches into two pipes at point A. The branching pipes are 36 and 20 in. in diameter and 2800 and 5000 ft long, respectively. These pipes rejoin at point B and again form a single 48-in.

  Calculate the f per m ration for the aeration tank

An activated sludge process receives 4000m^3 / day containing 120 mg BOD /L from the primary settling tank and 3500 m^3/day Containing 25mg BOD/L from the secondary settling tank.

  Tackling the problem of making tunnel

You are a Project Manager on site where work for 3K.m. long Tunnel has been undertaken. The site is remote and takes about 2 days travel to nearest town. Supervisors, Technicians & Skilled Workers are engaged in dangerous / hazardous work.

  What is the outlet concentration after the treatment

A completely mixed retention basin is used to treat an industrial waste water consisting of a non-conservative pollutant, using a reaction that destroys the pollutant according to first-order reaction kinetics, with k = 0.216/day.

  Calculate the quality of the steam exiting heat exchanger

A chemical plant uses a tube-­within-­a-­tube counterflow heat exchanger to heat air with the use of steam. During steady state operation, the air flows into the exchanger at a rate of 5,000 kg/h and a temperature of 27C and exits at a temperature..

  Load that a boat can carry without sinking in a lake

The hull of a boat has a volme of 150m and the total mass of the boat when empty is 8560kg. determine how much load this boat can carry without sinking in a lake.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd