Calculate the resulting diameter of the rod

Assignment Help Civil Engineering
Reference no: EM131191483

A metal rod with 0.5 inch diameter is subjected to 2000 lb tensile load. Calculate the resulting diameter of the rod after loading. Assume that the modulus of elasticity is 10,000,000 psi, Poisson's ratio is 0.33, and the yield strength is 21,000 psi.

Reference no: EM131191483

Questions Cloud

What is the amount owed/refunded by the weisss : Mike and Laura Weiss are married and file a joint return. Mike is a self-employed orthodontist, and Laura is a college professor. What is the amount owed/refunded by the Weiss's for 2015?
What interest rate does surething inc need to offer : What interest rate does Surething Inc., need to offer to make Hugh indifferent between investing in the two bonds?
Why must firms adopt the identified roles : In general, identify senior management's specific role in these large-scale strategic quality programs? Cheerleader? Role model? Decision maker? Resource provider? What else?
What is the pv of leasing cost : After deciding to buy a new car, you can either lease the car or purchase it on a three- year loan.- What is the PV of leasing cost?- What is the PV of the purchasing cost? Should you lease or purchase?
Calculate the resulting diameter of the rod : A metal rod with 0.5 inch diameter is subjected to 2000 lb tensile load. Calculate the resulting diameter of the rod after loading. Assume that the modulus of elasticity is 10,000,000 psi, Poisson's ratio is 0.33, and the yield strength is 21,000 ..
Compare treatment of dividend by otter corporate and gerald : Marmot Corporation pays a dividend of $100,000 in the current year.- Compare and contrast the treatment of the dividend by Otter Corporation and Gerald.
Calculate the maximum drawdown : A well of 0.1 m radius is part of a well point network to keep an excavation dry (Figure P6.13). The groundwater at the far edge of the excavation must be 0.5 m below the base.
Identify symptoms and indicators : Identify emotional aspects [if left unresolved] and effects on workplace performance and Identify possible alternative outcomes.
Determine the amount of retained earnings : Determine the amount of retained earnings as of November 1.- Prepare an income statement for November and , a retained earnings statement for November.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Provide the expression for the velocity and acceleration

An airplane A takes off with a constant speed equal to vo=200 km/h. The path of the airplane is described by the equation y=kx^2, where k=6 x 10^-4 m^-1. Provide the expression for the velocity and acceleration of the airplane when x=390m. Express th..

  About lightweight concrete note about lightweight

note about lightweight concreteits type and how to prepare proposal about new lightweight concrete innovation? ltbrgt

  Find the surface water elevation of reservoir c

If the pipe lengths ar L1 = 3000ft, L2 = 2200, and L3 = 1600 ft the respective pipe diameters are 15,10, and 18in, and the surface water elevations of two of the three reservoirs are A = 125ft and B = 55ft, find the surface water elevation of Rese..

  How many identical reactors does sony music company require

The plant currently has one CMFR for removal of chromium. How many more identical reactors does the sony music company require to meet the regulatory requirements for chromium discharge of 0.01 mg/L into the Pitman Sewer?

  Determine estimated unknown speed if the data were obtained

In an attempt to estimate the speed of a vehicle just before it hit a traffic signal pole, a traffic engineer measured the length of the skid marks made by the vehicle and performed trial runs at the site to obtain estimate if the coefficient of f..

  Rappahannock above the point where the two streams mix

The Rappahannock River near Warrenton, VA has a flow rate of 3.00 cms. Tin Pot Run (a pristine stream) discharges into the Rappahannock at a flow rate of 0.05 cms

  Why were these chosen for their particular situations

Why were these chosen for their particular situations? Sketch a detail of each partition.

  What total cylinder length is required for platform to float

The floating platform is supported at each corner by a hollow sealed cylinder 1 m in diameter. The platform itself weights 30kN is air, and each cylinder weighs 1.0kN/meter of length.

  Determine the maximum stress and strain in the ball

A rubber ball is inflated to a pressure of 65 kPa .At that pressure the diameter of the ball is 240mm and the wall thickness is 1.25 mm.The rubber has a modulus of elasticity E of 3.6 Mpa and a poisoon'd ratio of 0.48.

  What range of reactor volumes is necessary to achieve

To achive a specific level of disinfection a water treatment plant operator determines the" Ct" value 180mg min/l is necessary with units for disinfectant concentration C in mg/l and disinfectant contact time t in minutes

  Design a ssf constructed wetland and a tile drain for house

A family of six in a five bedroom house would like to treat their wastewater in an onsite septic system, constructed wetland, and tile drainage (leach field) system. They will be generating a maximum of 1.2 m3/d of septic tank effluent.

  Compute magnitude of the velocity and acceleration vectors

A Ferris wheel with a radius of 35 feet starts from rest and undergoes an angular acceleration of 0.05 rad/s^2. Compute the magnitude of the velocity and acceleration vectors at 5 seconds for a point on the rim of the Ferris wheel.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd