Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
A total station is used for detail survey for an area. Two control points A "station" (1000E, 1000N) and B "backsight" (594.22E, 877.68N) are available within the area. Indicate the procedure to satisfy the orientation and calculate the required total station reading towards B.
A Carnot heat engine is supplied with a high temperature heat source at a rate of 200 kW. If the power output of the heat engine is 120 kW, determine the required source temperature if the heat sink temperature is 20 °C.
Assume that the design temperature and residence time have been established as 1300 degrees F and 0.6 seconds, respectively. The type of burner used in the process requires outside air at a mass ratio of 12:1 (air to fuel gas).
A siphone generates a flow of 1 ft/sec thru a 1 inch OD, 3/4 ID hose. A) What height difference is needed to generate this flow B) What height for 10 ft/sec C) What for 100 ft/sec
A tracer study was conducted to assess groundwater velocity and showed that a slug of a conservative tracer took 34 days to travel the 10-m distance between two wells.
A hurricane has an average rainfall depth of 9in over a 200-mi^2 watershed. What is the size of the reservoir needed to contain 20% of the rain completely.
An earthen channel will be excavated into sandy soil for which Vmax = 4.0 ft/sec, n = 0.022, and the recommended m = 3. The channel will have a bottom slope of 0.0011 and accommodate a design flow of 303 cfs. Design (size) the channel section.
plane gate of uniform thickness holds back a depth of water. Find the minimum weight need to keep the gate closed. theta=30degrees L = 3m w = 2m
What mass (in grams) of steam at 100°C must be mixed with 387 g of ice at its melting point, in a thermally insulated container, to produce liquid water at 26.0°C? The specific heat of water is 4186 J/kg·K. The latent heat of fusion is 333 kJ/kg, ..
The force F = 90i + 60j + 20k acts at the point (0,0,40). Compute the moment of the force about a line through the origin that has direction cosines (1/sqrt(3), 1/sqrt(3), 1/sqrt(3), 1/sqrt(3)).
A 50-m tape is used to measure between two points. The average weight of the tape per meter is 0.320 N. If the measured distance is 48.888 m, with the tape supported at the ends only and with a tension of 100 N, Find the corrected distance.
Given: elastic modulus of steel is 200 GPa, yield and ultimate tensile strength of steel are 600 and 750 MPa, respectively.
Torque is transferred through two shafts by means of gears. If the diameters of gears B and C are in the ratio 1:2, what should the ratio of shaft diameters be so that both shafts have the same shear stress
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd