Calculate the rate of change of water mass in the segment

Assignment Help Civil Engineering
Reference no: EM13310199

The segment of river shown has a rectangular cross-section, with width 50 ft. The river bed is at angle theta=10 degrees from horizontal. The average velocity is 2 ft/s at the upstream end, and 3 ft/s at the downstream end. The vertical depths are as follows: delta_Z1= 4 ft and delta_Z2 =3:5 ft. Fresh water is owing at a temperature of 60 degrees F.
Find:
a)Find mass flow rate (m=roeV*A) at control sections 1 and 2
b)Calculate the rate of change of water mass in the segment.

Reference no: EM13310199

Questions Cloud

What information can be brought to bear : We do know that the client has an advertising plan and budget in place where in he is presently spending 5% on creation of ad and 95% on airing of the commercial. It has been seen that the quality of advertise designing is falling and not upto the..
Determine what is the rate of water to be added to the tank : A hole at the bottom of a fish tank releases water at a rate given by the free jet equation. The hole at the bottom has a .5" diameter. If the water level is desired to be at 2' high and be at steady state,
Determine the force acting on an electron : Determine the force acting on an electron moving at 2.5 x 10^5 meters per second when it enters a magnetic field perpendicular to its direction of motion
The specific knowledge of market structures : The specific knowledge of market structures gained to the Panera Bread Company.
Calculate the rate of change of water mass in the segment : The segment of river shown has a rectangular cross-section, with width 50 ft. The river bed is at angle theta=10 degrees from horizontal. The average velocity is 2 ft/s at the upstream end, and 3 ft/s at the downstream end.
Define what is the hydronium-ion concentration of a solution : What is the hydronium-ion concentration of a solution formed by combining 700. mL of 0.19 M HCl with 300. mL of 0.52 M NaOH at 25ºC
What resistor is needed to create the necessary coil voltage : The available relay for switching a secondary circuit requires 4 volts and has a coil resistance of 145 ohms. If a voltage divider circuit is used to reduce the voltage to activate the relay, what resistor is needed to create the necessary coil vo..
Compute the percent ionization of hypobromous acid : Calculate the percent ionization of hypobromous acid (HBrO) in solutions of each of the following concentrations (Ka = 2.5e-09.) (a) 0.135 M % (b) 0.583 M % (c) 0.601 M %
What is the value of the spring constant of the spring : If the mass is suspended by a spring M = 200g, What is the value of the spring constant of the spring

Reviews

Write a Review

Civil Engineering Questions & Answers

  Find length of 10 equal-sized aeration basins for treatment

Calculate the length of 10 equal-sized aeration basins for secondary treatment of a wastewater flow of 10 MGD with 20,000 lb of BOD per day for a conventional activated sludge process with a maximum loading of 40 lb BOD/ 1000 ft3*d.

  Calculate the relative compaction

A dam project specifies 97% compaction. Lab tests on the soil being used indicate that it has a maximum dry density of 1900 kg/m3 at an optimum water content of 13.2%. Field tests give the following results: Field dry density is 1790 kg/m3 and 16...

  Determine the force of the rod on the particle and the force

The particle has a mass of 0.6 and is confined to move along the smooth horizontal slot due to the rotation of the arm .Determine the force of the rod on the particle and the normal force of the slot on the particle when = 35.

  Find equilibrium flows and travel time before reconstruction

The routes are currently in user equilibrium. A reconstruction project on route 1 reduces capacity to 3.0 kvph, but total travel demand is unaffected. Field studies note a 35.28 sec increase in average travel time

  Determine the bod of biodegradable industrial wastewater

A biodegradable industrial wastewater (paper production) has a COD of 600 mg/ L. If the BOD progression follows first-order kinetics with a rate constant of 0.10 per day, determine the BOD5

  By what percentage is the capacity of the flume reduced

determine the width of the flume to be used such that the depth of flow immediatly upstream of the throat under design conditions is 1 m. By what percentage is the capacity of the flume reduced if the downstream depth is 0.85m

  Determine the effective size as well as the uniformity

Determine the effective size as well as the uniformity coefficient and coefficient of curvature for each soil. Determine also the percentages of gravel, sand, silt, and clay according to (a) ASTM, (b) AASHTO, (c)USCS, and (d) the British Standard.

  To what maximum angle, measured from vertical

To what maximum angle, measured from vertical, does the rod (with the attached ball of clay) rotate?

  Determine the pressure difference between a and b

Fluids A and B ave specific gravities .75 and 1.00 respectively. If the mercury is used as manometer liquid determine the pressure difference between A and B

  What percentage of the hexane entering the condenser

A gas stream contains 18.0 mole% hexane and the remainder nitrogen. The stream flows to a condenser, where its temperature is reduced and some of the hexane is liquefied. The hexane mole fraction in the gas stream leaving the condenser is 0.0500.

  Determine the normal depth yo and critical depth yc

A 1 m diameter unfinished concrete pipe (n = 0.015) has a slope of So = 0.001 and conveys water at Q = 0.5 m3/s. Find the normal depth yo and critical depth yc.

  Compute the resisitivity at a reservoir depth of 8000 feet

Given the total dissolved solids in a brine is 20,500 ppm, compute the resisitivity at a reservoir depth of 8,000 feet.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd