Calculate the production energy required for a 4 kwp system

Assignment Help Civil Engineering
Reference no: EM13316779

The story: The Civil Engineering Department would like to have solar panels installed on the roof of Ghausi Hall to supply some of its electricity use - after all there is plenty of space on the roof and plenty of sun in Davis. Based on cost constraints the department decides it can install a 4.0 kWp system (the subscript p refers to rated power). Given the solar radiation in Davis (an annual average 5.47 kWh/m^2/day) the system could produce 7986.2 kWh/year. However, PV panels produce direct current (DC), which needs to be converted to alternating current through an inverter prior to use. Unfortunately this conversion is only 77% efficient (this is often refered to as a ‘derate factor'). There are additional inefficiencies due to (i) temperature effects on panel performance, (ii) increased inverter inefficiency at
high loads, and (iii) reflectivity of the panel surface. Summed on an average annual basis, these inefficiencies lead to an additional 10% loss of efficiency.

The photovoltaic panels: PV system manufacturing requires approximately 2300 kWh of primary (i.e. life cycle) energy per kW of rated power (2300 kWh/kWp).
Though most PV panels sold in the U.S. are produced in China, the brand selected by department are produced in Rochester MI, USA, and are transported by truck to Davis - a total distance of 2,330 miles. PV systems weigh approximately 300 lb/kWp. Freight truck energy intensity is approximately 0.025 gallons of diesel per ton-mile (assume U.S. short tons). Diesel has an energy content of 124,000 BTU/gal. In addition, 15,000 BTU of energy is used in the production of 1 gallon of diesel. Useful conversion: 1 kWh = 3412.14 Btu.

1. PV Production
a. Calculate the production energy required for a 4 kWp system. Report your answer in units of kWh.
b. Calculate the total transport energy required to deliver the PV system to the department in Davis. Report your answer in units of kWh.
c. Trains use about 1/10th the energy as trucks to move 1ton of freight 1 mile (0.025 gal/tonmi). Recalculate part b. assuming panels travel 180 miles by truck, and 2150 miles by train. Report your answers in kWh.

2. PV Electricity Production
a. Based on the location in Davis and the panel efficiency information, calculate the annual electricity production from the 4 kWp panel array.

3. Energy Indicators
a. Calculate the energy payback time - in other words - how many years does it take to produce as much energy as went into producing and transporting the PV system?
i. Assuming truck transport as in 1.b.
ii. Assuming combined truck and rail trainsport as in 1.c.
b. Assuming the PV system has a productive life of 20 years, and that there are no losses in efficiency over time, what is the net energy ratio for the system? Assume truck transport only (as in 1.b.).
c. Calculate the fossil energy intensity of PV-generated electricity (on a per-kWh basis) using the same assumptions as in 3.b. Your units will be kWh_Fossil /kWh_Generated.

Reference no: EM13316779

Questions Cloud

Find the power dissipated in the in the resistor : A 76.1-%u03A9 resistor is connected in parallel with a 125.6-%u03A9 resistor. find the power dissipated in the 125.6-%u03A9 resistor
What is the angular-momentum quantum number : The orbital angular momentum of an electron has a magnitude of 4.716*10^-34 kg*m^2/s. What is the angular-momentum quantum number l for this electron
Determine the two resistances : Two resistors have resistances R(smaller) and R(larger), where R(smaller)
At what temperature and in what phase will final mixture be : At a reception, a 0.5 kg chunk of ice at -10 degres Celsius is placed in 3.0 kg of "iced" tea at 20 degrees Celsius. At what temperature and in what phase will the final mixture be
Calculate the production energy required for a 4 kwp system : The story: The Civil Engineering Department would like to have solar panels installed on the roof of Ghausi Hall to supply some of its electricity use - after all there is plenty of space on the roof and plenty of sun in Davis.
Define different career tracks within information technology : The range of information technology (IT) jobs is extensive, but all IT professionals focus on improving usability and the efficiency of technological systems and processes.
Would these motels be better off renting rooms : But in the off-season, when the kids are back at school, one can find rooms for as little as $60 a night. Assume the average fixed cost of a room per night, including local government rates, insurance, taxes and depreciation, is $75.
What power is supplied to the motor : An automobile starter motor has an equivalent resistance of 0.0480 and is supplied by a 12.0 V battery with a 0.0080 internal resistance. What power is supplied to the motor
Write an accessor function to get the angle : Write a friend function to compare the area of a rectangle with sides 12 and 8 to the area of a parallelogram with sides 14 and 18 and an acute angle of 40 degrees. Test it in main, and check the answer by hand.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Depth of the sedimentation tank

A drinking water treatment plant will be designed to process a flow of 15,000 m3/d. The sedimentation tank will have a residence (detention) time of 4 hours and the overflow rate (Q/A) of 16 m 3 /m 2 -day. Estimate the required surface area (A), an..

  What is the spring constant

suppose you apply a force of 14.4 N to a spring and it stretches 2.4 cm. what is the spring constant?

  Find the flow rate per unit thickness for a section midway

Two piezometers are located 1000 ft apart with the bottom located at depths of 50 ft and 350 ft, respectively, in a 400-ft-thick unconfined aquifer. The depth to the water table is 50 ft in the deeper piezometer and 40 ft in the shallow one.

  What is the design flow capacity for tailwater of tw

Two box culverts each is 0.61 m by 0.61 m and has n = 0.013, Ke = 0.05, Cd = 0.85, L = 30 m, So = 0.7%, and HW = 1.5 m. a. What is the design flow capacity for free outlet condition b. What is the design flow capacity for tailwater of TW = 1 m

  Calculating the relative compaction of a dam project

A dam project specifies 97% compaction. Lab tests on the soil being used indicate that it has a maximum dry density of 1900 kg/m 3 at an optimum water content of 13.2%.

  Determine the force p required to pull the shaft at velocity

A 25-mm diamenter shaft is pulled through a cylindrical bearing. The lubricant that fills the 0.3-mm gap between the shaft and bearing is an oil having a kinematic velocity of 8.0x10^-4 m^2/s and a specific gravity of 0.91.

  Find reservoir in acre-ft that would be required to contain

A hurricane has an average rainfall of 9 in over a 200 mile^2 watershed. What is the reservoir in acre-ft that would be required to contain 20% of the rain completely

  Find uniform annual amount that is equivalent to gradient

Find the uniform annual amount that is equivalent to a uniform gradient series in which the first year's payment is $500, the second year's payment is $600, the third year's payment is $7000,

  What size square conduit is needed to transport

A 30mm pipe X 460mm rectangular duct carries air. What size square conduit is needed to transport 4m cube per sec of water at a distance of 45m and head loss of of 1.08m.

  Set aside the sale of bungalow

Three days later, Abu sees his solicitors and executed the transfer of his said bungalow to Abdul Samad at the said value. Two month later, Abdul Samad expelled Abu from the religious group. Abu now wants to set aside the sale of his bungalow.

  Compute cbr to penetrate 5 mm in calibrated rock soil

10 kPa of pressure required to push a 3 in^2 piston 5 mm into the compacted soil. Compute the CBR (%) if the same 3 in^2 piston required 100 kPa to penetrate 5 mm in calibrated rock soil.

  Determine the force exerted on the cable by the man

The man has a mass of 75 kg, and the beam has a mass of 40 kg. The beam is in equilibrium with the man standing at the end and pulling on the cable. Determine the force exerted on the cable by the man and the reactions at pinned support C.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd