Calculate the pressure at the clay-sand interface for two

Assignment Help Civil Engineering
Reference no: EM13533443

A clay lense of Kc=0.10cm/day is sandwiched somewhere inside avertical soil column of height 100cm that is otherwise filled withsand of Ks=200cm/day. A depth of water d=10cm is ponded abovethe surface.

a. If the actual flux rate is Jw = -15cm/day, how thick is the claylense?

b. Calculate the pressure at the clay-sand interface for two cases:1) clay on top of the sand and 2) clay on the bottom of thevertical sand column.

Reference no: EM13533443

Questions Cloud

Operated as a two-way street with parking permitted : Determine the service flow rate with a level of service B for asection of 4-lane freeway (2 lanes in each direction) with 10-ftlanes and obstructions 4 feet from the traveled pavement on oneside of the roadway. The section has a 5% grade 0.95 miles l..
Find the magnitude of the velocity at t=30 seconds : A motorcycle starts from rest at time t=0. The force on it from t=0to 30 seconds is F=300-9t. The combined mass of the motorcycle andthe rider is 225 kg. Use the Impulse and Momentum method to find the magnitude of the velocity at t=30 seconds.
The corresponding increase in the diameter of the vessel : A spherical gas container having an outer diameter of 15 ftand a wall thickness of 0.90 in. is made of a steel for whichE =29*106 psi and v = 0.29. Knowingthat the gage
Determine the corresponding height of capillary rise in soil : The void ratio of a given soil A is twice that of another soil B,while the effective size of particles of soil A is one-third thatof soil B. The height of capillary rise of water in soil A on acertain day is found to be 400 mm. Determine the correspo..
Calculate the pressure at the clay-sand interface for two : Calculate the pressure at the clay-sand interface for two cases:1) clay on top of the sand and 2) clay on the bottom of thevertical sand column.
What is the maximum torque the tube can transmit if the : A thin tube of 1/8 in thickness has a mean diameter of 6 in. What is the maximum torque the tube can transmit if the allowable normalstress in compression is 10 ksi?
Find the rate that the trucks line up : A container ship carries 2000 units. It must be unloaded andre-loaded in a 48 hr turnaround. Two cranes are available. Find the rate that the trucks line up, load and pass under each crane.
Calculate the diameter of this pipe : Using the Hazen-Williams approach (seecoefficient table below), find the headloss of water flowingthrough 1,000-ft of 6-ft diameter concrete pipe at a flow rate (Q)of 80 ft3/sec
What is the oil flowrate in stb : Two wells had been drilled on 40-acre spacing. Well 1 is injectionand Well 2 is producing well. Downhole injection pressure is 8500psi, and bottomhole pressure in producing well is 2400 psi.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Usage rates if the community has a declining growth rate

Determine how many years from now the consumption will reach its design capacity with current usage rates if the community has a declining growth rate.

  Determine the error n in replacing the sine and the tangent

Determine the % error n in replacing the sine and the tangent of an angle by the value of the angle in radians for angle values 5,10,20 degrees. Explain the qualitative difference between the sine and tangent results.

  Determine the actual detention time observed in the field

Determine the actual detention time observed in the field of two circular settling tanks with depth 3.5 m that was designed to have an overflow rate not exceeding 60 m3/m2-day and a detention time of at least 2 hour.

  Calculate the approximate design load due to concrete

Calculate the approximate design load due to concrete pressurefor a wall fromwork 9ft high to be poured at 6.5ft per hour at atemperture of 68 degree f.

  Find the flow rate if the pump puts 22 hp in to the flow

At A, the pipe diameter is 24 in and the pressure is 45 psi. At B, the pipe diameter is 12 in and the pressure is 50 psi. Point B is 3 f t lower than A. Find the flow rate if the pump puts 22 hp (16 kW) in to the flow. Neglect head losses.

  Calculate the density of a mixture of air and so2 at a temp

calculate the density of a mixture of 90% air and 10% SO2 at a temperature of 150 degrees C and pressure of 1.10 atm.

  Resultant force from all fluids

A tank is filled with oil (specific gravity 0.8) and water to a depth of 10 meter and 6 meter respectively. Find the resultant force from all fluids acting on the gate of 1.8 meter by 9 meter.

  Estimate the shear strength on a horizontal plane at a depth

A site is underlain by a soil that has a unit weight of 118 lb/ft^3. From laboratory shear strenght tests that closely simulated the field conditions, the total stress parameters were measured to be C_T=250 lb/ft^2

  What is the average specific gravity of solid constituents

a soil sample is obtained by pushing a 16 in long tube into the side of a pit. the tube has an inside diameter of 3 in. and weighs 1.8 lb. The soil in the tube is trimmed so that its ends are flush with the ends of the tube.

  Determine entropy change of air during compression process

Air is compressed from an initial state of 100 kpa and 170 *C to a final state of 600 kpa and 57 *c. Determine the entropy change of air during the compression process by using a) property values from the air table and b) average specific heats

  A rectangular beam made using concrete with fc 6000 psi

a rectangular beam made using concrete with fc 6000 psi and steel with fy60000 psi has a width b 20 in. the concrete

  Determine the power developed by the force

determine the power developed by the force when t = 5s. Hint: First determine the time needed for the force to cause motion.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd