Calculate the maximum weight that can be sustained

Assignment Help Civil Engineering
Reference no: EM13546724

A heavy Machine is lowered into a pt by means of a rope wrapped around an 8" diameter stationary pole placed horizontally across the top of the pit. The coefficient of static friction for the rope on the pole is 0.35. The rope maked 1.5 turns around the pole. Calculate the Maximum weight that can be sustained if a person exerts a force a force of 50lb on the end of the rope?

Reference no: EM13546724

Questions Cloud

How is business use of car tax deducted : How is business use of car tax deducted?
How much energy in horsepower is lost by the water while : A pipeline 1200 ft long and 8 in. in diameter has at its inlet point 75ft of available hydraulic energy with respect to the reference level. The velocity in the pipe is 5 fps: the pressure at its end is 12psi.
What is working condition fringe benefit : What are some examples of benefits that are nontaxable to 2%+ shareholder-employees? Specifically, what is working condition fringe benefit?
When a sample of this soil is dried in the laboratory : The bottom of a rectangular flume is 5m above reference level. The depth of the water in the flume is 3m. The average velocity is 1.7m/s. Compute the hydraulic energy at the surface of the water and at the bottom of the flume.
Calculate the maximum weight that can be sustained : A heavy Machine is lowered into a pt by means of a rope wrapped around an 8" diameter stationary pole placed horizontally across the top of the pit. The coefficient of static friction for the rope on the pole is 0.35.
Comment on the following transactions : Comment on the following transactions
Calculate the work produced and heat rejected by this engine : A completely reversible heat engine uses a solar receiver for a hightemperature reservoir and a lake for a low temperature reservoir. The sun maintains the receiver surface at 290 ° F while the lake remains at 40 °F.
How large could the plant be without having the ground : A 35 percent-efficient coal-fired power plant with effective height of 100 m emits SO2 at a rate of 0.6 lb/10^6 Btu into the plant. If winds are assumed to be 4 m/s at the stack height and just over 3 m/s at 10 m
The total selling expenses for the month of january : What are the total selling expenses for the month of January?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the temporary hardness and permanent hardness

A well water has the following mineral contents in mg/L: Na+=20; K+=35; Ca+2 =15; Mg+2 =10; Sr=0.5; Cl- =40; HCO3- =65; CO3-2=5; SO4-2=15; and NO3=10.

  Determine what is the resulting solids concentration

Raw primary sludge at a solids concentration of 4% is mixed with waste activated sludge at a solids concentration of 0.5%. The flows are 20 and 24 gal/min, respectively. What is the resulting solids concentration

  Which the trailing vortices move downward under their own

An airplane with a weight of 10,000lb/f is flying at 600ft/s at36,000ft., where the airplane pressure is 3.3 p.s.i.a. and thetemperature is -67 degrees F. The lift coefficient is 0.2. The spanof the wing is 54 ft. Calculate the wing area and minimum ..

  A 200 lb homogeneous gate of 10 ft width and 5 ft long is

a 200 lb homogeneous gate of 10 ft width and 5 ft long is hinged at point a and held in place by 12 ft long brace as

  Calculate its book value using straight-line depreciation

An asset costs $14 000 and has a scrap value of $3000 after sevenyears. Calculate its book value using straight-line depreciation

  What is the lowest pressure expected in the prototype

A dam spillway is to be tested using kinematic similitude (Froude scaling) with a 1:20-scale model. The model flow has an average velocity of 0.7 m/s and a flow rate of 0.06 m3/s.

  A developer has requested permission to build a large retail

A developer has requested permission to build a large retail store at a location adjacent to the intersection of an undivided four-lane major road and a two-lane minor road.

  Find the maximum axial tension using lrfd

No incisions are noted. Find the maximum axial tension using LRFD. Can we resist the same force in compression if the member is 10ft long?

  Determine the percent overload if load estimate is correct

A customer estimates that he is getting 30 cubic yards (loose) of gypsum in his scraper. Determine the percent overload if the load estimate is correct. The maximum load capacity of the scraper is 84,000 pounds.

  Determine the storage coefficient over a surface area

Over a 100-mi^2 surface area, the average level of the water table for an unconfined aquifer has dropped 10 ft due to the removal of 128000 acre*ft of water from the aquifer. Determine the storage coefficient. The specific yield is 0.2 and the por..

  What is the difference in total cost between the two options

Two remediation options are being considered for a contaminated land area formerly used for industrial operations. Option 1 involves removing all of the contaminated soil over a two-year period at a cost of 2.2$ million per year

  What is the length and azimuth of the line connection points

if point D is at (100,100) and the line DE to "E" is 300 feet long at an azimuth of 225 degree , what is location of point E in the XY coordinate system. what is the length and azimuth of the line connection points (100,100) to (300,500)

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd