Calculate the mass of the green house gas and ozone

Assignment Help Civil Engineering
Reference no: EM13544491

Calculate the mass of the green house gas and ozone depleting substance CFC-11 (chemical Formula = CCl3F) in the atmosphere. Use units of GtC (giga tonnes carbon). Production of this substance is now banned and mixing ratios are slowly decreasing with time.

240.13 is the lastest montlhy mean mixing ratio in ppt.

Reference no: EM13544491

Questions Cloud

Compute the true static height : A Kennedy half dollar has a mass of 1.150 X 10-2 Kg. The coins is a mixture of silver and cooper, and in water weights 0.1011 N. What is the mass of the silver?
What is the concentration of bod in the jackson river before : The James Rives flows in from the East at 320 m^3/min and joins the Jackson River flowing at 605 m^3/min just outside the town of Charlotte, NC. The concentration of BOD in the James River is 14 mg/L
Perform multiple regression with real financial data : Perform multiple regression with real financial data - estimate the Fama - French 3-factor model for a list of twenty stocks and interpret the regression output.
Determine the magnitude direction and location on the beam : A first order reaction occurs in a PFR at the rate of 2.1 hr^-1. The reactor volume is 1400L and flow is 15 gpm. If the influent concentration is 200 mg/L, then what is the effluent concentration?
Calculate the mass of the green house gas and ozone : Calculate the mass of the green house gas and ozone depleting substance CFC-11 (chemical Formula = CCl3F) in the atmosphere. Use units of GtC (giga tonnes carbon). Production of this substance is now banned and mixing ratios are slowly decreasing wit..
Determine if the as-drawn wire will break during the process : A 0.02wt% C steel is to be carburized at 1200°C in 4 hrs with a point 0.6mm beneath the surface reaching 0.45wt%C. calculate the carbon content required at the surface of the steel.
Downstream response to imposed flow transformation : Write a paragraph ( 1 paragraph for i, ii, iii, & iv together) summarizing the following Holistic Methodologies Methods used to analyze environmental flow requirements.)
Terminal docks include casual workers who are hired tempor : In an Less-than-Truckload trucking company, terminal docks include casual workers who are hired temporarily to account for peak loads. At the Omah
Determine the coliform concentration at the beach : An ocean outfall diffuser that discharges treated wastewater into the Atlantic Ocean is 5,000 m from a public beach. The wastewater contains 10^5 coliform bacteria per milliliter.

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is shear force exerted by oil on m long section of pipe

the flow profile is such that u=u(max)*(1-(r/R)^2) where u is the flow speed and r is the distance from the centre of the pipe in the radial direction. What is the shear stress on the pipe wall What is the shear force exerted by the oil on a 1m lo..

  Estimate range of piezometric head differences to be used

A field sample of medium sand with median grain size of 0.84 mm will be tested to determine the hydraulic conductivity using a constant-head permeameter. The sample has the length of 30 cm and a diameter of 5 cm.

  The mass flow rate of the refrigerant and

Refrigerant R-134a enters the evaporator coils placed at the back of the freezer section of a household refrigerator at 120 kPa with a quality of 20 % and leaves at 120 kPa and -20°C. If the compressor consumes 450 W of power and the COP is 1.2

  Find the number of cycles of motion executed by the block

A metal block, placed on a rough surface, is attached to a spring and is given an initial displacement of 10 cm from its equilibrium position. It is found that the natural time period of motion is 1.0 s and that the amplitude reduces by 0.5 cm in ..

  Determine the theoretical discharge

A vertical triangular orifice in the wall of a reservoir has a base 0.9m long,0.6m below its vertex and 1.2 m below the water surface. determine the theoretical discharge?

  Unit of measurement and unit of payment

Write the unit of measurement and unit of payment of following items. 1) Earthwork in excavation in foundation. 2) Framwork. 3) Steelwork in trusses. 4) Damp proof course D.P.C. 5) Cement.

  Will the two drops collide

A carpenter uses a hammer to strike a nail. Approximate the hammer's weight of 1.8lbs, as being concentrated at the head, and assume that at impact the head is traveling in the -j direction

  What is limiting depth of the exacavation to avoid heaving

An excavation is proposed for a site consisting of a homogenous, isotropic later of silt clay, 14.24 m thick, above a deep deposit of sand. The groundwater is 2m below ground level outside the excavation. The groundwater level inside the excavatio..

  Provide the engineering judgement to justify the shipment

The pressure inside the cylinder is 50 atm and temperature is 298o K. Provide your engineering judgement (with calculations) to justify or not justify the shipment of the cylinder.

  Determine the flow of vehicles on the level section

From an aerial photograph, one observes that on a level section of a (multilane) highway, 25% of the vehicles are trucks, 75% are cars, and there are 50 vehicles per mile of highway. The trucks travel at 40 mph and the cars at 60 mph.

  Which is estimated at 1 billion had that rate continued

World population 10,000 years ago has been estimated at about 5 million. what exponential rate of growth would have resulaed in the population in 1850 , which is estimated at 1 billion had that rate continued

  The magnitude of the unit vector of bxa

For Vectors A=(i + 2j - 3k) and B=(4i - 5j + 6k), determine:

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd