Calculate the ideal effort force needed to overcome force

Assignment Help Civil Engineering
Reference no: EM13321179

Create a 60 degree inclined plane utilizing various building components, string, as single pulley , and a scientific mass. attach one end of the string to the scientific mass (resistance force) and the other end to a force-measuring device. Place the scientific mass on the inclined plane and string over the pulley. Using a force-measuring device, pull the string and determine the force needed to obtain static equilibrium.

b. calculate the ideal mechanical advantage of the inclined plane system described above.

c. Calculate the ideal effort force needed to overcome the known resistance force.

Reference no: EM13321179

Questions Cloud

Performance based factors and measures for quality assessmen : Performance Based Factors and Measures for Quality Assessment
How far would it have traveled as observed on earth : Suppose a muon produced as a result of a cosmic ray colliding with a nucleus in the upper atmosphere has a velocity v = 0.9500c. How far would it have traveled as observed on earth
Calculate maximum external pull in each gear of a tractor : calculate maximum external pull in each gear of a tractor when given speed, slope, weight, and rolling resistance
Determine the velocity of the boat after man have both dived : A 180 lb man and a 120 lb woman stand at opposite ends of a 300 lb boat, ready to dive, each with a 16 ft/s velocity relative to the boat. Determine the velocity of the boat after they have both dived
Calculate the ideal effort force needed to overcome force : Place the scientific mass on the inclined plane and string over the pulley. Using a force-measuring device, pull the string and determine the force needed to obtain static equilibrium.
What was the average acceleration of the bullet : A bullet moving at 244 m/s strikes a tree and penetrates a distance of 8.34 mm before stopping. What was the average acceleration of the bullet as it slowed
The city government is considering two tax proposals : Which of the following curves—average fixed cost, average variable cost, average total cost, and marginal cost—would shift as a result of the lump-sum tax? Why? Show this in a graph. Label the graph as precisely as possible.
Selling site available to the general public on the internet : Select any online selling site available to the general public on the Internet.
Determine the index of refraction for the material : Light propagates from soda lime glass (n=1.518) into a new material (n= ?). Determine the index of refraction for the material

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the time to obtain a density in seawater

Seawater flows steadily into an open 100 liter tank initially filled completely with freshwater. The freshwater mixes thoroughly with the seawater and the mixture overflows out of the tank.

  What error in pressure drop would ensue if assumptions made

horizontal pipe, and the fanning friction factor is f_F = 0.0060. what error in the pressure drop would ensue if the assumption were made that the flow was laminar, abandoning the previous value of the friction factor.

  Calculate the final temperature of xe in degree c

Two m^3 of xenon(Xe) are contained in a closed rigid tank at 70 degree C and 2 bar. The tank is heated to a pressure of 10 bar. Assuming that Xe behaves like an ideal gas with a specific heat ration of 1.7

  Find the maximum shearing stress and its location

Find the maximum shearing stress and its location in the shaft and the angle of twist of A with respect to C. Let G = 4x10^6 psi for the entire shaft.

  Determine the alkalinity and total carbonate concentration

If the pH of a natural water is 7.8, and the alkalinity was measured to be 125 meq/L, determine the following: - Alkalinity as mg/L CaCo3 - Approximate the total carbonate concentration (Ct), in moles per liter.

  What are the predominant types of bond in each category

what are the three meterials based on the predominant types of bond and what are the predominant types of bond in each category

  Determine what is the turbidity of the original sample

A wastewater sample was diluted by turbidity free water; 5ml was diluted to 250 ml. Turbidity of the diluted sample was 2.3 NTU, what is the turbidity of the original sample

  Calculate the time needed for the particles to set

For a temperature of 10 degree C, calculate the time needed for the following particles to settle 0.3m: a) a 20um mineral particle with a specific gravity of 2.1, and b) a 2 um organic particle with a specific gravity of 1.2

  Determine the specfic work required in kj per kg

Saturated water vapor at 150 deg C is compressed in a reversible steady-flow device to 1000 kPa while its specific volume remains constant. Determine the specfic work required in kJ/kg. The heat transfer is not negligible.

  Determine what is the removal efficiency of the incinerator

A hazardous waste incinerator is to burn 200 Kg/h of PCB waste that is 30 % PCB and 70 % organic solvents. During testing phase, the concentration of PCB in the emission was recorded as 0.025 g/ m³

  Discuss the advantages and disadvantages of attached growth

Biological treatment processes for wastewater can be catogarised as dispersed growth and attached growth systems. Discuss the advantages and disadvantages of attached growth systems over dispersed growth systems.

  Determine the magnitudes of the normal force acting on block

The coefficient of kinetic friction between block A and the inclined plane is mu_k = 0.11 . The angle of the inclined plane is given by theta = 45. Neglect the weight of the rope and pulley. Part A - Normal Force Acting on Block A Determine the ma..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd