Calculate the elevation head

Assignment Help Civil Engineering
Reference no: EM13550402

An 8-inch water main with a flow rate of 14 ft3/sec raises 100-feet. At the beginning of the main the pressure is 110 psig and drops to 50-psig at the end. The calculated Hl = 11.7 m.

a.) Elevation Head

b.) Pressure Head

c.) Velocity Head

Reference no: EM13550402

Questions Cloud

Determine the rate of change of density in the tire : Air at 37 psi and 60oF is being forced into a tire at a velocity of 180 ft/s through a ¼ in. diameter opening. The tire has a volume of 17 ft3. Determine the rate of change of density in the tire. (3.01 *10-5 slugs/ft3 s)
A tank with a 3m diameter has an 8 cm orifice at the bottom : A tank with a 3m diameter has an 8 cm orifice at the bottom. The tank is currently filled with water to a height of 2.5m above the orifice. If the orifice is opened.
Consider a metal single crystal oriented such that : Consider a metal single crystal oriented such that the normal to the slip plane and the slip direction are at angles of 42.1* and 48.9*, respectively, with the tensile axis. If the critical resolved shear stress is 18.2 MPa (3000 psi)
A computer technician can handle on average 5 service calls : In a large university computing center, on average there are 10 service calls per day. A computer technician can handle on average 5 service calls per day. The cost of adding a technician
Calculate the elevation head : An 8-inch water main with a flow rate of 14 ft3/sec raises 100-feet. At the beginning of the main the pressure is 110 psig and drops to 50-psig at the end. The calculated Hl = 11.7 m.
How many units are in process at may 31 : How many units are in process at May 31, what is the unit materials cost for May and what is the unit conversion cost for May?
How much will monthly profits increase or decrease : how much will monthly profits increase or decrease and what unit cost is relevant for establishing a minimum selling price for these units?
What is the current share price : the company expects to maintain a constant 8.3% growth in dividends forever. If the required return on Hawke's Bay's ordinary shares is 9%, what is the current share price?
Prepare an income statement for september : Prepare an income statement for September, an owner"s equity statement for September, and a balance sheet at September 30.

Reviews

Write a Review

Civil Engineering Questions & Answers

  What fraction of the tank air mass will be consumed

The divers work at a depth of 15 m and the seawater density is 1027 kg m-3. They are known to consume 130 litres of air at the ambient temperature is 10oC over the time taken to do the job.

  Calculate the vertical displacement of joint b

Ignoring both axial and shear deformations and using the unit force method, calculate the vertical displacement of joint B.

  Determine what is the flexural strength of the rod

A 3-point bending test is performed on a 10 mm diameter rod of Silicon Carbide. The distance between the supports is one foot. If the load at fracture is 10,000N, what is the flexural strength of the rod

  Calculate the pressure in the constriction in a pipe

When 0.3 m^3/s water flows through a 150 mm constriction in a 300 mm horizontal pipeline, the pressure at a point in the pipe is 345 kPa, and the head loss between this point and the constriction is 3 m.

  How long would it take to reduce h2s concentration

It has been determined experimentally that the reaction follows frst order kinetics with respect to both oxygen andhydrogen sulfide concentrations: d[H2S]/dt =-k[H2S][O2]

  Determine the mass and stiffness of the undamped system

The mass m, stiffness k, and natural frequency fn of an undamped SDF system are unknown. These properties are to be determined by harmonic excitation tests. at an excitation frequency of 4 Hz, the response tends to increase without bound.

  Determine the time it takes for the particle to come to

A particle is traveling in a straight line at a constant speed of 22.9 m/s. Suddenly, a constant force of 10.7 N acts on it, bringing it to a stop in a distance of 63.6 m.

  What length of existing level highway must be reconstructed

at a railroad crossing, an overpass must be built centered over the tracks at a height of 24ft and be 200ft long. the existing highway has a design speed of 50mi/hr.

  What would be the reading on a barometer containing benzene

What would be the reading on a barometer containing Benzene at 20 degrees Celsius at a time when the atmospheric pressure was equivalent to 12.3 m of water

  Calculate the rate of change of water mass in the segment

The segment of river shown has a rectangular cross-section, with width 50 ft. The river bed is at angle theta=10 degrees from horizontal. The average velocity is 2 ft/s at the upstream end, and 3 ft/s at the downstream end.

  Estimate diameter of largest particle that can be removed

A grit chamber is designed for a flow-through velocity of 0.30 m/s, a depth of 0.9 m, and a length of 10.5 m. If inorganic particles have a specific gravity of 2.65,

  Determine what should be the diameter of each basin

A 4 mgd water treatment planet is being designed for an overflow rate of 0.5 gpm/ft^2. If two circular sedimentation basins will be used at al times, what should be the diameter of each basin

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd