Calculate the depth of water at each end of the tank

Assignment Help Civil Engineering
Reference no: EM13322543

A rectangular tank 2.0m wide, 4m long, and 2m deep contains water to a depth of 1.0m It is accelerated horizontally at 3m/s^2 in the x direction.
a.Calculate the depth of water at each end of the tank
b.Calculate the total force on each end of the tank

Reference no: EM13322543

Questions Cloud

Calculate the impulse delivered to the ball during impact : A steel ball with a mass of 50.0g is dropped from a height of 2.30m onto a horizontal steel slab. The ball rebounds to a height of 1.40, Calculate the impulse delivered to the ball during the impact
Determine the magnitude r of the vertical resultant force : determine the magnitude Fs of the tensile spring force in order that the resultant of Fs and F is a vertical force . Determine the magnitude R of this vertical resultant force.
Determine the size of pipe for a water temperature : The difference in water level is 60ft. Determine the size of pipe for a water temperature of 60 degrees Fahrenheit. Apply The Darcy-Weisbach equation.
What is the change in the total kinetic energy of two balls : A ball with a mass of 0.620kg is initially at rest. It is struck by a second ball having a mass of 0.405kg , What is the change in the total kinetic energy of the two balls
Calculate the depth of water at each end of the tank : A rectangular tank 2.0m wide, 4m long, and 2m deep contains water to a depth of 1.0m It is accelerated horizontally at 3m/s^2 in the x direction. a. Calculate the depth of water at each end of the tank
The most difficult tasks of management : 1. Effectively changing strategies is often one of the most difficult tasks of management. Why do you think this is the case?
What is the direction of the magnetic force : A wire carries current to the north (towards the top of the computer screen) through a magnetic field. what is the direction of the magnetic force on the current-carrying wire
Estimate the strength of the field : A 2 meter wire carrying 1 A of current is at a 90 degree angle to a magnetic field. If the current feels a force of 1 N from the magnetic field, what is the strength of the field
Find the total current carried by the wire : A wire of radius R carries a current with density: J =C(R-r). Find the total current carried by the wire

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the depth of water in the pond

water is pumped into an irrigation pond at 250 gal/min for 24 hours. the pond area is 2500 square feet. Determine the depth of water in the pond .Provide answer in ft and m

  What is shear force exerted by oil on m long section of pipe

the flow profile is such that u=u(max)*(1-(r/R)^2) where u is the flow speed and r is the distance from the centre of the pipe in the radial direction. What is the shear stress on the pipe wall What is the shear force exerted by the oil on a 1m lo..

  Determine groundwater flow per unit width of the aquifer

The piezometer A is located 4,000 ft south of piezometer B.  Approximately 3,000 ft of piezometer B there is a river with an elevation relative to sea level of about 455 ft.

  Determine possible values for the remaning direction angle

A person of dubious technical ability tells you that two of the direction angles for a particular vector are 30 and 40 degrees. If these direction angles are feasible, then determine the possible values for the remaning direction angle.

  Compute the maximum acceptable tensile service load

Compute the maximum acceptable tensile service load T that may act on a single angle L6x4x3/4 that is welded along only one leg to a gusset plate; thus, there are no holes. The service load is three times the dead load. Solve for a0 A36 steel.

  Will the quality of the coarse aggregate increase

To adjust the mix so as to increase the compressive strength, the water-to-cement ratio is reduced to 0.45. Will the quality of the coarse aggregate increase, decrease, or stay the same

  Determine the distance downwind to reach the maximum so2

A 45-percent efficient, coal-fired power plant generates output power of 1000 MW (106 kW) and emits SO2 at the legally allowable rate of 0.6 lb SO2 per million BTU of heat into the plant. The stack has an effective height of 250 m.

  What would height be after it was consolidated into packing

A 1m thick layer of this soil is packed so that it is as loose as possible (void ratio, e_max ~= 0.9), and then it was vibrated until it was as dense as possible (void ratio, e_min ~= 0.35).

  Estimate the radon concentration in the crawl space

The emission rate of radon into the crawl space is reported to be 0.6 pCi/m^2-s. An exhaust system was added to provide 1 air exchange per hour (ACH) in the crawl space. The outdoor concentration of radon is 1 pCi/L.

  What minimum angular velocity is necessary to keep the water

A bucket full of water is to be rotated in the vertical plane. What minimum angular velocity, in rad/s, is necessary to keep the water inside if the rotating arm is 120 cm

  Calculate the mass flow rate for the concentrate stream

A magnetic separator processes 500 kg/hr of finely ground magnetite ore (Fe3O4). The ore containes 35% magnetite and an analysis of the concentrate and tailings shows that they contain 59.5% Fe and 3.8% Fe

  Determine what is the temperature in the tire after driving

The temperature when the tires were in flated was 25 F. Assuming no change in air mass or volume, what is the temperature (F) in the tire after driving yesterday is a pressure on 44 psig was measured

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd