Calculate the angular velocity w of the cylinder

Assignment Help Civil Engineering
Reference no: EM13310180

The solid circular disk of uniform thickness is released from rest on the 60-degree incline. Calculate the angular velocity w of the cylinder and the magnitude v of the velocity of its center C after it has moved 10 ft down the incline. The coefficient of friction is m = 0.3 and the radius of the disk is R = 6 in.

Reference no: EM13310180

Questions Cloud

Description of des encryption feistel structure algorithm : Prove that y’ = c(y) (i.e., if we complement the plaintext and the key, then the ciphertext is also complemented). [This is Question 3.3 of the textbook. Hint: this can be proved using the “high-level” description of DES encryption Feistel structure ..
Estimate the gas pressure : 2.90 mol of gas is at a temperature of -180 C and fills a 3.90 L container. What is the gas pressure
Determine what are the discharge and the flow veloctiy : An 18in. diameter sewer is placed on a grade of 1.5ft/1000ft. What are the discharge and the flow veloctiy when the pipe is full
Compute the temperature of the solution after the cacl2 : calculate the temperature of the solution after the CaCl2 dissolves. (Assume no heat is lost to the container or the surroundings and the specific heat of the solution is the same as that of water.)
Calculate the angular velocity w of the cylinder : The solid circular disk of uniform thickness is released from rest on the 60-degree incline. Calculate the angular velocity w of the cylinder and the magnitude v of the velocity of its center C after it has moved 10 ft down the incline.
Find the maximum power developed in the coil : A circular coil of wire with 70.0 Loops and a radius of 0.250 m is placed in a magnetic field of 10.0 T and oriented so that the coil is perpendicular to the field. Find the maximum power developed in the coil
Determine the coordinates of intersection of line of action : Replace the given forces by a wrench and determine the coordinates of the intersection of its line of action (the coordinate of point P) with the plate. With a Force Fca=(100i+100j)N coming off of point C
At what speed in stillwater will cavitation first occur : A sphere L ft in diameter is moving horizontally at a depth of 12 ft below a water surface where the water temperature is 50°F. v max = 1.5 V0. where V0. is the free stream velocity and occurs at the maximum sphere width.
What would be the magnitude of the current in the diode : You put a diode in a microelectronic circuit to protect the system in case an untrained person installs the battery backward. what would be the magnitude of the current in the diode

Reviews

Write a Review

Civil Engineering Questions & Answers

  How much benzene can be optimally removed by the gac filter

A municipal water supply became contaminated with benzene (Cw=50g/L). It was decided that until the contaminant source could be identified and remediated, all household faucets would be fitted with a granular activated carbon(GAC) filter bed to ad..

  How high can that person climb the ladder before the slip

A ladder is supported by a horizontal floor and a vertical wall. Is 15 feet long and weighs 50 lbs, with the weight concentrated at its midlength. The ladder supports a person weighing 180 lbs.

  What volume of leachate is being added to the river each day

A landfill is located 500 km from a river whose surface elevation is 40 m lower than the ground elevation at the landfill. After several years it is discovered that leachate from the landfill, with a COD of 1300 mg/L, is leaking into the river.

  What is the maximum height

The height (in meters) of a projectile shot vertically upward from a point 2 m above ground level with an initial velocity of 24.5 m/s is h2+24.5t-4.9t^2 after t seconds. a) When does the projectile reach its maximum height? b) What is the maximum..

  Average waiting time in the queue

What is the average length of queue, the average time spent in the system, and the average waiting time in the queue?

  Prepare an outline of the experimental design

Prepare an outline of the experimental design you will suggest to the plant manager. This outline should contain research rationale, aims and objectives, research methodology, nature of data analysis and interpretation, and possible outcomes/concl..

  Determine the value of the dynamic viscosity at conditions

Start from the values for the density and the kinematic viscosity of CO2 at 15o C and standard atmospheric pressure (101.3 kPa), and first determine the value of the dynamic viscosity at the same conditions.

  Find probability of atleast one tractor is in good condition

A construction firm purchased 3 tractors from a certain company. At the end of the fifth year, let E1, E2, E3 denote, respectively, the events that tractors no. 1, 2, and 3 are still in good operational condition.

  Resultant force from all fluids

A tank is filled with oil (specific gravity 0.8) and water to a depth of 10 meter and 6 meter respectively. Find the resultant force from all fluids acting on the gate of 1.8 meter by 9 meter.

  Heat exchanger second-law efficiency

The condenser in a refrigerator receives R-134a at 700 kPa and 50C, and it exits as saturated liquid at 25 C, The flow rate is 0.1 kg/s,and the condenser has air in at an ambient temperature of 15 C and leaving at 35 C. Find the minimum flow rate ..

  Estimate the power in watts that can be produced by turbine

Estimate the power in watts that can be produced by the turbine. Hint: In a time interval Dt,the amount of mass that flows through the rotor is Dm=mDt ,and the corresponding amount of kinetic energy in this flow is (Dm*V square/2)

  Determine the power input into the heat pump

A heat pump that operates on the ideal vapor compression cycle with refrigerant 134a is used to heat water from 16 to 56 degrees Celsius at a rate of 0.20kg/s. The condensor and evaporator pressures are 1.5 and 0.35 Mpa, respectively.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd