Calculate how much water would the aquifer produce

Assignment Help Civil Engineering
Reference no: EM13313446

The specific storage of a 45-m thick confined aquifer is 3.0 X 10^-5 m^-1. How much water would the aquifer produce if the piezometric surface is lowered by 10 m over an area of 1 km^2?

Reference no: EM13313446

Questions Cloud

Find the energy stored in the capacitor when fully chaged : A 0.350-{\rm m}-long cylindrical capacitor consists of a solid conducting core with a radius of 1.25mm, Calculate the energy stored in the capacitor when fully charged
Determine max value of dz if the flow is to remain laminar : The slope of the hill is such that for each 1.5 km of horizontal distance, the change in elevation is dz meter. Determine the maximum value of dz if the flow is to remain laminar, with a temperature of T=20°C and pressure all along the pipe is con..
What is the time period of a single beat of the flys wings : a fly beats its wings at a frequency of 1200 Hz. if the expansion and contraction of the wing muscles of the fly exhibits simple harmonic motion, what is the time period of a single beat of the flys wings
Create necessary ruleset to use within snort to fire alert : Pick a web site that fits one or more of the prohibited categories above (or something similarly likely to fall on the wrong side of "acceptable use"), and create the necessary ruleset to use within Snort to fire an alert.
Calculate how much water would the aquifer produce : The specific storage of a 45-m thick confined aquifer is 3.0 X 10^-5 m^-1. How much water would the aquifer produce if the piezometric surface is lowered by 10 m over an area of 1 km^2
What is the speed at which the spring leaves the wall : a spring is pressed against a wall so that it is compressed by 0.25 m (ie it is 0.25 m shorter than its equilibrium length). what is the speed at which the spring leaves the wall
Determine water level rise in an unconfined aquifer produced : Determine the water level rise in an unconfined aquifer produced by a seasonal precipitation of four inches. The aquifers porosity is 20 percent and its specific retention is 9 percent.
How long does it take for platform to make one revolution : A spring scale on a rotating platform indicates that the horizontal force on a 0.606 kg mass is 1.57 N, How long does it take for the platform to make one revolution
Determine what is the void ratio of the soil : In its natural state, a moist soil has a volume of 0.33 ft3 and weighs 42.55 lb. The oven-dried weigth of the soil is 35.56 lb. If Gs = 2.63, what is the void ratio of the soil

Reviews

Write a Review

Civil Engineering Questions & Answers

  Find the diamensions b and a with balanced stress

A reinforced concrete beam d = 18 in , and n = 10. find the diamensions b and a , that will resist a bending movement of 60 kip,ft with balanced stress reinforcement if fc =1600 psi and fs = 20 ksi

  Write a balanced net equation for the reaction

Write a balanced net equation for the reaction of the hydrogen ascorbate anion with water where hydrogen ascorbate acts as an acid.

  Estimate the minimum absolute pressure that can develop

When water at 70C flows through a convergingsection of pipe, the pipe pressure decreases in the direction of flow. Estimate the minimum absolute pressure that can develop without causing cavitation.

  Find what is the total force on the roof at collapse

a storage tank has a diameter of 80 ft, a height of 25ft and contains oil to a height of 15ft. the suction pumps, which can handle 15000bbl/d, are started, but the safety valves are clogged and a vacuum is drawn in the tank.

  Compute the flow rate in the channel and the critical depth

The water depth before the jump is 0.4 m and after the jump is 1.7 m. Compute the flow rate in the channel, the critical depth and the headloss in the jump.

  Force required to hold the pipe

A 0.3-m diameter pipeline terminates in a nozzle of outlet diameter = 0.15 m. When water flows through this pipe at a rate of 0.25 m3/s, the force required to hold the pipe (N) is most nearly.

  Calculate the amplitude f0 of sinusoidal excitation force

calculate the amplitude F0 of the sinusoidal excitation force that is necessary to produce a steady-state vibration with a velocity amplitude of 10 m/s at resonance

  Compute evaporation rates in the winter and in the summer

At a certain location during the winter, the average air temperature is 10 degrees celcius and the net radiation is 40W/m^2 and during the summer the net radiation is 200W/m^2 and the temperature is 25 degrees celcius.

  Determine what fraction of the cyanide is in the cn-form

The sodium cyanide solution ([NaCN]-total = 0.01 M) is kept at pH 10.4. The pH is kept high to keep the cyanide in the CN- form. If CN protonates by the reverse of the HCN dissociation reaction,

  Density specifications under average operating conditions

Calculate the compacted cubic yards per hour if a compactor with a 5-ft drum width travels at 3 mph over a 10-in. lift of aggregate base course with 4 passes required to meet density specifications under average operating conditions.

  Calculate the level at tpl of a vertical crest curve

A vertical crest curve has an approach grade +6% and a departure grade -6%. The Vertical intersection point level is 125 m. It is proposed to use a curve 720 m long. Calculate the level at TPl.

  Total mass-quality of steam-specific volume

Find the total mass, quality of steam, specific volume, specific enthalpy, and specific internal energy.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd