Calculate change in ph of rainwater resulting from increase

Assignment Help Civil Engineering
Reference no: EM13317813

Calculate the change in pH of rainwater resulting from an increase in the PCO2 from 10-3.5 atm to 10-3.0 atm due to fossil fuel emissions.

Reference no: EM13317813

Questions Cloud

Find the fraction of the nitrogen that is in the ammonia : a. Find the fraction of the nitrogen that is in the ammonia (NH3) form (and hence strippable) as a function of pH. Include a table AND a graph. b. If the wastewater pH is raised to 10 and the atmospheric ammonia partial pressure
What will be the rate of return earned by most firms in the : In long-run equilibrium, most firms (the ones that remain from the original 298) will earn the normal % rate of return.
How far are the goggles from the edge of the pool : It's nighttime, and you've dropped your goggles into a swimming pool that is 3.0m deep. If you hold a laser pointer 1.2m above the edge of the pool, How far are the goggles from the edge of the pool
Calculate ct the total dissolved inorganic carbon : Suppose the gas above the soda in a bottle of a soft drink is pure CO2 at a pressure of 2 atm. a. Estimate the pH of the soda. b. Calculate CT, the total dissolved inorganic carbon.
Calculate change in ph of rainwater resulting from increase : Calculate the change in pH of rainwater resulting from an increase in the PCO2 from 10-3.5 atm to 10-3.0 atm due to fossil fuel emissions.
Calculate the change in the sound intensity level : A listener increases his distance from a sound source by a factor of 3.03. what is the change in the sound intensity level in dB
Compute the drift speed of the electrons in the wire : An aluminum wire having a cross-sectional area equal to 3.20X10^-6 m^2 carries a current of 6.50 A. Find the drift speed of the electrons in the wire
Find required size of new schedule 40 steel pipe to carry : Determine the required size of new Schedule 40 steel pipe to carry 0.5 cfs (Q = 0.5 cfs) of water at 160o F with a maximum pressure drop of 10 psi per 1,000 ft.
Information management in international operations : Critically analyse the theory, concepts and models of operations and information management; Demonstrate an understanding of the importance of information management in international operations;

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine how to calculate ph of water at 25 degrees

How do you calculate pH of water at 25 degrees that contains 0.6580mg/l carbonic acid. Assume that [H+] =[HCO3-]at equilibriumand ignore the dissociation of water.

  Average shearing stress

Two strips of a plastics material are bonded together as shown. The average shearing stress in the glue must be limited to 1000 kpa.

  Determine the volume of sludge after filtration

Assume that the sludge does not change density during filtration and that liquid removed from the sludge contains no sludge. Using mass-balance method. determine the volume of sludge after filtration.

  How many gallons of water are contained in the tank

Develop a table that shows: 1) How many gallons of water are contained in the tank if the volume is measured in increments of 1 ft from the bottom to the top. 2) The mass of water at each increment, expressed in lbm.

  Determine the service rate for six vehicles per minute

Vehicles begin to arrive at a toll booth at eight vehicles per minute from 9 A.M. to 10 A.M. The booth opens at 9:10 A.M. and services at a rate of ten vehicles per minute until 9:40 A.M. From 9:40 A.M. until 10 A.M.

  How long would figure soil will take to reach contamination

The local engineer concludes that, since the oil must have been destroyed by the soil microorganisms at a rate of 20 mg/kg each year, in one more year the site will be free of all contamination. a. Is this a good assumption

  Find the total energy cost and savings from cfl bulbs

A CFL bulb that puts out as much light as a 60-W incandescent bulb might costs $10, compared to about $1 for the incandescent bulb. But CFL bulbs are expected to last (on average) 15,00 hours, compared to about 1000 hours for an incandescent bulb.

  What is the diameter of the hole in the aluminum plate

A hole is drilled in an aluminum plate with a steel drill bit whose diameter is 6.245 cm at 20 degrees Celsius. In the process of drilling, the temperatures of the drill bit and plate rise to 168 degrees Celsius.

  What would be the maximum concentration in the air in units

The chemical 1,4-dichlorobenzene (1,4-DCB) is sometimes used as a disinfectant in public lavatories. At 20°C (68°F) the vapor pressure is 5.3 × 10-4 atm. (a) What would be the maximum concentration in the air in units of g/m3

  Calculate the compressive strength of the concrete

A concrete cylinder of height 8 inches and diameter of 4 inches was tested in the lab. The maximum compressive force was found to be 150,000 lbs and a tensile force of 25000 lbs.

  How much will be in the account at the end of 5 years

If you deposit $1000 per month into an investment account that pays interest at a rate of 6% per year, compounded quarterly, how much will be in the account at the end of 5 years

  How kinematic and diffusion wave model been used

how kinematic and diffusion wave model been used for rainfall runoff modelling. main computer programme involved.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd