Assume that the change in kinetic energy is negligible

Assignment Help Mechanical Engineering
Reference no: EM13628768

Liquid water(H2O) at 200 KPa and 20oC is heated in a chmaber by mixing it with a steam (H20) at 200 KPa and 150oC. The liquid water enters the mixing chamber at a mass flow rate of 2.5 kg/s and the steam enters the mixing chamber at a mass of 0.2 kg/s. The mixture leaves the chmaber at 200 KPa and 60oC. The mixing chamber operates steadily and there is no work interaction involved in the mixing process. Assume that the change in kinetic energy is negligible. Determine the magnitude and direction of heat transfer rate during the process.

Reference no: EM13628768

Questions Cloud

A rigid tank of cold fluid sits in a room at 300 k t the : a rigid tank of cold fluid sits in a room at 300 k t... the fluid is initially at 180 k t.. the luis temperature is
The resistance of a very fine tungsten wire with a 10 : the resistance of a very fine tungsten wire with a 10 micro m x 10micro m square cross section is 2978 ohm how long is
The hot dog cooker described in the chapter heats hot dog : the hot dog cooker described in the chapter heats hot dog by connecting them to 91 v house hold electricity. a typical
Two draws will be made at random from a box containing 5 : 1. two draws will be made at random from a box containing 5 marbles red yellow green black and blue. the unconditional
Assume that the change in kinetic energy is negligible : liquid waterh2o at 200 kpa and 20oc is heated in a chmaber by mixing it with a steam h20 at 200 kpa and 150oc. the
A particle moves along a straight line with an : a particle moves along a straight line with an acceleration of a 53s13 s52ms2 where s is in meters. determine the
The total charge a household battery can supply is given in : the total charge a household battery can supply is given in units of mahr. for example a 11v alkaline battery is rated
Suppose that a device stops working if one of its five : suppose that a device stops working if one of its five components fails and suppose that the lifetimes of the five
A 9853 cm long heating wire is connected to a 138 v outlet : a 98.53 cm long heating wire is connected to a 138 v outlet. if the wire dissipates 79.5 w what is the current in the

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Estimate the percentage of fabric samples that will have a

data analysis of the breaking strength of a certain fabric shows that it is normally distributed with a mean of 300 lb

  What is the k.e. of the satellite

A satellite has been placed in a circular, sun-synchronous orbit at an altitude of 1300.0 km. The satellite has a mass of 5,000.0 kg. What is the K.E. of the satellite?

  Predict the relationship between load and output voltage

Explain any anomalies - differences from theory or what you thought should happen. Is a linear approximation sufficient to describe and predict the relationship between load and output voltage?

  Determine the volume of the tank in m3 and the final

five kilograms of water are contained in a closed rigid tank at an initial pressure of 20 bar and a quality of 50. heat

  Now the valve is opened and the entire system is allowed to

a 2 m3 tank containing nitrogen at 25oc and 500kpa is connected through a valve to another tank containing 3kg of

  Explain the different experimentpurpose of this practical

explain the different experiment.purpose of this practical is to verify the law for parallelogram of forces law for

  Define outage occurred at a water distribution pump station

A power outage occurred at a water distribution pump station. Before the power outage the station was pumping with one pump at 6,000 gpm in a 18" diameter Steel Pipe

  Water at a flow of m 215 kgs is cooled from 82 degrees c

water at a flow of m .215 kgs is cooled from 82 degrees c to 42 degrees c by passing it though a thin-walled tube of

  Aensing or measuring device is malfunctioning

What are the methods used to determine if a sensing or measuring device is malfunctioning ?

  Determine the average shearing stress in the bolts

a beam consists of three planks connected as shown by 3/8 in diameter bolts spaced every 12in.along the longitudinal axis of the beam.knowing that the beam is subjected to a 2500lb vertical shear, determine the average shearing stress in the bolts..

  What are the mean and standard deviation of their

15000 monodisperse particles are released simultaneously and allowed to settle in still air for 5 min. if the particles

  Find the crank position corresponding to the maximum piston

a find the crank position corresponding to the maximum piston velocity for an in-line slider crank mechanism. crank

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd