A shell-and-tube heat exchanger consisting of one shell

Assignment Help Mechanical Engineering

Reference no: EM13630978

A shell-and-tube heat exchanger consisting of one shell pass and two tube passes is used to transfer heat from an ethylene glycol-water solution (shell side) supplied from a rooftop solar collector to pure water (tube side) used for household purposes. The tubes are inner and outer diameters Di=3.66 mm and Do=3.8 mm, respectively. Each of the 100 tubes is 0.8 m long (0.4 m per pass), and the heat transfer coefficient associated with the ethlyene glycol-water mixture is ho=11,000 W/m2 * K.

a) For pure copper tubes, calculate the heat transfer rate from the ethylene glycol-water solution (m=2.5 kg/s, Th,i=80oC) to the pure water (m=2.5 kg/s, Tc,i=20oC). Determine the outlet temperatures of both streams of fluid. The density and specific heat of the ethylene glycol-water mixture are 1040 kg/m3 and 3660 J/kg * K, respectively.

b) It is proposed to replace the copper tube bundle with a bundle composed of high-temperature nylon tubes of the same diameter and tube wall thickness. The nylon is characterized by a thermal conductivity of kn=0.31 W/m * K. Determine the tube length required to transfer the same amount of energy as in part (a).

Reference no: EM13630978

Questions Cloud

If a force gauge placed halfway down the rope reads out a : magnus has reached the finals of a strength competition. in the first round he has to pull a city bus as far as he can.

A simple ideal brayton cycle with air as the working fluid : a simple ideal brayton cycle with air as the working fluid has a pressure ratio of 11. the air enters the compressor at

Use the work-energy theorem to calculate the mass of the : a hardworking ant must supply 0.00805 n to pull a small piece of fruit at constant velocity over a distance of 8.20 cm

Determine the force in each of the members connecting : determine the force in each of the members connecting joint a through f of the vaulted roof truss shown. state whether

A shell-and-tube heat exchanger consisting of one shell : a shell-and-tube heat exchanger consisting of one shell pass and two tube passes is used to transfer heat from an

A uniform rod of mass m 4310 g and length l 311 cm : a uniform rod of mass m 431.0 g and length l 31.1 cm stands vertically on a horizontal table. it is released from

1 kg of steam occupies a volume of 02 m3 at 9 bar in a : 1 kg of steam occupies a volume of 0.2 m3 at 9 bar in a closed system. the steam is then heated at constant pressure

Calculate the amounts of ferrite cementite primary : a 1030 steel is given an improper quench and temper heat treatment producing a final structure composed of 60

A house is to be maintained at 23 degrees c when the : a house is to be maintained at 23 degrees c when the outside temperature drops to zero degrees c. the house which loses

User Account

All Pages