### A mixing chamber steadily mixes a hot water stream at

Assignment Help Mechanical Engineering
##### Reference no: EM13630868

A mixing chamber steadily mixes a hot water stream at 80°C and 0.5kg/s rate with a cold water stream at 20°C. If the leaving mixture is at 42°C and mixing happens at 250kPa, determine the mass flow rate of the cold water stream.

### Previous Q& A

#### A nozzle with inlet area of 800 cm2 and inlet steam

a nozzle with inlet area of 800 cm2 and inlet steam velocity is 10ms. the steam pressure is 800kpa and temperature is

#### Using the classical and relativistic expressions for

using the classical and relativistic expressions for kinetic energy calculate the range of velocities for a particle of

#### Knowing that the constant of eachspring is 2 knm determine

a 10-kg block is attached to spring a and connected to spring b bycord and pulley. the block is held in the position

#### A heat pump with a cop of 30 is used to heat air contained

a heat pump with a cop of 3.0 is used to heat air contained in a 1205.4m3 of well-insulated rigid tank. initially the

#### It is now cooled at constant volume to 200 deg c this

a system with an initial volume of 2 m is filled with water at 3 mpa 400 deg c.it is now cooled at constant volume to

#### A system executes a power cycle while receiving 1050 kj by

a system executes a power cycle while receiving 1050 kj by heat transfer at a temperature of 525 k and discharging 700

#### Determine the total mass of water remaining in the tank and

a 0.06m 3 rigid tank initially contains water at 1.5 mpa with a quality of 20. the tank is heated and a pressure

#### Determine the temperature or quality if a saturated mixture

steam enters one inlet of an adiabatic mixing chamber at 1.4mpa and 300 c. at the second inlet steam enters at 1.4mpa

#### An initially empty bottle is filled with water from a line

an initially empty bottle is filled with water from a line at 0.8 mpa 350 deg c. assuming no heat transfer and that the

#### 2 kg of saturated water vapor at 600 kpa are contained in a

2 kg of saturated water vapor at 600 kpa are contained in a piston-cylinder device. the water expands adiabatically

### Similar Q& A

#### Positive displacement and dynamic air compressors

With reference to basic constructional features, contrast the methods of compression employed by positive displacement and dynamic air compressors.

#### It is desired to put oil hole through a part subjected to a

it is desired to put oil hole through a part subjected to a stress field given by sigma xx 15 ksi sigma yy -15 ksi

#### Coming out of a factory chimney are the following gases

coming out of a factory chimney are the following gases co2 so2 o2 n2 h2o with volume percentage to be 13.5 0.3 5.2 76

#### Consider a spark ignition combustion engine with two

consider a spark ignition combustion engine with two possible configurartion for turbocharging. configuration a is

#### Steam enters an adiabatic turbine at 800 psia and 900f and

steam enters an adiabatic turbine at 800 psia and 900f and leaves at a pressure of 40 psia. determine the amount of

#### What equal monthly invesmet is required over a 50 year

what equal monthly invesmet is required over a 50 year period to achieve a balance of 2600000 in an investment account

#### Determine the bolt stiffness

Determine the bolt stiffness, the tube stiffness, and the joint constant C.

#### A sample of silty clay has a volume of 1488cm3 a total

a sample of silty clay has a volume of 14.88cm3 a total mass of 28.81 g a dry mass of 24.83 g and a specific gravity of

#### Differentiate between macroscopic and microscopic

differentiate between macroscopic and microscopic approaches. which approach is used in the study of engineering

#### A smoke stream from a smoke generating tube is often used

a smoke stream from a smoke generating tube is often used as a simple method of flow visualization in wind tunnels.

#### A fan drawing electricity at a rate of 15 kw is located

a fan drawing electricity at a rate of 1.5 kw is located within a well insulated 60 cubic meter rigid enclosure filled

#### What is the temperature cm from the base

What is the temperature 7 cm from the base if the rod is made of a) pure zinc b) lead c) pure gold. Which will be the hottest at this point?

#### Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd