Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
As shown below, a 20m long beam is fixed to a wall at point A, a linearly changing load from 10 kN/m (downward) at 10m to 0 kN/m at 20m, and a CW couple moment of 400kN·m located at 20m. Include all required FBD(s).
A. Solve for the supports at A.
B. Draw the shear and moment diagrams for the full beam
C. What is the location and value of absolute (positive or negative) maximum shear stress?
D. What are the locations and values of the absolute (positive or negative) maximum bending moment?
At the beginning of compression the pressure is 14 psi and the temperature if 60°F. The temperature at the end of combustion heat addition is 1500°F and the compression ratio is 9. Use constant specific heats at room temperature
A floor is to be supported on hardwood timber joists that are spaced at 0.5m centres and span 5.0m. The joists support flooring 20mm thick and an applied live load of 2kN/m2 Design a typical joint 50mm wide
what is the equation to get volume of cut and volume of fill if i used excel formulated , in construction methods.
The water table is at a depth of 1 m. Compute the effective normal stress and the shear stress acting on a plane rotated 60 degrees clockwise from the horizontal at a depth of 2.5 m in this deposit.
A clean-earth trapezoidal channel with a bottom width of 1.8 m and a side surface slope 1:1 is to drain water uniformly at a rate of 8 m^3/s to a distance ok 1 km. If the flow depth is not to exceed 1.2 m,
The 30-Mg freight car A and 20-Mg freight car are moving towards each other with the velocities of VA= 20km/h and VB=10 km/h. A spring mounted on A has k=3 MN/m Determine the maximum compression of the spring mounted on car A.
The barrel has an inner diameter of 4ft. Neglect its wall thickness. Assume that only the hoops resist the water pressure. Note: Water develops pressure in the barrel according to Pascal's Law, p=62.4 lb/ft^2, where z is the depth from the surface..
Determine the forces and stress in each member by using method of joints?
A reaction in a batch system is assumed to be first order. Data listed below was collected. Determine the reaction rate constant. chemical concentration (ug/L) time(min) 19.3 6
a piston moves a 25kg hammerhead vertically down 1m from rest to a velocity of 50m/s in a stamping machine. what is the total change in energy of the hammerhead
Two reservoirs are connected by a pipeline. The pipeline is 1 m in diameter and has a friction factor of 0.03. The elevation difference between the reservoirs is 30 m. The two reservoirs are 5 km apart.
The forces acting on the sailplane are represented by three vectors. The lift L and drag D are perpendicular. The magnitude of the weight W is 500 lb. If the magnitude of the resultant of the three forces is 0
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd