## short life cycle demand uncertainty - risk management, Mechanical Engineering

Assignment Help:
how I can formulate mathematically the risk management in demand uncertainty of short life cycle product.

#### Explain butt joints, Butt joints- formed by placing the plates edge to edge...

Butt joints- formed by placing the plates edge to edge and welding them. Grooves are sometimes cut (For thick plates) on the edges before welding. According to the shape of the gro

#### Inlet manifold-basic components of engine , Inlet Manifold: The pipe whic...

Inlet Manifold: The pipe which connects the intake system to the inlet valve of the engine through which air or air-fuel mixture is drawn into the cylinder is called the inlet ma

#### Determine the component of force , Determine the component of force: ...

Determine the component of force: The force of 500N is acting at a point subtends an angle of 60° with the horizontal. Determine the component of force along X and Y dire

#### Thermodynamics project , ES 347 - Thermodynamics Project Assigned: 3/28/201...

ES 347 - Thermodynamics Project Assigned: 3/28/2013 Due: 4/25/2013 Problem specification 5 kg of air is contained in a piston-cylinder device, initially at a pressure of 2MPa and a

#### Clutch free play-clutch complaints, Clutch free play : Check for free play ...

Clutch free play : Check for free play of the clutch lever. It should be within 10-20 mm.

#### Necessity of brakes , Necessity of Brakes To stop a vehicle in nor...

Necessity of Brakes To stop a vehicle in normal as well as emergency conditions. To slow down the speed to turn, pass hurdles etc.

#### Binomial distribution, Binomial distribution: Let X follow a binomial ...

Binomial distribution: Let X follow a binomial distribution with parameters n = 4 and p = 0.5. Tabulate P ( ¦X - μ¦ ≥ k ) and σ 2 /k 2 for k = 1,2,3,4,5 and verify that Cheby

#### Calculate the reactions at the bottom of the vessel, (a) What are the basic...

(a) What are the basic conditions for a body to be in state of equilibrium? (b) Two steel cylinders of similar diameter are supported in a rectangular vessel. The width of the v

how to start

#### Material hardness, how to measure material hardness

how to measure material hardness