What processing should be done on the computer to recover

Assignment Help Chemical Engineering
Reference no: EM13963534

A strap, instrumented to measure stretch, is worn around the chest to detect respiration whilst a subject is at-rest. The resulting signal is contaminated by electrical noise from the mains at 50 Hz with a similar amplitude to the respiration signal. Sketch what the contaminated signal might look like.

The signal is then sampled into a computer. Explain what the resulting digitised signal will look like (using sketches if required) if it is sampled at:

1. 50 Hz

2. 100Hz

3. 500 Hz

What processing should be done on the computer to recover the respiration signal?

What is the total solar power received by the box

Kyoto box is a simple solar oven used extensively in Africa. Assuming a square box with four reflectors of L = 75 cm, on a sunny day with direct sunlight from the zenith, wh

What mass of helium will be required.

A 1-liter container of nitrogen gas (N2) at a temperature of 23c is intially at a pressure of 1.25 atm. because of a slow leak the pressure falls to 1.15 atm 1 hour later wh

Calculate the entropy change for each of the following

10g of steam at l00°C and a pressure of one atmosphere condensing into water at the same temperature and pressure. (The latent heat of vaporization of water is 22571 Jg^-1).

What is the average molar specific heat in this range

The molar specific heat of many materials at low temperatures is found to obey the Debye law C_v = A[T/theta]^3 where A is a constant equal to 1.94 x 10^3 Jmol^-1K^-1 and wi

Heat capacity is an intensive quantity extensive quantity

The heat capacity is defined as the amount of energy required to change the temperature of an object. The specific heat capacity is defined as the amount of energy required

Pressure inside the vessel remains 38.6 kpa.identify liquid

A vessel holding some liquid is placed in a vacuum chamber that is constantly pumped. Gas leaks from the vessel into the vacuum through a small hole, radius 4.15 micro m, bu

Determine the concentration in the exiting

Determine the SO2 concentration in the exiting gas as a function of solvent flow rate from 25 to 175 mol/min and prepare a graph for our staff to use in operating this proce

At what distance from the ring''s center is e maximum

Charge is uniformly distributed around a ring of radius R= 2.40cm and the resulting electric field magnitude E is measured along the ring's central axis (perpendicular to th